B984052D-A534-45A9-8EC0-93163226C839.pdf

City of Columbus RFQ033726 Department of Public Service/Division of Traffic Management

Articulating Telescopic Aerial Device 40 ft.

BIDDER GUIDE

The following information is provided by the City of Columbus to assist you in navigating the formal bid procedures. This information is not to supersede or replace any of the actual bid specifications or requirements; its sole purpose is to provide information on the process. If you have any questions regarding the process, please contact the appropriate City of Columbus representative listed on the bid solicitation (for specification questions see instructions below).

Any addenda issued by the City of Columbus will be posted on this site. The City of Columbus will send notification of addenda to Bidders that have an active login id and password with Columbus Vendor Services and are registered for the commodity code(s) associated with this solicitation.

Though the notification methods above will be utilized to notify bidders of addenda it is ultimately the Bidder’s responsibility to check this site for verification of any issued addenda.

IN ORDER FOR YOUR BID TO BE CONSIDERED:

X Pricing is to be entered into the corresponding lines in the body of the RFQ

AND

The following documents must be completed and attached to your response. Complete this checklist to confirm the items required in your bid. Failure to submit the listed documents may be cause for rejection of your bid:

Completed Product Bid details (pages 6 - 15)

Reference Pages

Subcontractor Information

Experience Documentation

Literature

Warranty

Please refer to the Vendor Services User Guide for guidance using the Attachment feature to attach references, literature, warranty information and any other documentation as needed. ALL ATTACHMENTS MUST BE IN

PDF FORMAT TO ATTACH.

PLEASE NOTE – Per ORC Chapter 1703, to be awarded this bid you must show proof your company is registered and in good standing to do business in the State of Ohio through the Secretary of State, or provide a certified statement that your company falls within one of the exemptions in the Ohio Revised Code Chapter 1703.02. To register or check the status of your company go to https://www.ohiosos.gov/businesses/

Revised 2026

EQUAL OPPORTUNITY CLAUSE

The Contractor will not unlawfully discriminate against any employee or applicant for employment because of race, sex, sexual orientation, gender identity or expression, color, religion, ancestry, national origin, age, disability, familial status or military status. The Contractor will take affirmative action to ensure that applicants are employed, and that employees are treated during employment without regard to their race, sex, sexual orientation, gender identity or expression, color, religion, ancestry, national origin, age, disability, familial status or military status. Such action shall include, but not be limited to, the following: employment up-grading, demotion, or termination; rates of pay or other forms of compensation; and selection for training. The Contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices summarizing the provisions of this Equal Opportunity Clause.

The Contractor will, in all solicitations or advertisements for employees placed by or on behalf of the Contractor, state that the Contractor is an equal opportunity employer.

It is the policy of the City of Columbus that program members as defined in section 3901.01 of the Columbus City Codes shall have the maximum practicable opportunity to participate in the performance of contracts awarded by the City.

The Contractor shall permit access to any relevant and pertinent reports and documents by the Office of Diversity and Inclusion Director for the sole purpose of verifying compliance with

Title 39 of the Columbus City Codes, and with the Office of Diversity and Inclusion regulations.

All such materials provided to the Office of Diversity and Inclusion Director by the Contractor shall be considered confidential.

The Contractor will not obstruct or hinder the Office of Diversity and Inclusion Director or his/her deputies, staff and assistants in the fulfillment of the duties and responsibilities imposed by Title 39 of the Columbus City Codes.

The Contractor and each subcontractor will include a summary of this Equal Opportunity

Clause in every subcontract. The Contractor will take such action with respect to any subcontractor as is necessary as a means of enforcing the provisions of the Equal Opportunity Clause.

The Contractor agrees to refrain from subcontracting any part of this Contract or contract modification thereto to a contractor not holding a valid certification number as provided for in

Title 39 of the Columbus City Codes.

Failure or refusal of a Contractor or subcontractor to comply with the provisions of Title

39 of the Columbus City Codes may result in cancellation of this contract.

INFORMATION FOR BIDDERS

-3A- (INFORMATION FOR BIDDERS continued)

SPECIAL CONDITIONS

Special conditions included in the specifications, if inconsistent with provisions included in "Information for Bidders", shall take precedence over any provisions in "Information for Bidders" to the extent inconsistent.

SUBMISSION OF PROPOSAL

Responses must be entered and submitted electronically in the body of the RFQ. Some RFQs require pricing lists or additional documents to be attached to the RFQ response electronically. In rare instances documents require submission via regular mail delivery. Refer to the "Proposal Information" section of the specifications for instructions for submission. Any unauthorized conditions, limitations or provisions attached to the proposal may render the bid nonresponsive and result in its rejection.

ACCEPTANCE AND REJECTION

This proposal submitted by the bidder to the City of Columbus will be accepted or rejected within a period of 180 days from bid opening date.

The City reserves the right to waive technicalities, and to request a rebid on the required material. If more than one item, prices shall be quoted on the units requested. However, each item shall be considered a separate bid and the City reserves the right to award a contract on each item separately or on all items as a whole or any combination thereof. Bidders whose proposal is made on an "All or None" basis must clearly state such fact in the proposals.

Each RFQ issued by the City shall state that the RFQ may be cancelled and that any RFQ response may be rejected in whole or in part when it is for good cause and in the best interests of the City.

WITHDRAWAL OF PROPOSALS

Bidders may withdraw their RFQ response at any time prior to the time specified in the advertisement as the closing time for the receipt of bids.

However, no bidder shall withdraw or cancel his response for a period of 180 calendar days after said advertised closing time for the receipt of proposals.

DEFAULT PROVISION

In case of default by the bidder or the contractor, the City of Columbus may terminate and may procure the articles or services from other sources and hold the bidder or contractor responsible for any excess costs occasioned or incurred thereby.

SIGNATURE REQUIRED

By submitting this response electronically, bidder/proposer is affixing an electronic signature as defined by the Ohio Uniform Transactions Act.

Said signature represents that he/she has the authority to bind the entity to the terms and conditions contained herein.

APPLICABLE LAWS

The Revised Code of the State of Ohio, the Charter of the City of Columbus, and all City ordinances insofar as they apply to the laws of competitive bidding, contracts, and purchases, and wage theft prevention, are made a part hereof.

PRICING

Bidders are to quote firm or fixed prices for the duration of any contract which may be a result of this proposal unless otherwise noted in the specifications. In case of discrepancy in computing the amount of the bid, the UNIT PRICE quoted will govern.

Quotations are requested F.O.B. destination. If quoted F.O.B. Shipping Point include freight estimate and full value insurance cost.

CONTRACT AND BOND

The bidder to whom an award is made will be required to execute a written contract with the City of Columbus, Ohio within ten days after receiving such contract for execution, and if specified in the legal notice, furnish a good and approved bond conditioned upon the faithful performance of the same. The proposal, contract, proposal bond, (if applicable), and performance bond (if applicable) shall be in the form herein specified.

If, at any time during the continuance of the Contract, any surety shall, in the opinion of the Finance & Management Director, become irresponsible, then said Director shall have the right to require additional and sufficient surety or sureties. The Contractor shall furnish the surety or sureties to the satisfaction of the said Director, within ten (10) days after notice. In default thereof the default provision herein shall apply.

LIABILITY, INSURANCE, LICENSES AND PERMITS

Where bidders are required to enter or go onto City of Columbus property to deliver materials or perform work or services as a result of bid award, the bidder will assume full duty, obligation and expense of obtaining all necessary licenses, permits, and insurance when required.

The bidder shall be liable for any damages or loss to the City occasioned by negligence of the bidder (or his agent) or any person the bidder has designated in the completion of his contract as a result of his bid.

Particular attention is directed to the statutory requirements of the State of Ohio relative to the licensing of corporation organized under the Laws of any other State.

TAXES

Federal and/or State Taxes are not to be included in prices quoted. The successful bidder will be furnished an exemption certificate if needed.

SAMPLES

Samples, when requested, must be furnished free of expense to the City and if not destroyed, will upon request be returned at the bidder's expense.

DELIVERY

Time will be of the essence for any orders placed as a result of this bid.

Purchaser reserves the right to cancel such orders or any part thereof, without obligations if delivery is not made within the time(s) specified.

Delivery shall be made during normal working hours and to the destination shown on the proposal.

QUALITY

Unless otherwise stated by the bidder, the RFQ response will be considered as being in strict accordance with the specifications outlined in the Bid Document.

References to a particular trade, manufacturer's catalog or model number are made for descriptive purposes to guide the bidder in interpreting the requirements of the City. They should not be construed as excluding proposals on other types of materials, equipment and supplies. However, the bidder, if awarded the contract, will be required to furnish the particular item referred to in the specifications or description unless a departure or substitution is clearly noted and described in the proposal.

CHANGES AND ADDENDA TO BID DOCUMENTS

Each change or addenda issued in relation to this bid document will be published on the City’s Vendor Services website no less than five (5) working days prior to the scheduled bid opening date. In addition, to the extent possible, notice will be e-mailed to each person registered as having interest in the commodities selected for this bid. Total bid inquiry or specific item cancellations may be issued later than that time specified above.

WITHHOLDING OF INCOME TAX

All bidders are advised that in order for a contract to bind the City, each contract must contain the provisions found in Chapter 362 C.C.C.

with regard to income taxes due or payable to the City of Columbus for wages, salaries and commissions paid to the contractor's employees as well as requiring those contractors to ensure that subcontractors withhold in a like manner.

CAMPAIGN CONTRIBUTIONS

Contractor hereby certifies the following: that it is familiar with Ohio Revised Code (“O.R.C.”) Section 3517.13; that all applicable parties listed in Subsection (I) or (J) of O.R.C. Section 3517.13 are in full compliance with Subsection (I) and (J) of that Section; that it is eligible for this contract under the law and will remain in compliance with O.R.C. Section 3517.13 for the duration of this contract and for one year thereafter.

PUBLIC RECORDS REQUESTS

The City of Columbus, as a political subdivision of the State of Ohio, is subject to Ohio Revised Code Chapter 149, known as the Ohio Public Records Law. Consequently, the Offeror understands that ALL documents submitted in response to this solicitation are considered public records and WILL be released when a public records request is

INFORMATION FOR BIDDERS

-3B- (INFORMATION FOR BIDDERS continued) made by news media, competitors, or other interested parties, in accordance with the law. If you contend that certain CLEARLY MARKED portions of your response constitute an exception to Ohio’s public records law, you MUST submit your legal basis in support of that assertion with your response.

If a public records request is made for any portion of the documents that you have submitted and you have NOT clearly marked such documents as information constituting an exception to Ohio’s public records law, your information will be released immediately.

If a public records request is made for such information and you HAVE clearly marked portions of your response as information constituting an exception to Ohio’s public records law, AND you have submitted the legal basis supporting such claim, the City will release a redacted version of your information to the requestor and notify you that a request was made and that a redacted version of your response was released.

Should the requestor indicate that the redacted version is not sufficient for their purposes, you then will be IMMEDIATELY responsible for obtaining an order from a Court of competent jurisdiction in Franklin County, Ohio enjoining release of your clearly marked information constituting an exception to Ohio’s public records law.

If a public records request is made for such information and you HAVE clearly marked portions of your response as information constituting an exception to Ohio’s public records law, but you have NOT submitted the legal basis supporting such claim, the City WILL RELEASE your information to the requestor and notify you that a request was made and that your response was released.

DO NOT mark your entire response/submittal as information constituting an exception to Ohio’s public records law. If your entire response/submittal is so marked, the City of Columbus will not consider your offer.

INFORMATION FOR BIDDERS (Continued)

-3C- Revised 09-07-21

IN THE EVENT OF A CONTRACT

1. Where applicable according to the specifications successful seller shall transfer and deliver to City goods which conform to the specifications.

2. The City shall accept from seller goods that conform to the specifications, and shall pay for the goods in accordance with the terms of an agreement, which may result from this proposal.

3. The risk of loss from any causality to the goods regardless of the cause of the casualty shall be on seller until the goods have been delivered at the address designated in the order and are approved after inspection by the City.

4. Seller warrants and represents that seller has absolute and good title to and full right to dispose of the goods, and that there are no liens, claims, or encumbrances of any kind against the goods, and at the time of delivery shall be free from any security interests or other lien or encumbrance.

5. If there is a breach by seller of the warranty against encumbrances granted by seller in an agreement, which may result from this proposal, the City shall have the option to cancel an agreement, which may result from this proposal.

6. Seller shall defend any action brought against the City so far as the action is based on a claim that the goods, or any part of the goods, furnished under an agreement which may result from this proposal constitutes an infringement of any patent of the United States or a trademark. Seller shall be notified promptly in writing of the action and be given authority, information, and assistance, at the expense of seller, for the defense of the action. Seller shall pay all damages and costs awarded in the action. In case the goods or a part thereof are held to constitute infringement and the use of the goods or part thereof is enjoined, seller shall, at the expense of the seller, either procure for the City the rights to continue using the goods, replace the goods or a part hereof with non-infringing goods of equal or better quality, modify the goods so that the goods become non-infringing while continuing to meet or exceed the original specifications, or retake the goods and refund the purchase prices and the transportation and installation costs of the goods at the option of the City.

7. Seller warrants that (1) the goods to be supplied pursuant to an agreement which result from this proposal are fit and sufficient for the purpose intended, (2) the goods are merchantable, of a good quality, and free from defects, whether patent or latent, in material or workmanship and (3) the goods sold to the City pursuant to an agreement which may result from this proposal conform to the specifications. The particular purpose of which the goods are required may be set forth in the specifications.

8. The benefit of any warranty made in an agreement which may result from this proposal by seller shall extend to the City and to the employees of the City, any employee of the City may bring an action directly against seller for damages or injuries sustained by the employee resulting from any breach of warranty by seller.

9. All goods ordered shall be subject to final inspection and approval at the facility of the City designated for delivery. Any goods, which do not conform to the order of the City, may be rejected by the City.

The City may hold any goods rejected pending instructions from the seller or the City may return goods to seller at seller's expense.

10. If any tender or delivery by seller is rejected by the City for nonconformity, no notice of intention to cure can be effective unless it is received by the City agency within five (5) days after notice of rejection is sent to seller.

11. The liability of the City for either non-acceptance of conforming goods or repudiation of the agreement which might result from this proposal shall be limited to the difference between the market price at the time and place for tender of the goods and the unpaid sales price together with any incidental damages, but less expenses paid in consequence of the breach by the City.

12. An agreement which may result from this proposal shall not be modified or altered by any subsequent course of performance between parties or by additional terms contained in any subsequent documents unless said additional or differing terms are incorporated by contract modification authorized to be entered into by ordinance.

13. Contractor shall protect, indemnify and save the City harmless from and against any damage, cost, or liability, including reasonable attorneys’ fees, resulting from claims for any or all injuries to persons or damage to property arising from intentional, willful or negligent acts or omissions of Contractor, its officers, employees, agents, or Subcontractors.

14. The City will not indemnify the contractor and is prohibited from doing so.

15. This Contract may not be assigned or otherwise transferred to others by the Contractor without the prior written consent of the City.

If this Contract is so assigned, it shall inure to the benefit of and be binding upon any respective successors and assigns (including successive, as well as immediate, successors and assignees) of the Contractor.

16. The signatories to this Contract represent that they have the authority to bind themselves and their respective organizations to this Contract.

17. In the event either party is unable to perform its obligations under the terms of this Agreement because of acts of God, strikes, equipment or transmission failure or damage reasonably beyond its control, epidemics, pandemics, or other causes reasonably beyond its control, such party shall not be liable for damages to the other for any damages resulting from such failure to perform or otherwise from such causes.

LOCAL CREDIT

Pursuant to City of Columbus Ordinance # 2607-2012, in determining the lowest bid for a contract the local bidder credit will not be applied.

WAGE THEFT PREVENTION

Chapter 377 of the Columbus City Codes is hereby incorporated into the contract and seller is required to comply with said chapter. This includes, but is not limited to reporting requirements and the obligation to review the commission list of contractors and subcontractors that received an adverse determination. Penalties for failure to comply with the wage theft prevention code include suspension for three years, up to permanent disbarment.

CERTIFICATE OF TITLE ON EQUIPMENT

If applicable to this purchase, all documents required to obtain a State of Ohio Certificate of Title must be delivered to:

Fleet Management Administrator City of Columbus/Fleet Management Div.

4211 Groves Road Columbus, Ohio 43232

After signature by the Fleet Management Administrator, an original title is to be delivered to the above address within three (3) days. No payment for vehicles requiring a title will be authorized by the Fleet Management Administrator until a valid title is received.

REMEDIES

All claims, counterclaims, disputes and other matters in question between the City, its agents and employees, and the Contractor arising out of or relating to this agreement or its breach will be decided in a court of competent jurisdiction within the County of Franklin, State of Ohio.

OFFERORS TERMS AND CONDITIONS

Terms and conditions, submitted with this proposal, which are contrary to City Code or Charter shall be disregarded for the purpose of any subsequent contract. The successful bidder shall be notified as to which terms and conditions, if any, have been deleted.

PUBLICATIONS

The Contractor agrees to submit to the City’s Contract Administrator all advertising, sales promotion, and other publicity matters relating to this Contract wherein the City’s name is mentioned or language used from which the connection of the City’s name therewith may, in the City’s judgment, be inferred or implied. The Contractor further agrees not to publish, or use such advertising, sales promotion, or publicity matter without the prior written consent of the City except that may be required under law.

Department of Public Service, Division of Traffic Management

Detailed Specifications

1.0 SCOPE AND CLASSIFICATION

1.1 Scope: It is the intent of the City of Columbus, Traffic Maintenance Division, to obtain formal bids to establish a contract for the purchase and delivery of two (2) insulated aerial bucket 4x4 trucks with extended (super) cab and Chassis minimum G.V.W. rating of 19,500 pounds equipped with utility body. These trucks will be used by the Traffic Management Division Sign Department.

These completed trucks are required to be operated by a regular, non-CDL licensed driver.

1.2 Classification: The contract resulting from this bid proposal will provide for the purchase, installation, and delivery of two (2) insulated aerial bucket 4X4 trucks with extended (super cab) Cab and Chassis minimum G.V.W. rating of 19,500 pounds equipped with utility body. These completed trucks are required to be operated by a regular, non-CDL licensed driver. Bidders are required to show experience in providing these types of equipment and warranty service as detailed in these specifications.

1.2.1 Bidder Experience: The offeror must submit an outline of its experience and work history in these types of equipment and warranty service for the past five years.

1.2.2 Bidder References: The offeror shall have documented proven successful contracts from at least four customers that the offeror supports that are similar in scope, complexity, and cost to the requirements of this specification.

1.3 Specification Questions: Questions regarding this bid must be submitted on the Vendor

Services portal by 11:00 am Monday, October 5, 2026. Responses will be posted on the RFQ on Vendor Services no later than Thursday, October 8, 2026, at 11:00 am.

1.4 For additional information concerning this bid, including procedures on how to submit a proposal, you must go to the City of Columbus Vendor Services web site at https://columbusvendorservices.powerappsportals.com/ and view bid number RFQ033726.

2.0 APPLICABLE PUBLICATIONS AND STANDARDS

2.1 Must meet or exceed all City, State, Federal safety guidelines and standards.

2.2 All OSHA applicable guidelines and standards.

2.3 References to a particular trade or manufacturer's model number are made for descriptive purposes to guide the bidder in interpreting the requirements of the City. They should not be construed as excluding proposals on other types of materials, equipment and supplies.

3.0 REQUIREMENTS

3.1 General Information:

3.1.1 Term: The contract awarded as a result of this proposal is for a one-time purchase.

3.1.2 Pricing: Bidders are to bid firm or fixed prices, FOB Destination, Freight Prepaid and Allowed, Shipping/Handling/Off-loading included. Additional ordering/delivery/invoicing details are located in Section 5. All pricing must include manufacturer warranty. All manufacturer warranties will be passed on to the City of Columbus.

3.1.3 Quantity: Two (2) conventional 4X4 extended (super) cab truck chassis with a minimum G.V.W. rating of 19,500 pounds equipped with an articulating telescoping aerial lift. These completed trucks are required to be operated by a regular, non-CDL licensed driver.

3.1.4 Quality Standards: The City intends to purchase new, unused and the most current model. The specifications describe a minimum acceptable requirement which a bidder has to meet. However, the bidder is allowed to exceed a minimum requirement where the excess enhances the function of the unit and which the City can accept. It is not acceptable for a bidder to exceed a maximum desired limit.

3.2 Bidder Requirements: The City will use the requirements of this section to determine if each bidder meets the minimum standards to be considered a responsible bidder. Please print, complete and attach Reference pages and attach any supplemental pages as may be necessary to meet these requirements. For instructions on how to attach a document to your bid, please refer to the Vendor Services User Guide.

3.2.1 Experience Required: Documentation shall include (at a minimum) information meeting the following criteria.

3.2.1.1 Equipment and Warranty Capabilities: Offerors must document, and submit in a letter attached to the bid, their capability of providing the equipment and warranty service specified herein.

3.2.1.2 Manufacturer Relationship: The offeror shall provide the history of their relationship with manufacturer(s) that will potentially be providing these types of equipment/parts and warranty service for the past five years, including but not limited to the following:

a) Length of the relationship

b) Level of the relationship

c) A brief history of the relationship

3.2.2 References: The offeror shall have documented proven successful contracts from at least four customers that the offeror supports that are similar in scope, complexity, and cost to the requirements of this specification.

3.2.2.1 Contact Information Required: The reference contact information shall include the customer name, customer e-mail address, street address, telephone number, fax number, contact name and equipment purchase date.

3.2.2.2 Equipment / Warranty Service Information: A description of the equipment/parts provided and type of warranty service that was provided.

3.2.3 Subcontractor Information Required: If subcontractor(s) are to be used, please list names, addresses, telephone numbers and a contact person for each subcontractor. All subcontracts must have valid contract compliance certification.

3.2.3.1 Subcontractor Contact: Should the offeror use subcontractors, the City shall use the offeror as the primary contact point.

3.2.4 Specification Questions: Questions regarding this bid including any exceptions and/or suggested changes to the requirements must be submitted on the vendor services portal by 11:00 am (local time) on Monday, October 5, 2026. Responses and any necessary addenda will be posted as an amendment to this RFQ on the City’s Vendor Services portal no later than 11:00 a.m. (local time) on Thursday, October 8, 2026. The City strongly encourages bidders to submit exceptions and/or changes during this stage of the process. Bidders submitting exceptions and/or changes before this date will greatly reduce the likelihood of their bid being rejected as non- responsive to the specifications.

Bidders who have not registered and created a new user on the City's portal https://columbusvendorservices.powerappsportals.com/ are strongly encouraged to do so.

Notice of any pre-bid notes and addenda will only be sent to Bidders who have registered at the site.

3.2.4.1 For further instructions on how to submit "Vendor Questions" through the Vendor

Portal, please see Section "Add Vendor Questions" provided in the City of Columbus Vendor Services User Guide.

3.2.4.2 The City has instructional videos to assist bidders at the portal. Tutorial videos are available to be viewed through You Tube or by clicking the following link:

https://www.youtube.com/channel/UCTIkkGNM7GHIITzoqQVNJlA/videos?shelf_id

=0&view=0&sort=dd

SECTION

NUMBER

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3 Specification Information: The equipment shall be a new and unused gas powered aerial lift and utility body should be installed on Ford F550, 4X4 extended (super) cab, pick up style cab and chassis or City of Columbus approved equal. Bidders shall note compliance with the following specifications in the Describe Actual Product Bid column. Indicate make, model, year and description of equipment bid. Bidders shall submit a copy of dealers build sheets with bid.

3.3.1 Alternates

Bids will be considered on units complying with the specifications. All alternates must be detailed in an attached letter to bid and the Manufacturer and Model clearly identified. Explanations must fully state what is to be furnished. All alternates must exceed specifications. The City of Columbus reserves the right to determine whether any proposed alternates are within the specifications.

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3.2 Cab and Chassis

3.3.2.1 Shall have GVWR rating of 19,500

minimum.

3.3.2.2 Shall have 60” cab-to-axle, or as necessary

to fit the configuration of the equipment.

3.3.2.3 Shall have maximum stowed travel height.

150 inches. Suspension, powertrain and wheels/tires can be adjusted accordingly.

3.3.2.4 Shall have 7,500 lb. Minimum front axle

and springs.

3.3.2.5 Shall have 4x4 wheel drive.

3.3.2.6 Shall have power steering

3.3.2.7 Shall have front stabilizer bar.

3.3.2.8 Shall have 15,000 lb. minimum rear axle, 4.88:1 ratio (or as needed for best loaded acceleration and 75 MPH top speed).

Limited slip rear axle must be installed, no exceptions.

3.3.2.9 Shall have all-terrain radial tires, all around.

3.3.2.10 Shall have Ford TorqShift heavy duty 6

speed automatic transmission with a three plate two stage torque converter or equivalent.

3.3.2.11 Shall have auxiliary transmission cooler.

3.3.2.12 Shall have 7.3L 2V DEVCT NA FPI V8 Gas

Engine

3.3.2.13 Shall have minimum 335 HP @ 5500 rpm.

3.3.2.14 Shall have a minimum torque of 468 ft. lbs.

at 3900 RPM.

3.3.2.15 Shall have minimum of a 190-amp

alternator.

3.3.2.16 Shall have 40-gallon after axle rear fuel

tank.

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3.2.17

Shall have two (2) front tow hooks and two

(2) rear tow hooks for a total of four (4) tow hooks. The rear tow hooks will be placed in the prebuild meeting.

3.3.2.18 Shall have full cab length OEM running

boards on both sides

3.3.2.19 Shall have a tilt wheel.

3.3.2.20 Shall have trailer tow mirrors with convex

spot mirror with power/heated glass with integrated clearance lights and turn signal.

3.3.2.21 Shall have exterior back up alarm. OEM or

approved equal.

3.3.2.22 Shall have AM/FM radio.

3.3.2.23

Shall have 40/20/40 vinyl seat, with center fold down console that is an inside arm rest and have dual cup holders.

3.3.2.24 Shall have air conditioning.

3.3.2.25 Shall have gauge package with

tachometer.

3.3.2.26 Shall have cruise control.

3.3.2.27 Shall have Power windows and door locks.

3.3.2.28 Shall have height adjustable seat belts for

driver and front seat passenger.

3.3.2.29 Shall have an auxiliary power ports

(12Vdc) within easy reach of the driver.

3.3.2.30 Shall have all chassis manufactures factory

installed interior panels are to stay in place, none are to be removed or deleted.

3.3.2.31 Shall have all season Floor mats OEM.

3.3.2.32 Shall have Two (2) complete sets of all

keys shall be provided.

3.3.3 Paint and Rustproofing

3.3.3.1 Shall complete chassis and body unit to be

primed and painted a matching bright white. Frame painted black.

3.3.3.2 Care shall be taken during painting process

to mask ID plates, part numbers, etc. to preserve their readability.

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3.3.3 The body cargo area and tail shelf floors

shall be painted with a black abrasive, skid-resistant paint, “Manus Bond” or approved equal.

3.3.4 Truck Utility Body

3.3.4.1 Unless specified, the utility body shall be

fully constructed of A60 zinc alloy steel line utility body.

3.3.4.2 Overall length of utility body shall be

approximately 96 inches and a body width of 94 inches. The central cargo area shall be approximately 54 inches wide, or as necessary to accommodate the aerial lift when in the stowed position

3.3.4.3

Tail shelf extension shall be a minimum length of 14 inches; any changes must be discussed before the unit is ordered with the City of Columbus making the final decision. An 8-inch-high removable tailboard shall be installed the width of the cargo area ahead of stowed bucket. This is to be variable for boom fitment and overall ride height. Grab handles on right side to assist in entry and egress (left grab handle may be added in prebuild meeting, contingent on placement of cone holder (3.3.4.4).

3.3.4.4

A cone holder and a vise mount shall be installed on the rear of the truck.

Placement can be discussed during prebuild meeting.

3.3.4.5

All compartment doors shall be double panel steel or roll up style doors. Each compartment shall be lockable. All locks shall be keyed the same, and two (2) copies of the keys are to be supplied with the truck as specified in 3.3.2.32.

3.3.4.6 Non-roll-up style doors shall be painted to

match the truck.

3.3.4.7 Shall have drip edges above all

compartment doors. All doors shall be waterproof sealed with an automotive type rubber seal on all four sides.

3.3.4.8

Shall have spring loaded mechanical door holder on vertical doors. Shall have vinyl coated cable or chain stops on horizontal doors (unless roll up style doors).

3.3.4.9

Two (2) wheel chocks shall be mounted above the rear wheel well, one (1) on each side.

3.3.4.10

Shall have fender panels, tail shelf skirts, main body components, door hinges, wheel well liners, door latches and outer door panels to be constructed of painted steel to prevent corrosion.

3.3.4.11 Shall have grip strut on the top of each

compartment. Outer top of compartments to be covered with grip strut.

3.3.4.12

Shall have curbside front vertical compartment shall be a minimum of 60” tall and 24” wide and accommodate brackets for oxygen and acetylene tanks. Must be vented. Must have room for a 50’ set of oxy/acetylene hoses and regulators.

3.3.4.13 Shall have curbside middle horizontal

compartment. Adjustable shelf with removable dividers on 4-Inch Centers.

Discuss in prebuild meeting.

3.3.4.14 Curbside rear vertical. Shall have a

minimum of a 7-drawer slide out drawer system that can be opened one handed.

3.3.4.15 Street side front vertical compartment shall

have adjustable shelf with removable dividers on 4-Inch Centers. Discuss in prebuild meeting.

3.3.4.16 Shall have street side middle horizontal

compartment. Adjustable shelf with removable dividers on 4-Inch centers.

Discuss in prebuild meeting.

3.3.4.17 Shall have street side rear vertical

compartment. Shall have a minimum 7-drawer slide out drawer system that can be opened one handed.

3.3.4.18 Shall have 36'' L steel tail shelf, width to

match body

3.3.4.19 Shall have steel recessed Grip Strut side

access steps on curbside of tail shelf.

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3.4.20 Shall have headache rack covering the

entire rear window.

3.3.4.21 Cargo bay compartment shall have

material rails mounted in the interior of the cargo area, on the driver’s side. The exact placement to be determined at the pre-build meeting

3.3.5 Electrical

3.3.5.1 Shall have compartment lights wired to

dash mounted master switch.

3.3.5.2

Shall have lights and reflectors per FMVSS 108 (Complete LED).

3.3.5.3

Shall have full width cab mounted strobe on top of the cab to be visible from the front and sides, Amber.

3.3.5.4 Shall have 6-Position strobes, amber, LED, two (2) surface mounted lights in grille, two

(2) oval lights on body sides above wheel wells, two (2) round lights at rear, Class II.

3.3.5.5 Strobe lights shall be wired battery hot.

3.3.5.6

Strobes shall be wired to factory upfitter switches.

3.3.5.7

Shall have cargo light, LED, 4 DIA, grommet mounted (Tecniq #T41-WC0T-1).

Install on cargo side as high as possible of CS rear vertical. Wired with work lights switch in cab.

3.3.5.8 Shall have flood light, LED, with rubber

housing, 4.75 DIA (Truck-Lite #81260).

Installed in pintle area with switch in cab and at rear, also wired to come on in reverse.

3.3.5.9 Shall have remote spot light, LED, permanent mount, with wireless dash-mounted controls and programmable wireless remote (Go-Light #20074). Install on CS rear corner.

3.3.5.10 Shall have upfitter switches, Ford (supplied

with chassis).

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3.5.11 Shall have OEM Ford 2.0k W Pro Power

Inverter or 3000 Watt, Pure Sine Wave, 120 VAC (Sensata #12/3000N). Install in street side 1st vertical. Inverter wired ignition hot to switch mounted in chassis cab or OEM.

3.3.5.12 Shall have electrical receptacle, 12 Volt

(cigarette lighter style), weatherproof.

Install on front wall of SS horizontal. Wired ignition hot.

3.3.5.13

Shall have electrical receptacle, 120 Volt, GFCI, includes weather-resistant enclosure. One in cab. One in each vertical at front top corner excluding 1st vertical

SS.

3.3.5.14 Shall have PTO indicator light, installed in

cab.

3.3.5.15 Shall have Ford OEM back up camera or

approved equal.

3.3.6 AERIAL LIFT

3.3.6.1 Shall have Aerial lift to be Altec AT-40G

series insulated articulating, telescopic boom, or approved equal. Boom shall meet ANSI category C voltages up to 46 KV. or approved equivalent.

3.3.6.2 Shall have Aerial Lift to have a multi-

section boom. The entire length of the boom and the operating platform is to be contained within the length of the vehicle when stowed in the travel position.

3.3.6.3 The boom shall provide for a working

height of at least 45 feet.

3.3.6.4 The boom shall provide for a minimum

horizontal working extension of at least 29 feet from the centerline of the truck from side to side.

3.3.6.5 Boom rotation shall be 360 degrees

continuous and unrestricted. A shear ball bearing turntable and a gearbox containing a worm and spur gear drive system shall be used.

3.3.6.6

All cylinders shall be equipped with integral check valves or holding valves.

3.3.6.7

Shall have a shock absorbing boom cradle with storage support, located at the street side, rear of the cargo area, and have a 3-sided cushion without a tie down strap.

3.3.6.8

Shall have PTO or electric driven pump assembly, with interlock hydraulic pump system providing a minimum operational flow of three (3) gallons per minute.

3.3.6.9 The reservoir shall be internalized and

equipped with a sight gauge, shut-off valves and filters.

3.3.6.10 Shall have a minimum of a (7) gallon fluid

reservoir to supply operation for the entire boom. This reservoir is to be constructed of heavy gauge steel, or fully protected by a heavy gauge steel plate. This steel plate is not to impede, in any way, any sight gauges or filling of tank. All exposed hydraulic hoses are to be protected by a heavy gauge steel plate.

3.3.6.11 Shall have master controls for all boom and

bucket functions shall be located at the pedestal and be able to override all of the hydraulic controls located at the platform.

3.3.6.12

Externally adjustable wear pads shall be utilized for telescoping boom.

3.3.6.13 Shall have individual controls at the

platform for platform rotation, and platform leveling.

3.3.6.14

Shall have an emergency shut off valve at the platform.

3.3.6.15 The INSULATING UPPER CONTROL

SYSTEM shall include a single handle controller incorporating high electrical resistance components that is dielectrically tested to 40 kV AC with no more than 400 microampers of leakage. The control handle is green in color to differentiate it from other non-tested controllers.

3.3.6.16 Shall have insulated engine stop/start

system with switches at platform and lower controls.

3.3.6.17 There shall be one (1) safety harness

attachment point for the platform.

3.3.6.18

The platform shall have a dump system for clean out and rescue. This dump system is to be operable from inside the bucket and at the pedestal.

3.3.6.19 Shall have an insulated 12-volt emergency

power system with switches at both the platform and lower controls, this will allow full functionality of all controls. This is to be fully protected by a heavy gauge steel plate.

3.3.6.20 All controls for platform operation and

boom operation shall be available from inside of platform and at the pedestal while standing inside of the utility bed.

3.3.6.21 The platform shall be capable of supporting

400 pounds with torsion bars and/or counterweight if applicable. Must keep inside rear dual on ground.

3.3.6.22 Shall have Single 26 x 26 x 42 in (660 x

660 x 1067 mm) One (1) Man bucket with liner. Or approved equal. A bucket liner must be included with a step to exit the bucket.

3.3.6.23 The platform shall be end hung only.

3.3.6.24 The platform shall rotate 180 degrees

around the tip of the boom. These controls are to be insulated and operated from inside the bucket and at the pedestal.

3.3.6.25 The platform shall have a leveling system

that will keep the floor of the platform level with the ground. Controls for this leveling system are to be located at both the upper and lower control stations.

3.3.6.26 The height of the completed unit shall not

exceed 12 foot and 4 inches when the unit is in the travel position.

3.3.6.27 Shall have one (1) weatherproof cover for

the platform

3.3.6.28 The platform shall stow as low as possible.

There is to be a flexible rubber platform support located under the platform. There shall be a clear pathway to entering the bucket.

3.3.6.29

Shall have outriggers in addition to the torsion bars, these are to be at the sole discretion of the operator of whether or not to be used. No interlock system is to be installed. They will at no point extend outside of the footprint of the utility body (straight down outriggers are preferred).

These are not to intrude into, or take away from, the bin compartments installed in the utility bed.

3.4 Training

3.4.1 Manufacturer shall provide a training

program that covers the unit’s safe operational instruction procedures. The training program shall be for a minimum of

(1) one working day for the operators of the machine and minimum (1) one working day for Fleet Services personnel. Training will take place at locations determined by the City.

3.4.2 Manufacturer shall provide a training

program that covers the unit’s routine maintenance procedures. The training program shall be for a minimum of (1) one working day for the operators of the machine and minimum (1) one working day for Fleet Services personnel. Training will take place at locations determined by the City.

3.5 MEETING

3.5.1 Pre-Build Meeting: There shall be a

mandatory pre-build meeting to be held no less than two weeks prior to the fitting of the boom and utility body to the cab and chassis. The meeting will be held at location:

1820 E. 17th Ave., Columbus, Ohio 43219.

Virtual participation is permitted.

4.0 SAMPLING, INSPECTION AND TEST PROCEDURES

4.1 Demonstration: The City reserves the right to require a demonstration of any equipment prior to award of the bid. Such demonstration shall be conducted, at the sole discretion of the City, either on roads in the City of Columbus, or in another municipal setting in Franklin County, Ohio where such equipment is in daily operation. All costs associated with such demonstration are to be the responsibility of the supplier. All demonstrations shall be concluded within five (5) working days after notification of demo request. Failure to comply may be used as a basis for rejection of the bid.

4.2 Inspection: All parts shall be thoroughly, physically inspected upon delivery by an authorized representative of the Division Infrastructure Management for verification of conformance to the specifications. Any damaged, defective, or substandard item shall be promptly removed by the supplier, and replaced at no cost to the City of Columbus. The supplier will be responsible for all shipping costs.

4.3 Testing: The City reserves the right to conduct testing on supplies provided by the ensuing contract before acceptance for specification compliance at any time during the duration of the contract. Any product not meeting the above-described specifications shall be rejected and returned to the bidder.

5.0 ORDERING, DELIVERY and INVOICING

5.1 Ordering Procedure: A written purchase order will be established by the Director of Finance and

Management. The Purchase Order will have the delivery information and invoice information.

5.2 Delivery days after Order: Bidder shall insert in the "Discount" tab of the bid the Lead Time expressed as the number of calendar days after receipt of order that delivery will be made.

Vendors shall state actual delivery time in calendar days in the space provided under Delivery/Payment Terms. Delivery time may be a factor in determining award of bid. Failure to deliver in the days proposed may lead the City to consider the contract holder in partial or full breach of the contract. In the case of such breach, the City reserves the right to pursue all remedies and actions available under this contract and relevant law.

5.2.1 The successful bidder(s) assume the responsibility for the body-chassis coordination including, but not limited to, transportation and insurance for complete unit(s) while in transport and until final acceptance by the City of Columbus.

5.2.2 All equipment must be delivered with all fluid levels at the manufacturer’s recommended full capacity. All manufacturer’s pre-delivery service and inspections should be completed prior to delivery to the City of Columbus. Written certification of the complete equipment’s actual tare weight shall be included when the vehicle is delivered.

5.2.3 All equipment will be delivered to the designated location and off-loaded by the bidder.

The bidder will assume all responsibility for transportation, off-loading, and any or all return costs for equipment deemed unacceptable by the City pursuant to this agreement.

5.2.4 Delivery Location: The equipment will be delivered FOB Destination Freight Prepaid and

Allowed (Seller Bears All Freight and Delivery Costs) to:

Division of Fleet Management 4211 Groves Road

Columbus, OH 43232

5.2.5 Delivery Scheduling and Hours: The City of Columbus requires no less than twenty-four

(24) hours advance notice before the actual delivery by notifying Deryl Seward (or designee) at the Division of Fleet Management at (614) 645-6205. Delivery can be made Monday through Friday 7:00 AM – 2:30 PM (local time), except on a City of Columbus recognized holiday. City of Columbus personnel will uncrate any carton packaging. The contact information and delivery location will be included on the Purchase Order.

5.3 Title:

5.3.1 All documents required to obtain a State of Ohio Title must be delivered to Jason Smith at the Division of Fleet Management, 4211 Groves Road, Columbus, Ohio 43232. All forms must be properly completed. NO BLANK FORMS WILL BE ACCEPTED.

5.3.2 After signature by the Division of Fleet Management, an Ohio Certificate of Title shall be delivered to the City of Columbus, Division of Fleet Management within three (3) days.

Fleet Management will not authorize payment for any vehicle until they receive a valid State of Ohio Title.

5.3.3 All titles are to be made out to City of Columbus, 4211 Groves Rd, Columbus, Ohio

43232.

5.4 Packaging: All items must be packaged in the minimum standard packing material designed to protect against damage during shipment. Note the use of Environmentally Friendly materials is encouraged.

5.5 Invoicing: Each invoice shall show the City Purchase Order number, a brief description identifying the item, the unit price, and the total amount. The invoice amount must exactly match the purchase order amount in accordance with the bid proposal. All Invoices should be mailed to the following address to ensure proper payment:

City of Columbus

111 N. Front Street, Fourth Floor Columbus, OH 43215

ATTN: Catherine Emhuff/Jessica Yu PublicServiceInvoices@columbus.gov

6.0 NOTES

6.1 Online Bidding Instructions: Bidders are requested to quote firm or fixed prices on the corresponding line item(s) only. Within the "Comment" section of each line bidders are requested to provide the make, model and manufactured year of the unit quoted. It is understood that all parts that may not be specifically mentioned must be included to make the unit operational and complete.

6.1.1 Alternates: Bids will be considered on units complying with the specifications.