B1 - PD MOARNG Unit Wall Lockers .pdf

Purchase Description – W912NS21Q8014 Wall Lockers with Delivery and Installation - MOARNG

CLIN 0001) 24X24X72 WALL LOCKERS 29 EA

Delivery Location and Installation Location: 1315 WEBSTER STREET, WEST

PLAINS, MO 65775

CLIN 0002) 24X24X72 WALL LOCKERS 208 EA

Delivery and Installation Location: 1616 S. MISSOURI STREET, MACON, MO 63552

CLIN 0003) 24X24X72 WALL LOCKERS 72 EA

Delivery and Installation Location: 301 E. MCKINSEY STREET, MOBERLY, MO 65270

CLIN 0004) 24X24X72 WALL LOCKERS 219 EA

Delivery and Installation Location: 2626 INDEPENDENCE STREET, CAPE

GIRARDEAU, MO 63703

CLIN 0005) 24X24X72 WALL LOCKERS 148 EA

Delivery and Installation Location: 1210 MORRIS STREET, FARMINGTON, MO 63640

CLIN 0006) 24X24X72 WALL LOCKERS 155 EA

Delivery and Installation Location: 2740 HIGHWAY P, FESTUS, MO 63028

CLIN 0007) 24X24X72 WALL LOCKERS 222 EA

Delivery and Installation Location: 600 S. PINE, PIERCE CITY, MO 65723

CLIN 0008) 24X24X72 WALL LOCKERS 164 EA

Delivery and Installation Location: 1800 RICHARD WEBSTER DRIVE, CARTHAGE, MO 64836

NOTE: Salient characteristics applicable to CLINS 1 through 8

1. Locker will be approximately: 24” wide x 24” deep x 72” tall (approximate to be considered as a variable of 1” for deep, wide, and tall).

2. Standard stock color to be GRAY OR TAN.

3. 16 gauge or greater perforated steel body construction, 14 gauge or greater perforated steel door construction.

4. Hinge will be continuous piano hinge or equivalent reliability/function/strength.

Hinge (right/left) pattern shall all be the same per room.

5. Handle will be stainless steel or equivalent strength/rustproof (recessed) with three point latch

6. All lockers are to have perforated doors to provide for easy viewing of contents. The sides and back do not have to be perforated.

7. All locker are to have one “hat” shelf

8. All lockers will have one hangar bar below the shelf

9. All lockers are to have interior hooks below the hangar bar.

10. Lockers must be bolted together in groups of three or more to prevent movement.

CLIN 0009) 18X24X84 WALL LOCKERS 186 EA

Delivery and Installation Location: 7201 Militia Drive, Jefferson City, MO 65101

CLIN 0010) 18X24X84 WALL LOCKERS 517 EA

Delivery and Installation Location: 1400 North Fremont Avenue, Springfield, MO 65802

NOTE: Below Salient characteristics applicable for CLINS 9 and 10.

1. Lockers will be approximately: 18” wide x 24” deep x 84” tall (approximate to be considered as a variable of 1” for deep, wide, and tall).

2. Standard stock color to be GRAY OR TAN

3. 16 gauge or greater perforated steel body construction, 14 gauge or greater perforated steel door construction

4. Hinge will be continuous piano hinge or equivalent reliability/function/strength.

Hinge (right/left) pattern shall all be the same per room.

5. Handle will be stainless steel or equivalent strength/rustproof (recessed) with three point latch

6. All lockers are to have perforated doors to provide for easy viewing of contents

7. All locker are to have one “hat” shelf

8. All lockers will have one hangar bar below the shelf

9. All lockers are to have interior hooks below the hangar bar.

10. Lockers must be bolted together in groups of three or more to prevent movement.

Installation Service and Shipping Information

1. Complete installation services provided by contractor, to include making lockers immovable. (Immovable is defined as bolting lockers together) Armories WILL NOT allow bolts to be drilled in the walls or flooring.

2. All installation to take place during normal business hours (7:00 a.m. to 5:00 p.m. Tuesday-Friday).

3. All existing lockers will be moved by the Missouri National Guard. Rooms will be cleared before shipment arrival.

4. Most armory locations will not have a dock to unload materials from a semi-truck, please plan accordingly when arranging shipping. Transportation of the lockers to the individual armories for installation will be the responsibility of the contractor.

5. Units will not be providing any pallet jacks or forklifts for the movement of materials once trunk has arrived with the lockers. Furthermore, some armories have the locker rooms that are on different levels of the building.

6. Coordination for getting the contracted installers into the building will be disclosed with the awardee and a unit POC will be assigned. No keys will be given out to the contractors. Installers must have a State/Government Issued photo ID in order to be given access to the building.

7. Installer will be responsible for removal of all trash and waste materials created by the delivery and installation of the lockers.

8. Staging area to pre-assemble lockers prior to being moved into locker rooms may or may not be available depending upon mission needs of the unit. Please plan on it not being available when submitting quotes.

AT/OPSEC Information to Bidders:

Pre-screen candidates using E- Verify Program. "The Contractor must pre-screen Candidates using the E- Verify Program (http:// www.dhs.gov/E-Verify) website to meet the established employment eligibility requirements. The vendor must ensure that the candidate has two valid forms of Government issued identification prior to entering the correct information into the E-Verify system. An initial list of verified/ eligible candidates must be provided to the COR no later than 3 business days after the initial contract award."*When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, with the designated Government representative. This Form will be provided to the Contracting Officer and shall become part of the official contract file.

Warranty: All products shall include the standard commercial warranty.

OVERALL TOTALS:

CLIN 0001 – 0008 1,217 EA 24X24X72

CLIN 0009 – 0010 703 EA 18X24X84

http://www.dhs.gov/E-Verify)