B08 Q A 5-21-2020.docx

13 KB Posted

Attached to
Expansion Joints
Solicitation number
W90WL520Q0018-1
Issued by

View the file

Other files

File Type Posted
A02 Kilm Expansion Joint.pdf PDF
A02 After burner Expansion Joint.pdf PDF
B08 Expansion Joint Revised RFQ 5-21-2020.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Expansion Joint Q&A Clarification

1. The drawing shows 18" overall length and the body of the RFQ shows 21-1/2" overall length. Which would you prefer?

Government Response: This was an error in the SOW. The acceptable dimension for overall length shall be 18”.

2. Do you know or can you find out the operating and maximum pressure you see for each of these?

Government Response: There are no set parameters, it depends on the vendor’s proven design.

3. Do you know or can you find out the amount of thermal movement you need to handle for each - axial (compression/extension) and/or lateral (side to side)?

Government Response: There are no set parameters, it depends on the vendor’s proven design.

4. Design Pressure: _____

Axial Compression: _____

Axial Extension (If any): _____

Lateral Deflection (If any): _____

Angular Rotation (If any): _____

Government Response: There are no set parameters, it depends on the vendor’s proven design.

File details come from the government source that posted it. Updated .