B08_ATCH_1_SALIENTS_S23021A.pdf

Salient Characteristics S23021A

PORTABLE WATER SAMPLERS AND ACCESSORIES

SALIENT CHARACTERISTICS:

3 EA, Water Sampler:

1. Sampler shall consist of a pump, controller, top cover, center section, base, distributor arm and two pump tubes. Does not include bottle configuration kit.

2. Shall be made of corrosion resistant, impact resistant, UV resistant materials.

3. Shall be capable of being powered from external 120 VAC, 60 Hz or 12VDC power sources.

4. Shall be compatible with polypropylene 2-liter bottles and capable of holding 8 bottles for sample collection.

5. Enclosure shall have a 4X, 6 (IP67) enclosure rating, at a minimum.

6. Shall be capable of interfacing with a cell phone modem.

7. Shall be portable and include handles for transporting.

8. Shall include all necessary parts, cables, manual, etc., and applicable software for system operation.

Pump:

9. Shall have a lifting capability of at least 25 feet.

10. Shall include a non-contact type liquid detector device that detects when liquid sample reaches the pump to automatically compensate for changes in head heights.

11. Shall support intake suction tubing up to 99 feet (1 to 30 m) long and be made of vinyl with inside dimension 3/8 inch (1 cm).

12. Shall be repeatable within ±5 ml or ±5% of the average volume in a set, or better.

13. Shall have a sample delivery velocity of at least 2.5 ft./sec. at heads up to 15 ft.

14. Shall have a pump tubing life of at least 1,000,000 pump counts.

Controller:

15. Shall include a user interface control panel with backlit display and programming keys.

16. Shall have non-volatile ROM memory.

17. Shall have operational temperature range from 32° to at least 120°F (0° to 49°C).

18. Shall allow for programmable composite samples from 1 to at least 500 samples.

19. Shall be SDI-12 compatible.

Operations:

20. Shall have storage capability for at least five (5) sampling programs.

21. Shall have sample frequency of 1 minute to at least 99 hours and 59 minutes, in at least 1-minute increments.

22. Shall allow for automatic rinsing of suction line up to at least three (3) rinses for each sample collection.

23. Shall be capable of running diagnostics test for RAM, ROM, pump, display, and the distributor.

24. Shall sample programmable sample volumes from 10 to at least 9,990 ml in 1 ml increments.

3 EA, Suction Line:

25. Shall be compatible with the sampler described above.

26. Shall consist of 25 ft. of 3/8-inch ID tubing and made of PTFE (PolyTetraFluoroEthylene) plastic with polyethylene jacket.

3 EA, Tubing Coupler:

27. Shall be compatible with the suction line described above.

28. Shall consist of a 3/8-inch tubing coupler made of stainless-steel.

3 EA, Power Cable:

29. Shall be compatible with the sampler described above.

30. Shall consist of a power cable for connecting external 12VDC to the sampler.

31. Shall be at least 6 ft. in length and include heavy-duty battery clips.

3 EA, Strainer:

32. Shall be compatible with the suction line described above.

33. Shall consist of a 3/8-inch stainless-steel strainer for low-flow applications.

3 EA, Cell Phone Modem:

34. Shall be compatible with the sampler described above.

35. Shall consist of a cell phone modem with magnetic mount antenna for wireless digital communications.

36. Shall allow for remote control of sampler functions using a terminal program.

37. Shall be capable of transmitting text message alarms or email alerts.

38. Shall be compatible with frequency bands B2, B4, B5, B13, B66 at a minimum.

39. Shall be powered by sampler’s power source.

40. Customer is responsible for providing SIM card.

3 EA, Solar Panel Kit:

41. Shall consist of a solar panel, mounting bracket, charge controller, cable, and battery.

42. Solar panel shall have maximum power (Pmax) of 30 watts minimum. Shall include a 2-conductor, 16-

18 AWG stranded wire cable of at least 15 ft. Cable shall be connected in a sealed junction box.

43. Bracket and hardware shall be made of corrosion-resistant materials. Shall be adjustable for azimuth (0-

360 degrees) and elevation (0-90 degrees) minimum pointing angles. Shall be capable of being mounted on a 2-inch pipe.

44. Shall include a compatible solar charge controller. Controller shall be compatible with the solar panel and battery described herein and include electronic protections including overload, short-circuit, high voltage, reverse polarity, high temperature, lightning, and surges.

45. Shall include a compatible 36 Ah battery.

3 EA, Sampling Bottles Configuration:

46. Shall be compatible with the sampler described above.

47. Shall include bottle base insert, retaining ring, and two (2) discharge tubes.

48. Shall include eight (8), 2-L polyethylene bottles, with caps.

3 EA, Insert:

49. Shall be compatible with the sampler described above.

50. Shall consist of a bottle base insert for eight (8) bottle (2-L) sampling configuration.

3 EA, Retaining Ring:

51. Shall be compatible with the sampler described above.

52. Shall consist of a retaining ring for eight (8) bottle (2-L) sampling configuration.

3 EA, Bottles:

53. Shall be compatible with the sampler described above.

54. Shall consist of eight (8), 2-L polyethylene bottles, with caps.

1 EA, USB Cable:

55. Shall be compatible with the sampler described above.

56. Shall consist of a USB communication interface for connecting the sampler to a computer.

57. Shall be at least 10 ft. in length.