B08_ATCH_1_SALIENTS.pdf
PDF 421 KB Posted
- Attached to
- Horizontal Pivot Band Saw IAW Salients
- Solicitation number
- 140G0125Q0137
About this file
The document is a Salient Characteristics specification for a Horizontal Pivot Band Saw, detailing precise technical requirements for a single unit. The saw must be an automatic, horizontal, pivot-style band saw with specific capabilities including a 12" wide cutting capacity, 3-phase 208/220V power, built-in coolant system, LED control console, pneumatically operated clamping vices, and multiple safety features. Key technical specifications include a blade drive motor not exceeding 3hp, work height limited to 32" from the floor, machine width and fully raised height restrictions, and the ability to operate in semi- or fully automatic modes. The saw must include features like carbide blade guides, variable blade speed, a powered chip-removing brush, parts counter, adjustable feed rate, and auto shut-off safety mechanisms. A small parts kit for initial setup is also required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140G0125Q0137.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics H25001
Horizontal Pivot Band Saw
Salient Characteristics
1 ea. Horizontal Pivot Band Saw
1. Shall consist of an automatic, horizontal, pivot-style (scissor-type) band saw.
2. Shall have a saw capacity of at least 12 and a bar feed up to
3. Shall include a top mounted (on top of saw) control console with LED display.
4. Shall conform to 208/220, 3-phase voltage requirements.
5. Shall include a built-in coolant system with wash-down hose.
6. Shall include carbide blade guides and push-button variable blade speed functionality.
7. Shall include a solid exit support/discharge table
8. Shall include a powered brush for removing chips from blade gullets.
9. Arm lift shall be capable of being operated from the console.
10. Shall be capable of operating in semi- or fully automatic modes.
11. Shall include a parts selector and counter feature.
12. Shall include an adjustable vise and hold down fixtures.
13. Shall have adjustable feed rate and clamping force, cutting pressure features.
14. Shall include manual guide arm adjustment feature.
15. Shall include auto shut-off safety features if blade breaks, or when feed system is out of stock.
16. Shall be equipped with blade guards and awareness barriers for safety purposes.
17. Work height shall not exceed 32 measuring from floor.
18. Blade drive motor shall not exceed 3hp.
19. Machine width shall not .
20. Machine fully raised height shall not exceed 97 .
21. Vice shuttle length shall per single stroke.
22. Clamping vices and shuttle shall be operated pneumatically.
23. Shall include a small parts kit including all items (such as fittings, fuses, etc.) necessary for saw start-up.
File details come from the government source that posted it. Updated .