B08_ATCH_1_HIGH_SEC_PADLOCK_SALIENTS.pdf
PDF 80 KB Posted
- Attached to
- High Security and Weather Padlocks IAW Salients
- Solicitation number
- 140G0125Q0062
About this file
This is a salient characteristics document specifying requirements for high security padlocks needed by the USGS Hydrologic Instrumentation Facility (HIF) in Tuscaloosa, AL. The padlocks will be used by USGS Water Mission Area field offices to secure government equipment and shelters in harsh outdoor environments at remote locations.
The technical requirements specify a 2-inch reinforced laminated steel body with a hardened steel shackle measuring 3/8 inch in diameter, with 1-inch vertical and 15/16 inch horizontal clearance. The lock mechanism must be non-rekeyable with a 4-pin W1 cylinder, dual locking levers for pry resistance, and capability to remove the key while unlocked. The locks must be keyed to USGS standard key Master Lock number 2640 and include 2 keys per lock. The solicitation (140G0125Q0062) is a total small business set-aside under NAICS 332510, with quotes due March 6, 2025 at 11:00 AM EST and anticipated award date of March 31, 2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B08_ATCH_2_WEATHER_PADLOCKS_SALIENTS.pdf | ||
| Sol_140G0125Q0062.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
PADLOCK, HIGH SECURITY
The USGS Hydrologic Instrumentation Facility (HIF) at Tuscaloosa, AL needs to purchase high security padlocks.
These padlocks will be used by USGS Water Mission Area field offices in harsh outside environments to secure government owned equipment and shelters at remote locations.
BODY MUST:
Be a 2 inch (50mm) reinforced laminated steel.
SHACKLE MUST:
Be hardened steel.
Be a minimum diameter of 3/8 inch (10mm).
Be a minimum of 1 inch (25mm) vertical clearance.
Be a minimum of 15/16 inch (24mm) horizontal clearance.
LOCK MECHANISM MUST:
Be non-rekeyable.
Be a 4-pin W1 cylinder.
Be dual locking levers to resist prying.
Be capable of removing key in the unlocked position.
Be capable of being keyed to USGS standard key, Master Lock number 2640.
KEY MUST:
Be keyed to USGS standard key, Master Lock number 2640.
Include 2 keys with each lock.
File details come from the government source that posted it. Updated .