B06_ATCH_1_SALIENTS_S23016.pdf

Salient Characteristics S23016

GNSS RECEIVERS AND ACCESSORIES

36 EA, GNSS Receiver:

1. Shall consist of a GNSS (Global Navigation Satellite System) for surveying and mapping applications.

2. Shall be capable, at a minimum, of tracking the following satellite navigation systems: GPS, GLONASS, GALILEO, BeiDou, QZSS, and SBAS.

3. Shall be capable of operating form an internal Li-Ion battery for at least 24 hours on a single charge.

4. Shall be capable of interfacing with external correction services for real-time DGPS mapping and navigation applications.

5. Shall have an Ingress Protection (IP) rating of IP67 or better for the enclosure.

6. Shall have stand-alone (autonomous accuracy) of less than 2 m.

7. Shall have a 12 VDC (nominal) external power input port.

8. Shall have built-in USB to RS232 converter.

9. Shall have differential GPS accuracy less than 0.25 m.

10. Shall have RTK horizontal accuracy at 0.01 m + 1 ppm and RTK vertical accuracy at 0.15 m + 1 ppm, or better.

11. Shall have a battery life status light indicator.

12. Shall include Wi-Fi and Bluetooth communications with status light indicators.

13. Shall have the option to perform FTP file pushes of data it stores internally to an off-site server.

14. Shall have operating temperature range from at least -40° C to +60° C.

15. Shall include an integrated inclinometer and compass.

16. Shall include features or techniques to reduce multipath errors.

17. Shall have National Marine Electronics Association 0183 v. 2.x and 3.0, and Binary EXchange format output.

18. Shall have JPS, Radio Technical Commission for Maritime Services SC104 v. 2.x and 3.x, Compact

Measurement Record input/output real time data.

19. Shall have internal memory with at least 2 GB of data storage.

20. Shall have internal GNSS antenna with NGS calibration for post processing.

21. Shall weigh no more 1.5 lbs.

22. Shall include a ¼” x 20 thread connector for attaching an adapter or mounting to a pole.

36 EA, GNSS Features:

23. Shall be capable of tracking the GPS satellite constellation L1 and L2 band signals.

24. Shall have an update rate at 1 Hz or faster.

25. Shall have auto power on capability based on application of external power.

36 EA, Power Cable:

26. Shall consist of a power cable with Faston Receptacles, or equivalent, to SAE and be at least 1.5 meters long.

36 EA, Top Plate Adapter:

27. Shall consist of a top plate adapter compatible with the receiver described above.

28. Shall have ¼-20 and 5/8-11 threads.

29. Shall be made of Stainless Steel, 304.

36 EA, Snow Cone Kit:

Salient Characteristics S23016

30. Shall consist of a cone shaped enclosure for the GNSS Receiver above that will encapsulate the receiver or utilize an external antenna with no hardware modifications.

31. Shall include snow cone, base plate, and all fasteners for assembly.

36 EA, Accessory Kit:

32. Shall include all applicable power adapters/cables and extension power cables.

33. Shall include an external power supply/charger.

34. Shall include USB A/micro-B cable that is at least 1 meter long.