B.08.02 Solicitation (W912EF21Q0023)`.pdf

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

W912EF21Q0023 06-Apr-2021 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

SEE SCHEDULE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

USAED, WALLA WALLA - CONTRACTING DIV.

ANDREW J SPRYS

201 N. THIRD AVENUE

WALLA WALLA WA 99362-1876

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

06-May-2021(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

509.527.7232ANDREW J SPRYS

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

W912EF21Q0023

Section A - Solicitation/Contract Form

CLAUSES INCORPORATED BY REFERENCE

52.203-18 Prohibition on Contracting With Entities That Require Certain

Internal Confidentiality Agreements or Statements-- Representation

JAN 2017

CLAUSES INCORPORATED BY FULL TEXT

52.223-22 PUBLIC DISCLOSURE OF GREENHOUSE GAS EMISSIONS AND REDUCTION GOALS--

REPRESENTATION (DEC 2016)

(a) This representation shall be completed if the Offeror received $7.5 million or more in Federal contract awards in the prior Federal fiscal year. The representation is optional if the Offeror received less than $7.5 million in Federal contract awards in the prior Federal fiscal year.

(b) Representation. [Offeror is to check applicable blocks in paragraphs (b)(1) and (2).]

(1) The Offeror (itself or through its immediate owner or highest-level owner) [ ___ ] does, [ ___ ] does not publicly disclose greenhouse gas emissions, i.e., make available on a publicly accessible Web site the results of a greenhouse gas inventory, performed in accordance with an accounting standard with publicly available and consistently applied criteria, such as the Greenhouse Gas Protocol Corporate Standard.

(2) The Offeror (itself or through its immediate owner or highest-level owner) [ ___ ] does, [ ___ ] does not publicly disclose a quantitative greenhouse gas emissions reduction goal, i.e., make available on a publicly available Web site a target to reduce absolute emissions or emissions intensity by a specific quantity or percentage.

(3) A publicly accessible Web site includes the Offeror's own Web site or a recognized, third-party greenhouse gas emissions reporting program.

(c) If the Offeror checked ``does'' in paragraphs (b)(1) or (b)(2) of this provision, respectively, the Offeror shall provide the publicly accessible Web site(s) where greenhouse gas emissions and/or reduction goals are reported:

(End of provision)

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each Fabricate And Deliver -

FFP

- One Set of Components For Wicket Gate Lock

- This includes delivery to Little Goose Dam FOB: Destination

PSC CD: 5660

NET AMT

0002 1 Each Fabricate And Deliver -

FFP

- One Set of Components For Wicket Gate Lock

- This includes delivery to Little Goose Dam

0003 1 Each Fabricate And Deliver -

FFP

- One Set of Components For Wicket Gate Lock

- This includes delivery to Little Goose Dam

0004 1 Each Fabricate And Deliver -

FFP

- One Set of Spare Components For Wicket Gate Lock

- This includes delivery to Little Goose Dam

0005 1 Each Fabricate And Deliver -

FFP

- One Set of Components For Wicket Gate Lock

- This includes delivery to Lower Granite Dam

0006 1 Each Fabricate And Deliver -

FFP

- One Set of Components For Wicket Gate Lock

- This includes delivery to Lower Granite Dam

0007 1 Each Fabricate And Deliver -

FFP

- One Set of Components For Wicket Gate Lock

- This includes delivery to Lower Granite Dam

0008 1 Each Fabricate And Deliver -

FFP

- One Set of Spare Components For Wicket Gate Lock

- This includes delivery to Lower Granite Dam

Section C - Descriptions and Specifications

SCOPE OF WORK

SCOPE OF WORK FOR

THE SUPPLY OF SIX WICKET GATE LOCKS,

DELIVERED TO LITTLE GOOSE AND LOWER GRANITE DAM, WASHINGTON

1. GENERAL INFORMATION

1.1. Description of services and introduction: The Contractor shall provide all materials, tools, equipment, and labor necessary to fabricate and deliver a total of six (6) complete wicket gate lock sets and two (2) spare sets as defined in this Scope of Work. The Contractor shall perform all fabrication to industry standards.

The Contractor shall perform a site visit to verify all field measurements prior to fabrication. Field measurements are indicated as such on the contract drawings.

1.2. Background: Generator Units 4-6 at Little Goose and Lower Granite powerhouses were originally equipped with automatic wicket gate locks. The original design consists of a horizontally installed wedge actuated by a hydraulic cylinder. Throughout the years, the locks have been either modified or partially removed on some of the units in both project locations. The modifications to the mechanism have caused it to not function as originally intended in addition to making its operation inconsistent from unit to unit.

The original wedge type locks have been removed on some units as this style lock could be overpowered by the force of the servos.

1.3. Objectives: Manufacture and deliver six (6) complete and two (2) spare sets of components for new wicket gate locks for Units 4-6 at both Little Goose and Lower Granite dams. Three complete lock assembly sets and one spare set are required per project location. Installation will be performed by others.

1.4. Scope: New lock mechanism consists of a horizontal lock that slides a block in place to prevent movement of the servo. The lock will be operated by a spring-extend hydraulic cylinder such that the lock is held open by governor pressure and extends to the locked position upon loss of pressure. The lock will utilize a spring to extend the cylinder. The spring will be located within the hydraulic cylinder and will be an off the shelf unit for ease of installation and maintenance. The existing stop plate will be used to hold the servo in place, once in place, the lock will have the ability to be locked out to stop the block from being retracted until the clearance is lifted utilizing an isolation valve on the hydraulic oil. The new lock will be installed on existing components utilizing existing pin and screw holes. Each lock shall have two limits switches providing feedback when the lock is fully engaged and fully open. Refer to reference drawing R- 002, items 171 and 181 for more detail. All dimensions based on existing components must be field verified as indicated on contract drawings.

2. SUBMITTALS

2.1. Submit the following for Government review and approval. Submit in accordance with the following.

2.1.1. Material Disposition Record – Submit three copies of all purchase and mill orders, shop orders for materials and work orders, including all new orders placed by Contractors and old orders extended for each supplier. Furnish, at the time of submittal of shop drawings, a list designating the material to be used for each item.

2.1.2. Shop Drawings – Submit per paragraph 3.14

2.1.3. Hydraulic Cylinder Data – Submit all documentation on hydraulic cylinder selection including, but not limited to, operating pressure, stroke length, bore, spring force, mounting style, rod end thread, construction material, port size, port type, port positioning, and seal material.

2.1.4. Manufacturer Test Reports – Submit documentation on testing performed on the lock assembly.

2.1.5. Paint Manufacturer’s Product Data Sheet

2.1.6. Qualified Paint Applicator

3. PERFORMANCE SPECIFICATIONS

3.1. The Contractor shall furnish all components for a total of six wicket gate lock sets in addition to two spare sets as per contract drawings and as detailed in this document unless otherwise indicated. These shall include but not be limited to the following:

3.1.1. Gate lock fabricated components.

3.1.2. Bolts and screws for all applicable connections.

3.1.3. Existing stop plate filler metal and 1in thick stop plate.

3.1.4. Hydraulic cylinders for each lock assembly.

3.1.5. Gate lock solenoid valve with manual override.

3.1.6. ½ in adjustable hydraulic oil flow control valve.

3.1.7. ½ in lockable manual ball valve.

3.1.8. ½ in automatic three-way valve.

3.1.9. Limit switches.

3.1.10. Control switches.

Bill of Materials – Wicket Gate Lock Sets

Item No.

Description Little Goose

Lower Granite

U4 U5 U6 Spare U4 U5 U6 Spare 1 Hydraulic Cylinder 2 2 2 2 2 2 2 2 2 Control Switch 0 0 0 1 1 1 1 0 3 Limit Switch 2 2 2 2 2 2 2 2 4 Limit Switch Bracket 1 1 1 0 1 1 1 0 5 Solenoid Valve 0 0 0 1 1 1 1 0 6 ½” Automatic Three-Way Valve 1 1 1 3 1 1 1 3 7 ½” Check Valve 1 1 1 3 1 1 1 3 8 ½” Lockable Ball Valve 1 1 1 3 1 1 1 3 9 ½” Flow Control Valve 1 1 1 3 1 1 1 3 10 Junction Box 1 1 1 0 1 1 1 0 11 Terminal Block 8 8 8 2 8 8 8 2 12 Din Rail 1 FT 1 FT 1 FT 0 1 FT 1 FT 1 FT 0 13 Mounting Bracket 1 1 1 0 1 1 1 0

Stop Block Bracket Top (1 Left, 1 Right)

2 2 2 0 2 2 2 0

Stop Block Bracket Bottom (1 Left, 1 Right)

2 2 2 0 2 2 2 0

16 Stop Block 2 2 2 0 2 2 2 0 17 Stiffener Bar 2 2 2 0 2 2 2 0 18 Plunger Rod 1 1 1 0 1 1 1 0 19 Plunger Rod Lever 1 1 1 0 1 1 1 0

1 ½”, 1/2-13 UNC-2B Grade 5 Hex Head Screw

8 8 8 0 8 8 8 0

4 ¼”, 1-8 UNC-2B Grade 8 Hex Head Screw, Partially threaded 2 1/4in thread length

18 18 18 0 18 18 18 0

4 ¾”, 1-8 UNC-2B Grade 8 Hex Head Screw, Partially threaded 2 ¼” thread length

12 12 12 0 12 12 12 0

4 ¾”, 1 1/4-7 UNC-2B Grade 8 Hex Head Screw, Partially threaded 2 ¾” thread length

10 10 10 0 10 10 10 0

5”, 1 1/2-6 UNC-2B Grade 8 Hex Head Screw, Partially threaded 3 ½” thread length

8 8 8 0 8 8 8 0

8”, 1 1/2-6 UNC-2B Grade 8 Hex Head Screw, Partially threaded 3 ½” thread length

6 6 6 0 6 6 6 0

26 1/4”, 1/4-28 UNF-2B Set Screw 2 2 2 3 2 2 2 3 27 1/8” x 6” x 6” AISI 4340 Shims 4 4 4 6 4 4 4 6 28 1/8” x 6” x 6” UHMW Wear Strips 2 2 2 6 2 2 2 6 29 1/4” x 6” x 6” UHMW Wear Strips 2 2 2 6 2 2 2 6 30 Stop Plate Filler Wedge 2 2 2 0 0 0 0 0 31 1in Stop Plate 0 0 0 0 1 1 1 0

3.2. GATE LOCK FABRICATED COMPONENTS

This section provides additional detail for the requirements for the machined components of the gate lock.

3.2.1. Steel must be AISI 4340 heat treated, or of equal strength (260ksi Tensile Strength minimum) and properties for all fabrication of the mounting bracket, stop block bracket top and bottom, stop block, and stiffener bar. All other components must be steel with a min yield strength of 36ksi.

3.2.2. Manufacture per contract drawings, coordinate with designer of record for any discrepancies or changes required.

3.2.3. The overall dimensions of an assembled unit must be within the tolerances indicated on the drawings or as specified for the item of work. Where tolerances are not specified in other sections of these specifications or shown, a variation of 1/32 inch is permissible in the overall length of component members with both ends milled and component members without milled ends must not deviate from the dimensions shown by not more than 1/16 inch.

3.2.4. Some dimensions are driven by existing components. Field verify all dimensions prior to beginning any fabrication of parts.

3.2.5. Provide hex head cap screws of the type specified or indicated. Use SAE J429 Grade 8 high strength screws unless other specified. Preload all bolts to 75% of proof load at assembly.

3.2.6. Provide UHMW wear strips in thickness and locations specified on contract drawings.

3.2.7. Provide metal wedge and 1in thick stop plate. Stop plate is 15”x15”. Metal wedge is estimated to be

15” long, 3 3/4” deep. Field verify dimensions and provide rough stock appropriate for machining to final dimensions. Match material to that of the stop block.

3.2.8. Assemble and test lock assembly in shop to ensure functionality prior to delivery.

3.2.9. Paint System

3.2.9.11. Paint Formulations: Paint formulas must comply with the following:

Formula VZ-108d, Vinyl-Type Zinc-Rich Impacted Immersion Coating

Ingredients Percent by Mass Pounds Gallons Component A

Vinyl Resin, Type 3 16.6 109.2 9.65 Methyl Isobutyl Ketone 80.6 528.9 79.30 Suspending Agent E 0.7 4.6 0.28 Suspending Agent F 0.4 2.7 0.19 Methanol 0.5 3.3 0.50 Synthetic Iron Oxide (Red) 1.2 7.9 0.19 Total 100.0 656.6 90.11

Component B Silane B 100.0 4.1 0.47

Component C Zinc Dust 100.0 550.0 9.42

Total 100.00 (mixed paint)

Formula V-766e , Vinyl-Type White (or Gray) Impacted Immersion Coating

Ingredients Percent by Mass Vinyl Resin, Type 3 5.6 Vinyl Resin, Type 4 11.6 Titanium Dioxide and (for Gray) Carbon Black

13.0

Diisodecyl Phthalate 2.9 Methyl Isobutyl Ketone 32.0 Toluene 34.7 Ortho-Phosphoric Acid 0.2 Total 100.0

3.2.9.12. Paint Schedule: System No. 5-E-Z

Paint shall be spray applied to an average dry film thickness of a minimum of 7.0 mils for the completed system, and the thickness at any point shall not be less than 6 mils. The dry film thickness of the zinc-rich primer shall be approximately 2.5 mils. The specified film thickness shall be attained in any event, and any extra coats needed to attain the specified thickness shall be applied at no additional cost to the Government. Attaining the specified film thickness by applying fewer than the prescribed number of coats or spray passes will be acceptable provided heavier applications do not cause an increase in pinholes, bubbles, blisters, or voids in the dried film and also provided that not more than 2.0 mils (dry film thickness) per double spray coat nor more than

1.0 mil per single spray pass of nonzinc paint shall be applied at one time. Paint all exposed surfaces after assembly.

SYSTEM NO. 5-E-Z

SURFACE

PREPARATION

1st COAT 2nd COAT 3rd COAT 4th COAT

White metal blast cleaning to

SSPC SP

5/NACE No. 1

Vinyl zinc-rich VZ-108d (double spray coat)

Gray Vinyl V- 766e (double spray coat)

White Vinyl V- 766e (double spray coat)

Gray Vinyl V- 766e (double spray coat)

3.3. HYDRAULIC CYLINDER

This section details the requirements for the hydraulic cylinder to operate the gate lock.

3.3.1. Cylinder must be single acting, spring extend, and suitable for use with an ISO 68 Turbine Oil.

3.3.2. Oil pressure to the cylinder: 1000 psi.

3.3.3. Minimum required stroke length: 6in.

3.3.4. Spring force: 75lbf at full extension

3.3.5. Mounting style: Front flange per contract drawings.

3.3.6. Rod end: Standard UNF male threads, match with threads for stop block.

3.3.7. Position cylinder ports to allow for best air bleed.

3.3.8. Port size and type: ½ in SAE O-ring

3.4. GATE LOCK SOLENOID VALVES

3.4.1. Solenoid valves must be two way and normally open. Valves must be constructed of either brass or equivalent material to prevent galvanic corrosion with the stainless-steel governor tubing. Valves must be capable of handling pressures of up to 1000psi. Coils shall be rated to operate at 125VDC.

Valves must conform to ASME B16.34 and ASME B16.10.

3.5. HYDRAULIC FLOW CONTROL VALVE

3.5.1. Valves must be brass or equivalent material to prevent galvanic corrosion with the stainless-steel governor tubing and threaded, in accordance with ASME B1.20.1. Valve flow rate must be adjustable in the field and able to be set in position. Valves must be capable of handling pressures of up to 1000psi. Valves must conform to ASME B16.34 and ASME B16.10.

3.6. BALL VALVES

3.6.1. Valves must be brass or equivalent material to prevent galvanic corrosion with the stainless-steel governor tubing threaded, in accordance with ASME B1.20.1. Valves must have the ability to be manually locked out. Valves must be capable of handling pressures of up to 1000psi. Valves must conform to ASME B16.34 and ASME B16.10.

3.7. CHECK VALVES

3.7.1. Valves must be brass or equivalent material to prevent galvanic corrosion with the stainless-steel governor tubing threaded, in accordance with ASME B1.20.1. Valves must be capable of handling pressures of up to 1000psi. Valves must conform to ASME B16.34 and ASME B16.10.

3.8. AUTOMATIC THREE-WAY VALVES

3.8.1. Valves must be brass or equivalent material to prevent galvanic corrosion with the stainless-steel governor tubing threaded, in accordance with ASME B1.20.1. Valves must be capable of handling pressures of up to 1000psi. Valves must conform to ASME B16.34 and ASME B16.10.

3.9. LIMIT SWITCHES

Two limit switches shall be provided per gate lock. An additional 2 spare switches per plant will also be furnished. Contractor will provide a complete assembly to activate the limit switches. One switch shall indicate lock is fully closed and one limit switch shall indicate gate lock is fully open. Switches shall be wired by others in the field.

3.9.1. Limit switches shall be Honeywell lever action GLA series (or approved equal). Each switch shall be DPDT snap action with contacts rated for 125VDC.

3.9.2. Limit switch mounting bracket shall be designed so that both limit switch locations can be easily changed to calibrate location for fully open and fully close

3.9.3. Contractor shall provide 3/8” threaded rod that threads into the stop block, goes through the mounting plate and activates the limit switches. An adjustable lever alarm shall be attached to the rod to activate the limit switches.

3.10. JUNCTION BOX

Junction box shall be ANSI grey NEMA type 12, Dimension shall be 12”x10”x4”. Junction box shall be oriented for easy connection to the limit switches.

3.11. TERMINAL BLOCKS

Eight (8) terminal blocks shall be mounted on din rail in each junction box. Terminal blocks shall be heavy duty switch type, screw clamp, push turn (1/4) knob type switching, rated at 600V and 20A minimum, accept wire sizes from #22 to #8, din rail mountable.

3.12. CONTROL SWITCH

Furnish 3, 2-position Electroswitch model 24 switches for Lower Granite Dam. Switches shall have black pistol grip, maintained action. Nameplate shall be labeled OFF and AUTO. Off position shall be at 0 degrees and AUTO position shall be at 45 degrees. Contacts shall be rated for 125VDC at 3 amps.

3.13. SHOP INSPECTION AND TESTING (FACTORY TEST)

3.13.1. Perform shop inspection and operational test (Factory Test) of the new wicket gate servo locks prior to shipping the first assembly. Shop inspections will not be required after acceptance of first assembly.

3.13.2. The Shop Inspection and Testing must be performed by the Contractor and witnessed by the Contracting Officer and representatives from the Hydroelectric Design Center (HDC), unless waived in writing. If shop inspection and testing is planned for a facility within the United States, notify the Government a minimum of 14 calendar days in advance of the dates of the shop inspection and testing. If shop inspection and testing is planned for a facility outside the United States, notify the Government a minimum of 60 calendar days in advance of the dates of the shop inspection and testing. Provide additional notification if there is any change in the dates.

3.14. SHOP DRAWINGS

3.14.1. DEFINITIONS

3.14.1.11. Contract Drawings

Contract drawings are the set of Design Drawings furnished by the Government for this contract. Contract Drawings form a part of the legal contract between the Contractor and Government, and do NOT include FIO's or Resource Drawings.

3.14.1.12. Shop Drawings

Shop drawings are a drawing or set of drawings produced by the contractor, supplier, manufacturer, subcontractor, or fabricator for the following purposes: Manufacturer's or Contractor's drawn version of information shown in the construction documents. Drawn to explain the fabrication and/or installation of the items, in the construction documents, to the Manufacturer's production crew or Contractor's installation crews. See paragraph "Format for SD-02 Shop Drawings", for Shop Drawing requirements.

3.14.1.13. As-Built Drawings

As-Built drawings serve as the basis for the creation of the Record Drawings (see paragraph "Record Drawings"). As-Built drawings are maintained by the Contractor to depict actual conditions throughout [construction], including deviations from the Contract Drawings. These deviations and additions may result from coordination required by, but not limited to: contract modifications; official responses to Contractor submitted Requests for Information; direction from the Contracting Officer; designs which are the responsibility of the Contractor, and differing site conditions. Submit As-Built Drawings in pdf or Bentley Navigator.

3.14.1.14. Record Drawings

The Record drawing set includes all Contract Drawing and accepted final As-Built drawing updates in CAD format. See paragraph "CAD File Requirements".

3.14.1.15. FINAL SHOP DRAWINGS

Upon completion of the work under this contract, submit for review and approval by the Contracting Officer, a copy, in ADOBE .pdf, of the final SHOP DRAWINGS. All drawings submitted to the Contracting Officer shall be in accordance with paragraph "Format for SD-02 Shop Drawings". The drawings shall show all changes and revisions, including any field changes, made up to the time that the work is completed and accepted.

3.14.2. CAD FILE REQUIREMENTS

1. The following applies to all CAD File submittals, unless otherwise noted:

a. Furnish CAD files in the latest version of Bentley DGN format, for all CAD Files submitted by the Contractor in performance of this contract.

b. Unless otherwise noted, all CAD Files shall meet A/E/C CAD and Graphic

Standards, as follows:

c. Compliant with the A/E/C CAD Standard ERDC/ITL TR-19-7, A/E/C Graphics Standard ERDC/ITL TR-19-6.

d. CAD Files shall have presentation graphics which can be edited by Bentley software

(with the exception of photographs). Presentation graphics typically consist of drawing elements such as lines, arcs, shapes, text, and their attributes (e.g., color, width, line style)

2. If CAD files are developed in a format other than the specified Bentley software, furnish the following:

a. The converted CAD files in Bentley DGN format, in compliance with all specified CAD file requirements.

b. The original CAD files in their native file format.

c. In addition to CAD files, submit an ADOBE .pdf of each CAD File. The pdfs and the CAD files shall be identical.

d. Submit files using the DoD SAFE (Secure Access File Exchange) website as directed by the Contracting Officer.

e. The shop drawings are not required to comply with A/E/C CAD and Graphic Standards.

f. Furnish a complete set of Shop Drawings in Bentley DGN format for all Shop drawings produced by the Contractor in performance of this contract. Submittal of concrete placement drawings, concrete reinforcement drawings, and concrete formwork drawings are not required.

3. Furnish an index drawing for all Shop drawing submittal sets. Index shall include the following for each Shop drawing:

a. Sheet Number.

b. File Number.

c. Drawing Title.

d. CAD File Name.

e. Furnish an electronic spread sheet of the index to include all information specified in paragraph "Format for SD-02 Shop Drawings". Spread sheet shall be compatible with Microsoft Excel.

3.14.3. FORMAT FOR SD-02 SHOP DRAWINGS

1. All shop drawings prepared by the Contractor for this contract shall be formatted to American

National Standards Institute (ANSI D).

a. All shop drawings shall have a title block prepared by the Contractor independent of any Contract Drawing. Include a revision block.

b. Title block shall include project title, sheet description, sheet number, contract number and issue date.

c. Revision block shall contain revision mark, revision description, date of revision.

d. Each Sheet shall have a unique number.

e. Each sheet shall have the Contractor Firm name on it.

2. CAD requirements for Shop Drawings include the following:

a. CAD file(s) meeting requirements of paragraph "CAD File Requirements".

b. An Adobe .pdf copy of the corresponding CAD file(s). The pdfs and CAD files shall be identical.

c. Shop drawing format does not need to comply with A/E/C CAD and Graphic

Standards.

3.14.4. SHOP DRAWING SUBMITTALS

Shop Drawing Submittals are required as follows:

1. As shown and specified in the plans and specifications during design and Construction.

2. As specified

3.14.5. FINAL AS-BUILT DRAWINGS

1. At the completion of the work, submit, in accordance with FAR CLAUSE 52.211-9, a copy of the Final As-Built Drawings, after all As-Built conditions from the working as-built drawings have been incorporated in the CAD drawings. Submit in ADOBE .pdf format.

2. In preparation for submitting Record Drawings, once the Final As-Built Drawings are approved, populate the CAD File Status Field with "Record Drawing" to comply with the A/E/C Graphic Standards ERDC/ITL TR-19-6, Border Sheet Status Section.

3.14.6. RECORD DRAWINGS - CAD FILES

1. After approval of the final As-Built Drawings submittal, the Contractor shall create the CAD

Record Drawings to update the Contract Drawings with the as-built conditions. The Record Drawing files shall be in the same drawing format as initially provided by the Government. The Government will provide all original CAD files of the contract drawings, in Bentley DGN format.

2. Record Drawings submittal shall meet requirements of paragraph "CAD File Requirements".

3.14.7. SUPERSEDED AND/OR OBSOLETE FIO OR RESOURCE DRAWINGS

Identify FIO or Resource drawings which are superseded and/or obsolete. Mark superseded drawings with a red X across the entire drawing and the word "SUPERSEDED" in red across the title block.

Mark obsolete drawings with a red X across the entire drawing and the word "OBSOLETE" in red across the title block. Make an additional note on the superseded drawing giving the file number of the drawing that has replaced the superseded drawing, if applicable. For both superseded and obsolete drawings, draw a red line through the name of the drawing on the contract drawing index sheet.

(End of Statement of Work)

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 120 dys. ADC 1 ARMY CORPS OF ENGINEERS

PERFORMANCE SPECIALIST

LITTLE GOOSE LOCK AND DAM

1001 LITTLE GOOSE DAM RD

DAYTON WA 99328-9753

509-399-2233 X279

960500

0002 240 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0003 240 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0004 240 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0005 240 dys. ADC 1 ARMY CORPS OF ENGINEERS

PERFORMANCE SPECIALIST

LOWER GRANITE PROJECT

885 ALMOTA FERRY ROAD

POMEROY WA 99347-9758

509-843-1493 EXT216

960558

0006 240 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0007 240 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0008 240 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

52.247-34 F.O.B. Destination NOV 1991

52.211-9 DESIRED AND REQUIRED TIME OF DELIVERY (JUN 1997)

(a) The Government desires delivery to be made according to the following schedule:

DESIRED DELIVERY SCHEDULE

[Contracting Officer insert specific details]

BID ITEM NO. QUANTITY WITHIN DAYS AFTER

CONTRACT AWARD

0001 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 120 DAYS

0002 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0003 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0004 Fabricate And Deliver One Set of Spare Components For

Wicket Gate Lock

1 Set 240 DAYS

0005 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0006 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0007 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0008 Fabricate And Deliver One Set of Spare Components For

Wicket Gate Lock

1 Set 240 DAYS

WITHIN DAYS

ITEM NO. QUANTITY AFTER DATE

OF CONTRACT

If the offeror is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However, the offeror's proposed delivery schedule must not extend the delivery period beyond the time for delivery in the Government's required delivery schedule as follows:

REQUIRED DELIVERY SCHEDULE

[Contracting Officer insert specific details]

BID ITEM NO. QUANTITY WITHIN DAYS AFTER

CONTRACT AWARD

0001 Fabricate And Deliver One Set of Components For Wicket

1 Set 120 DAYS

Gate Lock 0002 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0003 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0004 Fabricate And Deliver One Set of Spare Components For

Wicket Gate Lock

1 Set 240 DAYS

0005 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0006 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0007 Fabricate And Deliver One Set of Components For Wicket

Gate Lock

1 Set 240 DAYS

0008 Fabricate And Deliver One Set of Spare Components For

1 Set 240 DAYS

WITHIN DAYS

ITEM NO. QUANTITY AFTER DATE

OF CONTRACT

Offers that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the offeror proposes no other delivery schedule, the desired delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

WITHIN DAYS

ITEM NO. QUANTITY AFTER DATE

OF CONTRACT

BID ITEM NO. QUANTITY WITHIN DAYS AFTER

CONTRACT AWARD

0001 Fabricate And Deliver One Set of Components For Wicket

1 Set

0002 Fabricate And Deliver One

0003 Fabricate And Deliver One Set of Components For Wicket

0004 Fabricate And Deliver One Set of Spare Components For

0005 Fabricate And Deliver One

0006 Fabricate And Deliver One

0007 Fabricate And Deliver One

0008 Fabricate And Deliver One Set of Spare Components For

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day the award is dated. Therefore, the offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

Section I - Contract Clauses

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-7 System for Award Management OCT 2018 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

JUN 2016

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

JUL 2018

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

AUG 2020

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

JUN 2020

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.219-6 Notice Of Total Small Business Set-Aside MAR 2020 52.219-28 Post-Award Small Business Program Rerepresentation MAY 2020 52.219-33 Nonmanufacturer Rule MAR 2020 52.222-3 Convict Labor JUN 2003 52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2020 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-35 Equal Opportunity for Veterans JUN 2020 52.222-36 Equal Opportunity for Workers with Disabilities JUN 2020 52.222-37 Employment Reports on Veterans JUN 2020 52.222-50 Combating Trafficking in Persons OCT 2020 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.225-8 Duty-Free Entry OCT 2010 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.243-1 Changes--Fixed Price AUG 1987 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

DEC 2019

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.204-7021 Contractor Compliance with the Cybersecurity Maturity

Model Certification Level Requirement

NOV 2020

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017 252.225-7048 Export-Controlled Items JUN 2013 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.247-7023 Transportation of Supplies by Sea FEB 2019

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplemental (48 CFR 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.236-7001 CONTRACT DRAWINGS, MAPS, AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall--

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Drawing Number

Sheet Number

Title

Revision

Date

LITTLE GOOSE LOCK AND DAM

GENERAL

LPG-1.001-0/1 G-001

PROJECT LOCATION AND

VICINITY MAPS

LPG-1.001-0/2 G-002 INDEX TO DRAWINGS

MECHANICAL INSTALL

LPG-1.001-3-0/1 M-101 SERVO ASSEMBLY

LPG-1.001-3-0/2 M-102 SERVO ASSEMBLY OPERATION

LPG-1.001-3-0/3

M-103 STOP BLOCK BRACKET TOP-

SHEET 1

LPG-1.001-3-0/4

M-104 STOP BLOCK BRACKET TOP-

SHEET 2

LPG-1.001-3-0/5 M-105 STOP BLOCK BRACKET BOTTOM

LPG-1.001-3-0/6

M-501 SERVO ASSEMBLY DETAILS

LPG-1.001-3-0/7

M-502 SERVO ASSEMBLY DETAILS

RESOURCE DRAWINGS

The Government does not warrant the accuracy of the RESORCE drawings. The Government recommends that the Contractor verify the accuracy of RESOURCE drawings.

4490-ATF-1 R-001

29" DIAMETER SERVO MOTOR

ASSEMBLY

6522-BO-1 R-002

AUTOMATIC GATE LOCK

Drawing Number

Sheet

Title

Revision

Date

LOWER GRANITE LOCK AND DAM

GENERAL

GDP-1.002-0/1 G-001

PROJECT LOCATION AND

VICINITY MAPS

GDP-1.002-0/2 G-002 INDEX TO DRAWINGS

MECHANICAL INSTALL

GDP-1.002-3-0/1 M-101 SERVO ASSEMBLY

GDP-1.002-3-0/2

M-102 SERVO ASSEMBLY

OPERATION

GDP-1.002-3-0/3

M-103 STOP BLOCK BRACKET TOP

GDP-1.002-3-0/4

M-104 STOP BLOCK BRACKET TOP

GDP-1.002-3-0/5

M-105 STOP BLOCK BRACKET

BOTTOM

GDP-1.002-3-0/6

M-501 SERVO ASSEMBLY DETAILS

GDP-1.002-3-0/7

M-502 SERVO ASSEMBLY DETAILS

RESOURCE DRAWINGS

The Government does not warrant the accuracy of the RESORCE drawings. The Government recommends that the Contractor verify the accuracy of RESOURCE drawings.

4490-ATF-1 R-001

29" DIAMETER SERVO

MOTOR ASSEMBLY

6522-BO-1 R-002

AUTOMATIC GATE LOCK

(End of drawing list)

Contract drawings created on CADD will be available in electronic form for use by the Contractor. No For

Information Only drawings are available on CADD. The Contractor assumes all risks associated in using electronic CADD drawings. The contract drawings shall govern if there are any discrepancies between the electronic copy and the contract drawing. The Contractor shall promptly notify the Contracting Officer of any discrepancies. The Government will not be responsible to correct the electronic CADD drawing. If contract modifications are issued, the associated electronic CADD drawings will not be available to the Contractor. Electronic copies of CADD drawings are only available in Bentley MicroStation format. The Government will provide the files on CD ROM. If the Contractor requires different media, such as floppy disks, the Contractor shall be responsible for all conversions required for their use and associated conversion inaccuracies.

(End of Clause)

Section J - List of Documents, Exhibits and Other Attachments

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 A.03.09 VOL 1

W912EF21Q0023 Plans

Attachment 2 A.03.09 VOL 2 W912EF21Q0023 Plans

Section K - Representations, Certifications and Other Statements of Offerors

52.204-8 Annual Representations and Certifications MAR 2020 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

AUG 2020

52.204-26 Covered Telecommunications Equipment or Services-- Representation.

DEC 2019

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation

NOV 2015

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law

FEB 2016

252.203-7005 Representation Relating to Compensation of Former DoD Officials

NOV 2011

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in the provision at 52.204-26, Covered Telecommunications Equipment or Services--Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [] will, [] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [] does, [] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

52.225-18 PLACE OF MANUFACTURE (AUG 2018)

(a) Definitions. As used in this provision--

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly--

(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) ( ___ ) Outside the United…