Attachment No. 1 - Listing of Minimum Specifications.pdf
PDF 102 KB Posted
- Attached to
- Tunable Lasers and Optical Power Meter
- Solicitation number
- FA875126Q0891
About this file
This is a minimum specifications attachment for federal contract FA875126Q0891 outlining technical requirements for optical equipment procurement. The solicitation requires four line items totaling five units of specialized laser and measurement equipment.
Item 1 specifies one tunable laser with a tuning range of 1240-1380 nm or wider, featuring PM fiber output with FC-APC compatible connector, wavelength sweep capability of at least 100 nm/s, wavelength resolution of 0.1 pm or finer, and signal-to-noise ratio of 90 dB/0.1 nm or higher. The laser must deliver output power exceeding 10 dBm at both 1310 nm and 1351 nm, with wavelength stability better than 5 pm, wavelength accuracy of 20 pm or more, and wavelength repeatability of 6 pm or better. Additional requirements include power stability and repeatability of 0.05 dB or better, relative intensity noise below -140 dB/Hz at 100 MHz from carrier, instantaneous linewidth under 10 kHz, and coherence control capability less than 50 MHz with fine tuning scan range of 10 GHz or higher. Item 2 specifies an identical tunable laser with tuning range of 1480-1640 nm or wider and output power specifications at 1550 nm and 1558 nm instead of the lower wavelengths. Item 3 requires one optical power meter with minimum two detectors, adjustable averaging time from 100 microseconds to 1 second or wider, analog output of at least 2 volts across output range, and remote computer interface via USB or ethernet. Item 4 specifies two remote power meter heads with 2mm minimum size InGaAs detectors compatible with the power meter, wavelength range of 850-1700 nm or wider, power range of -80 to +8 dBm, power uncertainty less than 4%, power resolution below 0.01 dB, wavelength resolution of 1 nm or less, linearity of 5% deviation or less, and polarization dependent response less than 2% difference.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment No. 2 - Representations and Certifications.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA875126Q0891 Minimum Specifications
FA875126Q0891 Attachment No. 1
Item 1, Qty. 1 each – Tunable Laser meeting or exceeding the following specifications:
● Tuning Range: 1240-1380 nm or wider,
● PM Fiber output with FC-APC compatible connector
● At least 100 nm/s wavelength sweeps
● Wavelength resolution: 0.1 pm or finer
● signal-to-noise ratio: 90 dB/0.1 nm or higher
● Fine tuning scan range: 10 GHz or higher
● Typical wavelength stability: more stable than 5 pm
● Wavelength accuracy: 20 pm or more accurate
● Wavelength repeatability: 6 pm or more repeatable
● Output power at 1310 nm: >10 dBm,
● Output power at 1351 nm: >10 dBm
● Power stability: 0.05 dB or more stable
● Power repeatability: 0.05 dB or more stable
● Relative intensity noise at 100 MHz from carrier: less than -140 dB/Hz.
● Instantaneous linewidth: <10 kHz
● coherence control on: less than 50 MHz
Item 2, Qty. 1 each – Tunable Laser meeting or exceeding the following specifications:
● Tuning range: 1480 – 1640 nm or wider
● PM fiber output with FC-APC compatible connector
● At least 100 nm/s wavelength sweeps
● Wavelength resolution: 0.1 pm or finer
● signal-to-noise ratio: 90 dB/0.1 nm or higher
● Fine tuning scan range: 10 GHz or higher
● Typical wavelength stability: more stable than 5 pm
● Wavelength accuracy: 20 pm or more accurate
● Wavelength repeatability: 6 pm or more repeatable
● Output power at 1550 nm: >10 dBm,
● Output power at 1558 nm: >10 dBm
● Power stability: 0.05 dB or more stable
● Power repeatability: 0.05 dB or more stable
● Relative intensity noise at 100 MHz from carrier: less than -140 dB/Hz.
● Instantaneous linewidth: <10 kHz
● coherence control on: less than 50 MHz
Item 3, Qty. 1 each – Optical Power Meter meeting or exceeding the following specifications:
• Optical Power Meter, 2 Detectors minimum
• Adjustable averaging time: 100 microseconds to 1 second or wider
FA875126Q0891 Minimum Specifications
FA875126Q0891 Attachment No. 1
• Analog output: at least 2 volts across output range
• Remote interface for computer via USB or ethernet
Item 4, Qty. 2 each – Remote Power Meter head meeting or exceeding the following specifications:
• 2mm size minimum, InGaAs Remote Head
• Must be compatible with power meter above
• Wavelength range: 850 – 1700 nm or wider
• Power range: -80 to +8 dBm
• Power uncertainty across range: less than 4%
• Power resolution: less than 0.01 dB
• Wavelength resolution: 1 nm or less
• Linearity: 5% deviation or less across entire wavelength range
• Polarization dependent response: less than 2% difference
File details come from the government source that posted it. Updated .