Attachment_C_-_Spec_3990-01A-01_REV1.pdf
PDF 302 KB Posted
- Attached to
- Statewide Contract CA|1-22-55-10A|0000054156
- Contract number
- 1-22-55-10A
- Issued by
- California
About this file
This document is a State of California Department of General Services (DGS) Bid Specification for wooden pallets, specifically Bid Specification 3990-01A-01 Revision 1, dated February 10, 2020. The specification is designed for multiple agencies and is part of an event with multiple identifiers, indicating it is a statewide contract for standardized wooden pallet procurement.
The specification details technical requirements for wooden pallets intended for use with low lift pallet trucks or forklifts. It outlines six different pallet sizes (ranging from 42"L x 36"W to 48"L x 48"W) and two primary pallet types: Type 2 (standard) and Type 4 (single wing). Each pallet size specification includes precise requirements for top and bottom deck board dimensions, placement, and quantity. The document emphasizes that all pallets must be of sturdy construction and in adequate condition to ensure safe goods delivery. There are no specific pricing terms, contract amounts, or renewal periods mentioned in this technical specification document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_A_Contract_Pricing_Supp_2.xlsx | XLSX spreadsheet | |
| Attachment_B_-_State_of_CA_Bid_Spec_5510-5990.pdf | ||
| Attach._B_-_SCBA_Spec_2-2022.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California Bid Specification
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple Attachment C
Lai, Y Page 1 of 5 FEB. 10, 2020
Document Summary Detail Type Detail Event ID Multiple Commodity PALLETS, WOODEN Attachment (Exhibit) Attachment C Group-Class 3990 Bid Specification 3990-01A-01 Revision Level 1 Revision Date Feb 10, 2020 Agency Name Multiple
Revision History Bid Spec
Rev Level
Revision Date
Author Summary of Changes
3990-01A-01 0 Jan, 2001 Staff Initial release 3990-01A-01 1 Jan 21, 2020 Lai, Y ADA compliance, removed non-applicable requirements.
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 2 of 5 FEB. 10, 2020
Table of Contents Document Summary Revision History Table of Contents
1.0 SCOPE
2.0 APPLICABLE LAWS and INDUSTRY STANDARDS
3.0 TECHNICAL REQUIREMENTS
3.1 COMMONLY USED PALLET TYPES
3.2 COMMONLY USED PALLET SIZE
3.3 PALLETS QUALITY
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 3 of 5 FEB. 10, 2020
1.0 SCOPE
This specification covers wooden pallets intended for use with low lift pallet trucks or forklift trucks.
2.0 APPLICABLE LAWS and INDUSTRY STANDARDS
Not applicable
3.0 TECHNICAL REQUIREMENTS
3.1 COMMONLY USED PALLET TYPES
The pallets shall be constructed base on the type in Figure 1 and Figure 2.
Figure 1 – Type 2 Wooden Pallet
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 4 of 5 FEB. 10, 2020
Figure 2 - Type 4 Single Wing Wooden Pallet
3.2 COMMONLY USED PALLET SIZE
The pallets shall be constructed base on the size in Table 1.
Table 1- Commonly Used Pallet Types & Size
SIZE TYPE TOP DECK BOTTOM DECK
1 2 (Fig. 1) 42”L x 36”W
Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width
42”L x 36”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers Two at center of the stringers
2 2 (Fig. 1) 42”L x 42”W Min. Six 1” x 6” x 42” deck-boards, spaced evenly along the pallet width
42”L x 42”W Min. Four 1” x 6” x 42” boards.
One placed each end of the stingers Two at center of the stringers
3 2 (Fig. 1) 44”L x 44”W Min. Six 1” x 6” x 44” deck-boards, spaced evenly along the pallet width
44”L x 44”W Min. Four 1” x 6” x 44” boards.
One placed each end of the stingers Two at center of the stringers(Fig. 1)
4 2 (Fig. 1) 45”L x 36”W Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width
45”L x 36”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers Two at center of the stringers
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 5 of 5 FEB. 10, 2020
5 2 (Fig. 1) 46”L x 44”W Min. Six 1” x 6” x 44” deck-boards, spaced evenly along the pallet width
46”L x 44”W Min. Four 1” x 6” x 44” boards.
One placed each end of the stingers Two at center of the stringers
6 2 (Fig. 1) 48”L x 48”W Min. Six 1” x 6” x 48” deck-boards, spaced evenly along the pallet width
48”L x 48”W Min. Four 1” x 6” x 48” boards.
One placed each end of the stingers Two at center of the stringers
1 4 (Fig. 2) 42”L x 36”W Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width with 3” wings extending beyond the stringers outboard faces Note: SIZE 1, TYPE 4 - has a single wing applied to top deck.
42”L x 30”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers, Two at center of the stringers
3.3 PALLETS QUALITY
All pallets shall be of sturdy construction and adequate condition to assure delivery of the goods without damage to the goods or safety hazards.
| Document Summary |
| Revision History |
| Table of Contents |
| 1.0 SCOPE |
| 2.0 APPLICABLE LAWS and INDUSTRY STANDARDS |
| 3.0 TECHNICAL REQUIREMENTS |
| 3.1 COMMONLY USED PALLET TYPES |
| 3.2 COMMONLY USED PALLET SIZE |
| 3.3 PALLETS QUALITY |
File details come from the government source that posted it. Updated .