Attachment_B_State_of_CA_Specification_Pallets,_Wooden.pdf
PDF 302 KB Posted
- Attached to
- Statewide Contract CA|1-21-16-01|0000188855
- Contract number
- 1-21-16-01
- Issued by
- California
About this file
This document is a State of California Bid Specification for wooden pallets, issued by the Department of General Services (DGS) with a revision date of February 10, 2020. The specification (Bid Specification 3990-01A-01, Revision 1) is designed for multiple agencies and covers the procurement of wooden pallets intended for use with low lift pallet trucks or forklift trucks.
The specification provides detailed technical requirements for two primary pallet types: Type 2 (standard rectangular) and Type 4 (single wing), with six different size configurations ranging from 42"L x 36"W to 48"L x 48"W. The document outlines precise construction specifications for top and bottom deck boards, including minimum board dimensions, placement, and spacing. Each pallet type must be of sturdy construction to ensure safe goods delivery without damage. The specification does not include pricing information, applicable laws, or industry standards, focusing instead on the physical and structural requirements for wooden pallets to be used by California state agencies.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_A_Contract_Pricing_Sup_7_1-21-16-01.xlsx | XLSX spreadsheet | |
| User_Instructions_13-02B_Supp._9.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California Bid Specification
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple Attachment B
Lai, Y Page 1 of 5 FEB. 10, 2020
Document Summary Detail Type Detail Event ID Multiple Commodity PALLETS, WOODEN Attachment (Exhibit) Attachment 2a Group-Class 3990 Bid Specification 3990-01A-01 Revision Level 1 Revision Date Feb 10, 2020 Agency Name Multiple
Revision History Bid Spec
Rev Level
Revision Date
Author Summary of Changes
3990-01A-01 0 Jan, 2001 Staff Initial release 3990-01A-01 1 Jan 21, 2020 Lai, Y ADA compliance, removed non-applicable requirements.
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 2 of 5 FEB. 10, 2020
Table of Contents Document Summary Revision History Table of Contents
1.0 SCOPE
2.0 APPLICABLE LAWS and INDUSTRY STANDARDS
3.0 TECHNICAL REQUIREMENTS
3.1 COMMONLY USED PALLET TYPES
3.2 COMMONLY USED PALLET SIZE
3.3 PALLETS QUALITY
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 3 of 5 FEB. 10, 2020
1.0 SCOPE
This specification covers wooden pallets intended for use with low lift pallet trucks or forklift trucks.
2.0 APPLICABLE LAWS and INDUSTRY STANDARDS
Not applicable
3.0 TECHNICAL REQUIREMENTS
3.1 COMMONLY USED PALLET TYPES
The pallets shall be constructed base on the type in Figure 1 and Figure 2.
Figure 1 – Type 2 Wooden Pallet
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 4 of 5 FEB. 10, 2020
Figure 2 - Type 4 Single Wing Wooden Pallet
3.2 COMMONLY USED PALLET SIZE
The pallets shall be constructed base on the size in Table 1.
Table 1- Commonly Used Pallet Types & Size
SIZE TYPE TOP DECK BOTTOM DECK
1 2 (Fig. 1) 42”L x 36”W
Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width
42”L x 36”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers Two at center of the stringers
2 2 (Fig. 1) 42”L x 42”W Min. Six 1” x 6” x 42” deck-boards, spaced evenly along the pallet width
42”L x 42”W Min. Four 1” x 6” x 42” boards.
One placed each end of the stingers Two at center of the stringers
3 2 (Fig. 1) 44”L x 44”W Min. Six 1” x 6” x 44” deck-boards, spaced evenly along the pallet width
44”L x 44”W Min. Four 1” x 6” x 44” boards.
One placed each end of the stingers Two at center of the stringers(Fig. 1)
4 2 (Fig. 1) 45”L x 36”W Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width
45”L x 36”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers Two at center of the stringers
PALLETS, WOODEN
Multiple
3990-01A-01 Rev1
Event ID: Multiple
Lai, Y Page 5 of 5 FEB. 10, 2020
5 2 (Fig. 1) 46”L x 44”W Min. Six 1” x 6” x 44” deck-boards, spaced evenly along the pallet width
46”L x 44”W Min. Four 1” x 6” x 44” boards.
One placed each end of the stingers Two at center of the stringers
6 2 (Fig. 1) 48”L x 48”W Min. Six 1” x 6” x 48” deck-boards, spaced evenly along the pallet width
48”L x 48”W Min. Four 1” x 6” x 48” boards.
One placed each end of the stingers Two at center of the stringers
1 4 (Fig. 2) 42”L x 36”W Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width with 3” wings extending beyond the stringers outboard faces Note: SIZE 1, TYPE 4 - has a single wing applied to top deck.
42”L x 30”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers, Two at center of the stringers
3.3 PALLETS QUALITY
All pallets shall be of sturdy construction and adequate condition to assure delivery of the goods without damage to the goods or safety hazards.
| Document Summary |
| Revision History |
| Table of Contents |
| 1.0 SCOPE |
| 2.0 APPLICABLE LAWS and INDUSTRY STANDARDS |
| 3.0 TECHNICAL REQUIREMENTS |
| 3.1 COMMONLY USED PALLET TYPES |
| 3.2 COMMONLY USED PALLET SIZE |
| 3.3 PALLETS QUALITY |
File details come from the government source that posted it. Updated .