Attachment_9_AFMCForm158.pdf
PDF 1 MB Posted
- Attached to
- Bolt, Explosive, AMENDMENT 0002 Federal contract opportunity
- Solicitation number
- FA821321R3012
About this file
This document provides packaging and marking requirements for a federal contract opportunity involving explosive bolts. The packaging requirements specify that items must be packaged and marked according to Military Standards MIL-STD-2073-1 and MIL-STD-129 for military packaging and marking. Hazardous materials must comply with regulations for air and maritime shipments. Wood packaging must meet International Standards for Phytosanitary Measures Number 15. Warranted items must be marked with warranty information. The related solicitation is for 581 explosive bolts identified as CANOPY ACTUATED RELEASE BOLT (CARB), EXPLOSIVE under National Stock Number 1377010855974ES or alternate number 1377014619131ES, issued by the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821321R3012_______0002.pdf | ||
| FA821321R3012_______0001.pdf | ||
| Attachment_10_Transportation_Instructions.pdf | ||
| Attachment_3_Air_Specification.pdf | ||
| Attachment_1_Exhibit_A_CDRLs.pdf | ||
| FA821321R3012.pdf | ||
| Attachment_7_SPI_0855974.pdf | ||
| Attachment_2_ADC_SOW_Jan2018.pdf | ||
| Attachment_8_Packaging_SOW.pdf | ||
| Attachment_4_CADPAD_Item_Marking_Instruction.pdf | ||
| Attachment_6_REPSHIP_11Mar14.pdf | ||
| Attachment_5_QALI.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
For the best experience, open this PDF portfolio in
Acrobat X or Adobe Reader X, or later.
Get Adobe Reader Now!
http://www.adobe.com/go/reader
PACKAGING REQUIREMENTS
AFMC FORM 158, 20150424
PR, MIPR, OR DOCUMENT 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:
SEE REVERSE FOR SPECIFIC INSTRUCTIONS:
1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.
ITEM ID
QUP
MIL-STD-2073-1
PRES PACK
(X) (A/B)
COMMERCIAL
ASTM D3951
PACKPRES
(X) (X)
MIL-STD-129
MARKING
(X)
SPECIAL
PACKAGING
INSTRUCTION
NUMBER
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
A. ENGINEERED OR SPECIALIZED CONTAINERS (CDRS)
B. PACKAGING OF HAZARDOUS MATERIALS
C. PACKAGING DATA (Coded and/or Special Packaging Instructions)
D. MARKING OF WARRANTED ITEMS, ITEM NAME(S)
E. WOOD PACKAGING MATERIAL ISPM 15
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
ORGANIZATION PACKAGING SPECIALIST (Typed Name)
QUANTITY
QUP ICQ
PRES
METH
C D
MTL
WRAP
CUSH
DUNN
T
UNIT
CONT
INT
U
L
SPEC
MKG
O P I
UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE
10 LENGTH 1000THWHOLE CUBE10 WIDTH 10 DEPTH 10
PACKAGING SPECIALIST SIGNATURE DATE
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
AFMC FORM 158, 20150424 Page 2 of 2 Pages
ADDITIONAL INFORMATION
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:
SEE REVERSE FOR SPECIFIC INSTRUCTIONS:
1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
MIL-STD-129
MARKING
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUANTITY
QUP
ICQ
PRES METH
C D
PRES MTL
WRAP MTL
CUSH DUNN
C T
UNIT CONT
INT CONT
U C L
SPEC MKG
O P I
UNIT PACK WEIGHT
UNIT PACK SIZE
UNIT PACK CUBE
LENGTH
1000TH
WHOLE CUBE
WIDTH
DEPTH
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
AFMC FORM 158, 20150424
Page 2 of 2 Pages
11.0.1.20130826.2.901444.899636
TextField1: FD2020-21-50120
TextField1:
Unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129R.
TextField1: 406SCMS/GULAA
TextField1: STEPHANIE OYLER DSN 777-8836
CheckBox1: 0
CheckBox1: 1
CheckBox1: 0
CheckBox1: 1
CheckBox1: 1
TextField3: 1377-01-085-5974, 1377-01-461-9131
TextField3: 001
TextField3: X
TextField3: B
TextField3: X
TextField3: F01-085-5974
SignatureField1:
DateField1: 2021-03-04
TextField4:
Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1(packaging specialists fills in current edition), Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 (packaging specialists fills in current edition), Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 (packaging specialists fills in current edition), Container Design and Retrieval System (CDRS) Data Input.
Packaging and Marking of Hazardous Material Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-204_IP, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code.
Packaging Data (Coded and/or Special Packaging Instructions) The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MIL-STD-2073-1 (contracting officer fills in current edition), Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 (contracting officer fills in current edition), Preservation and Packing Data, and DI-PACK-80121(contracting officer fills in current edition), Special Packaging Instructions, apply.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129 (packaging specialists fills in current edition), Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (packaging specialists fills in current edition), e.g., unit serial numbers, original equipment manufacturer's (OEM) name, or OEM model number, as specified on the AFMC Form 158.
Marking of Warranted Items The contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with FAR 46.706(b)(5), Warranty Terms and Conditions.
Wood Packaging Material ISPM 15 All wood packaging must comply with the latest revision of International Standards for Phytosanitary Measures (ISPM) Number 15. https://www.ippc.int/index.php?id=1110589&L=0) Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1E, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129R, Standard Practice for Military Marking.
Specification Commercial Packaging (ASTM D3951)
(a) Items shall be packaged in accordance with American Society for Testing and Materials (ASTM) Specification D3951-18 Standard Practice for Commercial Packaging. Individual shipments exceeding 150 pounds, 108 inches in length, or 130 inches in girth plus length shall be packaged on skidded crates or palletized to allow handling by forklift.
(b) The exterior container shall be marked (readable from 24 inches): “ASTM D3951 -
NOT FOR OUTSIDE STORAGE.”
PR, MIPR, OR DOCUMENT 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:
SEE REVERSE FOR SPECIFIC INSTRUCTIONS:
1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.
ITEM ID
QUP
MIL-STD-2073-1
PRES PACK
(X) (A/B)
COMMERCIAL
ASTM D3951
PACKPRES
(X) (X)
MIL-STD-129
MARKING
(X)
SPECIAL
PACKAGING
INSTRUCTION
NUMBER
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
A. ENGINEERED OR SPECIALIZED CONTAINERS (CDRS)
B. PACKAGING OF HAZARDOUS MATERIALS
C. PACKAGING DATA (Coded and/or Special Packaging Instructions)
D. MARKING OF WARRANTED ITEMS, ITEM NAME(S)
E. WOOD PACKAGING MATERIAL ISPM 15
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
ORGANIZATION PACKAGING SPECIALIST (Typed Name)
QUANTITY
QUP ICQ
METH
D
WRAP
CUSH
DUNN
T
UNIT
INT
U
L
SPEC
MKG
O P I
UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE
10 LENGTH 1000THWHOLE CUBE10 WIDTH 10 DEPTH 10
PACKAGING SPECIALIST SIGNATURE DATE
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
AFMC FORM 158, 20150424 Page 2 of 2 Pages
ADDITIONAL INFORMATION
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:
SEE REVERSE FOR SPECIFIC INSTRUCTIONS:
1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
MIL-STD-129
MARKING
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUANTITY
QUP
ICQ
PRES METH
C D
PRES MTL
WRAP MTL
CUSH DUNN
C T
UNIT CONT
INT CONT
U C L
SPEC MKG
O P I
UNIT PACK WEIGHT
UNIT PACK SIZE
UNIT PACK CUBE
LENGTH
1000TH
WHOLE CUBE
WIDTH
DEPTH
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
AFMC FORM 158, 20150424
Page 2 of 2 Pages
11.0.1.20130826.2.901444.899636
TextField1: FD2020-21-50121
TextField1:
TextField1: 406 SCMS/GULAA
TextField1: DUSTIN HALE DSN 777-8841
CheckBox1: 0
CheckBox1: 1
CheckBox1: 0
CheckBox1: 1
CheckBox1: 1
TextField3: 1377-01-085-5974, 1377-01-461-9131
TextField3: 001
TextField3: X
TextField3: X
TextField3: X
TextField3: F01-085-5974
SignatureField1:
DateField1: 2020-12-15
TextField4:
B. Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation:
(a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200;
(b) Code of Federal Regulations (CFR) Title 49;
(c) Air Force Manual (AFMAN) 24-204_IP, Preparing Hazardous Materials for Military Air Shipment;
(d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and
(e) International Maritime Dangerous Goods (IMDG) Code.
D. The contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with Warranty Terms and Conditions.
E. ISPM:
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON SOLID WOOD PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE
DOCUMENTATION, SEE “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
(ISPM) NO. 15.” THIS DOCUMENT CAN BE FOUND AT www.ippc.int.
File details come from the government source that posted it. Updated .