Attachment_6_Special_Packaging_Instructions.pdf
PDF 398 KB Posted
- Attached to
- C-17 Arm-Fire Initator Federal contract opportunity
- Solicitation number
- FA8213-21-R-3040-Solicitation
About this file
This document contains a federal solicitation for C-17 arm-fire initiators and special packaging instructions for munitions. The solicitation is for supplies and services available from only one responsible source, Pacific Scientific Energetic Materials Company, as no other type of supplies or services will satisfy agency requirements. The Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base is the contracting agency. The special packaging instructions reference military standards for marking palleted ammunition and requirements for heat-treated, debarked wood in all wood packaging materials and containers to prevent the spread of invasive species.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment_4_SOW_Appendix_A_29April21.pdf | ||
| FA821321R3040.pdf | ||
| Attachment_9_AFMC_Form_158.pdf | ||
| Attachment_7_SOW_SPI.pdf | ||
| Attachment_5_ExhibitA_CDRLS.pdf | ||
| Attachment_2_QALI.pdf | ||
| Attachment_3_REPSHIP.pdf | ||
| Attachment_8_Transportation_Instructions.pdf | ||
| Attachment_1_Item_Marking_Instr_Ver1_5-20190501.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 07 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. WRAP ITEM WITH REF.-3. PLACE WRAPPED ITEM INSIDE BAG, REF.-2, REMOVE AIR AND SEAL.
2. TO PREVENT BAGS FROM TOUCHING SHIPPING CONTAINER AND PREVENT MOVEMENT USE CUSHIONING, REF.-1
AS REQUIRED.
3. SEAL CONTAINER WITH TAPE, REF.-4.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .