Attachment 6 GEOTEX_315ST_Product Data.pdf

Product Data

GEOTEX® 315ST

315ST

PROPERTY TEST METHOD ENGLISH METRIC

Grab Tensile Strength ASTM D-4632 315 lbs 1401 N

Grab Elongation ASTM D-4632 15% 15%

CBR Puncture ASTM D-6241 900 lbs 4003 N

Trapezoidal Tear ASTM D-4533 113 lbs 503 N

UV Resistance at 500 hrs ASTM D-4355 70% 70%

Apparent Opening Size (AOS) 3 ASTM D-4751 40 US Std. Sieve 0.425 mm

Permittivity ASTM D-4491 0.05 sec⁻¹ 0.05 sec⁻¹

Water Flow Rate ASTM D-4491 4 gpm/ft² 163 l/min/m²

12.5 ft x 360 ft

15.0 ft x 300 ft

17.5 ft x 258 ft

3.8 m x 109.8 m

4.6 m x 91.5 m

5.3 m x 78.6 m

ENGINEERED EARTH SOLUTIONS

TM

www.propexglobal.com

NOTES:

GEOTEX® 315ST is a woven polypropylene geotextile containing heavy woven tape/fibrillated yarns and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below.

These characteristics make GEOTEX® 315ST ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining walls. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils.

GEOTEX® 315ST conforms to the property values listed below¹. Propex performs internal Manufacturing Quality

Control (MQC) tests that have been accredited by the Geosynthetic Accreditation Institute – Laboratory

Accreditation Program (GAI-LAP). This product is NTPEP tested for AASHTO standards.

MARV

Propex Operating Company, LLC ∙ 4019 Industry Drive Chattanooga, TN 37416 ∙ ph 800 621 1273 ∙ ph 423 855 1466

ARMORMAX

, PYRAMAT

, LANDLOK

, X3

, PYRAWALL

, SCOURLOK

, GEOTEX

, PETROMAT

, PETROTAC

, REFLECTEX

, and GRIDPRO

TM

are registered trademarks of Propex Operating Company, LLC.

This publication should not be construed as engineering advice. While information contained in this publication is accurate to the best of our knowledge, Propex does not warrant its accuracy or completeness. The ultimate customer and user of the products should assume sole responsibility for the final determination of the suitability of the information and the products for the contemplated and actual use. The only warranty made by Propex for its products is set forth in our product data sheets for the product, or such other written warranty as may be agreed by Propex and individual customers. Propex specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from provision of samples, a course of dealing or usage of trade.

© 2019 Propex Operating Company, LLC

4. Contact your local Territory Business Manager (TBM) for custom widths and colors. Lead times may vary depending on customer requirements and volume requested.

1. The property values listed above are effective 12/17/2018 and are subject to change without notice.

2. Values shown are in weaker principal direction. Minimum average roll values (MARV) are calculated as the typical minus two standard deviations.

Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported. Values represent testing at time of manufacture.

3. Maximum average roll value.

MECHANICAL

ENDURANCE

HYDRAULIC

ROLL SIZES

2.3