Attachment 3-Technical Compliance Matrix.xlsx
XLSX spreadsheet 32 KB Posted
- Attached to
- 6 Passenger Commercial Van
- Solicitation number
- 47QSWC22Q0156
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Compliance-Fuel Tanker
| 47QSWC22Q0072 - Vocational Trucks | ||
| TECHNICAL COMPLIANCE MATRIX | ||
| CID Reference | SPECIFICATION / SALIENT CHARACTERISTICS | Solution meets -or- does not meet required specifications (Yes/No) |
| OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quote justified previous response) | COMMENTS |
(If proposing different specifications, provide a detailed explanation for how proposed specification meets or exceeds the Government's requirements.
| 1. Configuration CID 1 | |
| 1.1 | The vehicle shall be a Fuel Tanker Truck, 2021 model year or later, with no more than 250 miles (402 km) on the odometer when inspected |
| 1.2 | Tank shall have a capacity of at least 4,227 gallon (16,000 liter) with suitable expansion space. |
| 1.3 | The vehicle, fully loaded, shall be able to maintain a top speed of at least 60 mph (97 kph) on a level grade |
| 2. Equipment CID 2 | |
| 2.1 | The vehicle shall be provided with all standard equipment and the options specified herein |
| 2.2 | The vehicle shall be provided with two front and two rear frame-mounted tow hooks or eyes |
| 2.3 | The vehicle shall be provided with lockable toolbox(es) or secured stowage compartment(s) of sufficient volume to store all manufacturer's standard equipment and accessories, and those specified below. All locks for the toolbox(es) or compartment(s) shall be identically keyed. Two keys shall be provided. |
| 2.4 | The vehicle shall be provided with the standard tools required for simple operator level maintenance (wrench and socket set, screwdrivers, adjustable wrench, pliers, and hammer at a minimum). |
| 2.5 | The vehicle shall be provided with tire changing tools and a lifting jack, with a minimum capacity of ½ vehicle GVW |
| 2.6 | First aid kit and three hazard warning triangles shall be pro |
| 2.7 | The vehicle shall be provided with a tire inflating hose with quick-connect fittings on both ends,powered by vehicle compressed air system of sufficient length to inflate all tires on vehicle, and with a chuck and pressure gauge |
| 2.8 | The vehicle shall be provided with at least one ABC type fire extinguisher, mounted in the cab, minimum 4.4 pound (2 kg) capacity |
| 2.9 | Battery master disconnect switch shall be provided |
| 2.10, 2.10.1, 2.10.2 | Vehicle language requirements: All instructions, diagrams, and warning labels on the vehicle shall be in English and Vietnamese, or in universal symbols, A vehicle operator's manual shall be provided for every vehicle, written in English and Vietnamese |
| 3. Egnine CID 3 | |
| 3.1 | The vehicle shall be provided with a EURO 5 diesel engine |
| 3.2 | Engine brake shall be provided |
| 4. Chasis/Drivline CID 4 | |
| 4.1 | The chassis shall be a 6x4 or 6x2 configuration |
| 4.2 | A rear axle shall be equipped with a locking or limited slip differential |
| 5. Transmission CID 5 | |
| 5.1 | The vehicle may be equipped with either a manual, automated manual, or automatic transmission |
| 6. Steering CID 6 | |
| 6.1 | The vehicle shall be equipped with left-hand drive (LHD) steering |
| 7. Braking System CID 7 | |
| 7.1 | The vehicle shall have air brakes and ABS |
| 8. Wheel Assembly (tire & wheel) CID 8 | |
| 8.1 | The vehicle shall be provided with on/off road tires |
| 8.2, 8.2.1 | The vehicle shall be provided with a full-size spare wheel assembly with holder. Means shall be provided to assist with the loading and unloading of the spare tire (i.e. davit, winch or equivalent). |
| 8.3 | All tires shall be of the same size, load rating and tread design and all wheels shall be interchangeable, including the spare wheel assembly |
| 9. Electrical System CID 9 | |
| 9.1 | Battery master disconnect switch shall be provided |
| 10. Color CID 10 | |
| 10.1 | The exterior color (at a minimum the cab and tank) shall be White |
| 11. Cab CID 11 | |
| 11.1 | The vehicle shall have a two door cab, with seating for a driver and at least one passenger |
| 11.2 | All instrument gauges shall be in metric units |
| 11.3 | Air suspension seat for the driver |
| 11.4 | Air conditioning, heating, and defrosting systems shall be provided |
| 12. Tanker Equipment CID 12 | |
| 12.1 | Tank shall consist of a single compartment containing a minimum of two anti-surge baffles |
| 12.2 | Tank shall be constructed from either aluminum or stainless steel (304, 316 or equivalent) suitable for diesel fuel and gasoline |
| 12.3 | All tank filler openings and vents shall be protected against overturn damage |
| 12.4 | Tank shall have one lockable (by padlock) manhole a minimum of 20 inches (50 cm) in diameter, complete with vent |
| 12.5 | The tank shall be capable of being bottom-loaded at a rate not less than 600 gallons per minute (gpm) (2,271 liters per minute (l/min)). To provide bottom loading capability, the tank shall be furnished with, at a minimum, an automatic vent valve, a level-sensor controlled automatic flow control valve, and a drybreak bottom loading adapter with check valve. The system, including the automatic vent, shall be failsafe to prevent damage to the tank and components if the bottom loading system malfunctions or is operated incorrectly |
| 12.6 | Emergency shut-off controls for fuel loading and discharging operations shall be provided |
| 12.7 | All parts, including pump, piping, hoses, having contact with fuel shall be corrosion resistant and compatible with diesel fuel and gasoline |
| 12.8 | Upper tank access shall be provided by ladder, leading to a grating-type catwalk to manhole, both affixed to tank |
| 12.9 | The catwalk and ladder shall be provided with a non-slip surface |
| 12.10 | Upper tank access shall be drainable |
| 12.11 | Electrostatic discharge protection shall be provided for the chassis and refueling equipment, grounding line and reel at a minimum |
| 12.12 | Two fire extinguishers, type ABC shall be provided, and mounting brackets, minimum 20 pound (9 kg) capacity each |
| 12.13 | A PTO powered, self-priming pump shall be provided with a minimum discharge capacity of 160 gpm (600 l/min). |
| 12.14 | Tanker shall be capable of self-loading via the on-board pump at a rate of not less than 75 gpm (285 lpm). |
| 12.15 | Tanker shall be capable of fuel discharge (diesel and gasoline) via pressurized (pump) and gravity feed modes through the bulk delivery/self-loading hose |
| 12.16 | Pump and piping system shall include all piping, fittings, adapters, valves, vents, and pressure gages necessary to safely dispense and meter fuel through the bulk delivery/self-loading hose, in both pressurized and gravity feed modes |
| 12.17 | All tools required for fuel loading and dispensing operation and changing the fuel filter/water separator element(s) shall be provided |
| 12.18 | A flow diagram and basic operating and safety instructions shall be permanently affixed to the tank near the control valves |
| 12.19 | Flow meter shall be able to provide both a running total and a resettable individual use total for fuel distribution |
| 12.20 | Vapor recovery system including piping, connection, and vent shall be installed |
| 12.21 | Two 3 or 4-inch diameter non-collapsible hoses, minimum 10 feet (3 m) long each, for bulk delivery/self-loading operation with cam-locks on each end shall be provided. The hoses shall have an enclosed storage location on the tanker |
| 13. Corrosion Protection CID 13 | |
| 13.1 | The entire vehicle (where applicable) shall be provided with Carwell (www.carwell.com) or an equivalent type of protection (e.g. Coating, e-coat, etc.) to prevent corrosion and rust. The Carwell protection shall be applied post DCMA inspection but prior to shipment |
| 14. Leadtime | |
| Less than 365 days after receipt of order |
Compliance-Refrigerated
| 47QSWC22Q0072 - Vocational Trucks | ||
| TECHNICAL COMPLIANCE MATRIX | ||
| CID Reference | SPECIFICATION / SALIENT CHARACTERISTICS | Solution meets -or- does not meet required specifications (Yes/No) |
| OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quote justified previous response) | COMMENTS |
(If proposing different specifications, provide a detailed explanation for how proposed specification meets or exceeds the Government's requirements.
| 1. Configuration CID 1 | |
| 1.1 | Refrigerated 4x2 Truck, 2021 model year or later, with no more than 250 miles (402 km) on the odometer |
| 1.2 | The vehicle, fully loaded, shall be able to maintain a top speed of at least 60 mph (97 kph) on a level grade |
| 2. Equipment CID 2 | |
| 2.1 | All of the standard equipment typically found on a base 4x2 cargo truck of this type |
| 2.2 | Door locks and ignition identically keyed for all vehicles |
| 2.3 | Anti-sail mud flaps for the rear wheels |
| 2.4 | Lockable tool box(es) or secured stowage compartment(s) to store all manufacturer's standard equipment and accessories |
| 2.5 | All locks for tool box(es) or secured stowage compartment(s) identically keyed for all vehicles |
| 2.6 | Two keys provided with each vehicle |
| 2.7 | Standard tools required for simple operator level maintenance (wrench and socket set, screwdriver, adjustable wrench, pliers) |
| 2.8 | Tire changing tools and a lifting jack, with a minimum capacity of ½ of the Gross Vehicle Weight (GVW) |
| 2.9 | Air hose with fittings to inflate tires, powered by the vehicle's compressed air system |
| 2.10 | Chuck and pressure gauge |
| 2.11 | Hose with sufficient length to inflate all tires on the vehicle |
| 2.12-2.14 | Two 5 gallon (or 20 liter) jerry cans; One jerry can labeled "Potable Water Only" in Vietnamese and English & The other jerry can labeled "Diesel Fuel Only" in Vietnamese and English |
| 2.15 | Stowage space for the jerry cans on the vehicle in non-interfering location |
| 2.16 | Two frame-mounted tow hooks or eyes on the front and two at the rear of vehicle |
| 2.17 | Brushguard with integrated headlight protection, mounted in front of the grill |
| 2.18 | One ABC type fire extinguisher with mounting bracket, minimum 5.0 pound (2.2 kg) capacity, stored in the cab |
| 2.19 | Self-recovery winch: Mounted to front of vehicle, 12,000 lb (5,443 kg) minimum capacity (first layer), 80 ft (24.4 m) minimum cable length, 20% minimum cable safety factor, Equipped with a roller fairlead, Remote control to operate winch functions outside the vehicle |
| 2.20 | Language requirements: All instructions, diagrams, and warning labels shall be in both Vietnamese and English, or in universal symbols, and shall be permanently affixed to the vehicle, Fuel filler cap, or area near cap (easily visible to the users), shall be labeled with the type of fuel compatible with the vehicle in both Vietnamese and English, or in universal symbols, A vehicle operator’s manual and refrigeration operator’s manual shall be provided for every vehicle, written in both Vietnamese and English. |
| 3. Egnine CID 3 | |
| 3.1 | The vehicle shall be provided with a EURO 5 diesel engine |
| 3.2 | Exhaust brake shall be provided |
| 4. Chasis/Drivline CID 4 | |
| 4.1 | Vehicle shall be provided with a minimum 4x2 driveline |
| 4.2 | A rear axle shall be equipped with a locking or limited slip differential |
| 5. Transmission CID 5 | |
| 5.1 | Vehicle shall be provided with an automatic, manual, or automated manual transmission |
| 6. Steering CID 6 | |
| 6.1 | The vehicle shall be equipped with left-hand drive (LHD) steering |
| 7. Braking System CID 7 | |
| 7.1 | Vehicle shall be provided with: A service brake system with ABS, A parking brake |
| 8. Electrical System CID 8 | |
| 8.1 | Dual maintenance free batteries shall be provided |
| 8.2 | Exterior work lights shall be provided at the rear of the vehicle for nighttime loading and unloading operations |
| 9. Wheel Assembly (tire and wheel) CID 9 | |
| 9.1 | Vehicle shall be provided with tubeless on-off road radial tires |
| 9.2 | All tires shall be of the same size, load rating and tread design, and all wheel assemblies shall be interchangeable, including spare wheel assembly |
| 10. Cab CID 10 | |
| 10.1 | The cab shall be a two-door configuration with seating for the driver and passenger |
| 10.2 | Seatbelts shall be provided for both cab occupants |
| 10.3 | Air conditioning, heating, and defrosting systems shall be provided |
| 11. Color CID 11 | |
| 11.1 | The exterior color of the vehicle shall be white |
| 12. Insulated Cargo Body and Regrigerator System CID 12 | |
| 12.1 | The cargo body shall be a windowless, aluminum and enclosed structure with the following characteristics: Minimum internal volume of 565 ft3 (16 m3), Minimum internal height of 70 inches (1.78 m), Maximum external width of 90 inches (2.29 m) |
| 12.2 | Insulation shall be provided to allow the entire cargo body interior to cool for the temperatures listed below in 12.3 |
| 12.3 | The cargo body shall have a refrigeration system able to maintain the internal refrigerated temperature of 32°F (0°C) in 104°F (40°C) outside temperatures |
| 12.3.1 | Controls for the refrigeration system shall be located in the cab |
| 12.3.2 | A covered, environmentally protected, receptacle shall be provided to allow the entire refrigerated cargo body’s equipment to be powered by shoreline power (220 volt, 50 Hz). |
| 12.3.2.1 | An external cord, minimum 100 ft (30.5 m) shall be provided to connect the shoreline power to theA transfer device to switch from shoreline power and vehicle power shall be provided receptacle. |
| 12.3.2.2 | A transfer device to switch from shoreline power and vehicle power shall be provided |
| 12.4 | A non-slip floor inside the cargo body shall be provided |
| 12.5 | Cargo body shall be capable of carrying at least 6,000 lbs (2,727 kg). |
| 12.6 | Both side walls shall have two rows of E-track that run the full length of the side wall |
| 12.7 | Lighting shall be provided inside of the cargo body capable of illuminating the entire compartment |
| 12.8 | Vehicle shall be provided with dual, saloon style, full swing-open rear doors: Doors shall have a means to be held securely in the open position during loading and |
unloading operations, Rear doors shall be lockable by padlock. Padlock shall be provided, with two keys
| 12.9 | A rear plastic curtain shall be installed just inside the rear doors of the cargo body to help |
| 12.10 | At least two rear working lights shall be provided |
| 12.11 | Vehicle shall be provided with two rear surface-mounted grab handles on the cargo body to aid in ingress and regress |
| 12.12 | Vehicle shall be provided with a rear step bumper |
| 12.13 | A retractable underbody loading ramp shall be provided, with the following capabilities: Usable width of 24 inches (61 cm) minimum, Ramp angle not more than 20%, Non-slip surface, Minimum capacity of 1,000 lbs (454 kg), Securable by padlock, which is provided with two keys |
| 13. Corrosion Protection CID 13 | |
| 13.1 | The entire vehicle (where applicable) shall be provided with Carwell (www.carwell.com) or an equivalent type of protection (e.g. Coating, e-coat, etc.) to prevent corrosion and rust. The Carwell protection shall be applied post DCMA inspection but prior to shipment |
| 14. Leadtime | |
| Less than 365 days after receipt of order |
Compliance-Cargo Truck
| 47QSWC22Q0072 - Vocational Trucks | ||
| TECHNICAL COMPLIANCE MATRIX | ||
| CID Reference | SPECIFICATION / SALIENT CHARACTERISTICS | Solution meets -or- does not meet required specifications (Yes/No) |
| OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quote justified previous response) | COMMENTS |
(If proposing different specifications, provide a detailed explanation for how proposed specification meets or exceeds the Government's requirements.
| 1. Configuration CID 1 | |
| 1.1 | The vehicle shall be a 15-Ton Cargo Truck with a 6x4 or 6x2 chassis and a platform body suitable for hauling cargo |
| 1.2 | The vehicle shall be a 2021 model year or later |
| 1.3 | The vehicle shall have with no more than 250 miles (402 km) on the odometer when delivered |
| 2. Equipment CID 2 | |
| 2.1 | The vehicle shall be provided with all of the manufacturer's standard equipment for the model propose |
| 2.2 | The vehicle shall be provided with two front frame-mounted tow hooks or eyes |
| 2.3 | The vehicle shall be provided with lockable toolbox(es) or secured stowage compartment(s) of sufficient capacity to store all manufacturer's standard equipment and accessories, and those specified below. All locks for the toolbox(es) or compartment(s) shall be identically keyed |
| 2.4 | The vehicle shall be provided with the standard tools required for simple operator level maintenance (wrench and socket set, screwdrivers, adjustable wrench, pliers, and hammer at a minimum). |
| 2.5 | The vehicle shall be provided with tire changing tools and a lifting jack |
| 2.6 | First aid kit and three warning triangles shall be provided |
| 2.7 | The vehicle shall be provided with a tire inflating hose with quick-connect fittings on both ends, powered by vehicle compressed air system of sufficient length to inflate all tires on vehicle, and with chuck and pressure gauge |
| 2.8 | The vehicle shall be provided with at least one ABC type fire extinguisher located in the cab with mounting bracket, minimum 4.4 pound (2.0 kg) capacity |
| 2.9 | The vehicle shall be provided with a brush guard with integrated headlight protection |
| 2.10 | The rear wheels shall be provided with anti-sail mud flaps |
| 2.11 | The vehicle shall be provided with a rear pintle compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop inner diameter (I.D.) and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter |
| 12.12 | A 12 volt SAE J560 7 pin connector shall be provided for trailer electrical connection |
| 12.13 | The vehicle shall be equipped with a front-mounted, self-recovery winch |
| 12.14 | The winch shall be rated at minimum 10,000 lbs (4,536 kg) bare drum first layer |
| 12.15 | A roller fairlead shall be provided with the winch |
| 12.16 | A remote control shall be provided, which will allow the winch to be operated from a minimum distance of 12 ft (3.7 m) from the vehicle. |
| 12.17 | A snatch block shall be provided |
| 12.18 | Language requirements:All instruction, diagrams and warning labels shall be in English and Vietnamese, or in universal symbols, and shall be permanently affixed to the vehicle, Operator manuals shall be provided for every vehicle and written in English and Vietnamese |
| 3. Egnine CID 3 | |
| 3.1 | Vehicle shall be provided with an automatic, manual, or automated manual transmission |
| 4. Transmission CID 4 | |
| 4.1 | Vehicle shall be provided with a minimum 4x2 driveline |
| 5. Steering CID 5 | |
| 5.1 | Vehicle shall be provided with left-hand drive (LHD). |
| 6. Braking System CID 6 | |
| 6.1 | Vehicle shall be provided with glad-hands to accommodate trailer brake connections and shall be in accordance with SAE J318 |
| 7. Wheel Assembly (tire and wheel) CID 7 | |
| 7.1 | Vehicle shall be provided with on-off road rated tires with all-terrain tread |
| 7.2 | Vehicle shall be provided with a full-size spare wheel assembly with holder |
| 8. Electrical System CID 8 | |
| 8.1 | Vehicle shall be provided with the manufacturer’s highest rated available alternator and heaviest-duty maintenance-free batteries |
| 8.2 | Additional lighting shall be provided toward the rear of the vehicle for nighttime loading and unloading operations |
| 9. Cab CID 9 | |
| 9.1 | A 2-door cab with a rear window shall be provided |
| 9.2 | Air conditioning, heating and defrosting systems shall be provided |
| 9.3 | All instrument gauges in metric units |
| 10. Platform Body CID 10 | |
| 10.1 | The vehicle shall be provided with a platform body capable of transporting at least 15 tons (13,608 kg) of payload |
| 10.2 | The platform body shall have minimum dimensions of 24.3 ft (7.4 m) length by 7.68 ft (2.34 m) width |
| 10.3 | Full width, weld on style rectangular bulkhead with punched window shall be provided |
| 10.4 | The platform body shall have metal side and rear walls that are 15.75 inches (40 cm) in height |
| 10.5 | All side and rear walls shall be hinged such that they can be folded down. |
| 10.6 | The floor of the platform body shall be tread plate steel type, at least 1/8 inch (3.1 mm) thick |
| 10.7 | At least 8 swivel style tie-down rings shall be provided on the platform body floor |
| 10.8 | Rear steps shall be provided to gain access to platform body |
| 10.9 | Additional lighting shall be provided toward the rear of the vehicle for nighttime loading and unloading operations |
| 10.10 | The platform body shall have twist locks in the floor to secure one 20 foot ISO container |
| 11. Performance CID 11 | |
| 11.1 | On and off-road capabilities, 10% Off-road / 90% On-road expected use |
| 11.2 | The vehicle shall be capable of securely transporting 20 ft (6.1 m) containers over rough terrain |
| 11.3 | Truck fully loaded with 15 tons shall be capable of speeds of at least 50 mph (80 kph) on paved roads |
| 12. Color CID 12 | |
| 12.1 | The exterior color of the vehicle (including the cab, side and rear bed walls, and bulkhead) shall be White 37875, in accordance with FED-STD-595 or the closest commercial equivalent |
| 13. Corrosion Protection CID 13 | |
| 13.1 | The entire vehicle (where applicable) shall be provided with Carwell (www.carwell.com) or an equivalent type of protection (e.g. Coating, e-coat, etc.) to prevent corrosion and rust. The Carwell protection shall be applied post DCMA inspection but prior to shipment |
| 14. Leadtime | |
| Less than 365 days after receipt of order |
Compliance-Water Tanker
| 47QSWC22Q0156 - Commercial 6 Passenger Van | ||
| TECHNICAL COMPLIANCE MATRIX | ||
| CID Reference | SPECIFICATION / SALIENT CHARACTERISTICS | Solution meets -or- does not meet required specifications (Yes/No) |
| OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quote justified previous response) | COMMENTS |
(If proposing different specifications, provide a detailed explanation for how proposed specification meets or exceeds the Government's requirements.
| THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES: | |
| 1. Configuration | |
| 1.1 | The vehicle shall be an All-Wheel Drive (AWD) Passenger Van. |
| 1.2 | The vehicle shall be a 2022 model year or later, with at most 300 miles (483 km) on the odometer. |
| 1.3 | The van shall have seating for driver, one front passenger, and second and third row seating for at least four additional passengers. |
| 1.3.1 | The second and third row seating shall be removable. |
| 1.3.2 | The cargo area with the second row seating removed shall have at least a 140 cubic feet (3.96 cubic meters) load area volume. |
| 1.4 | No partition shall be provided between front row seating and the rest of vehicle interior. |
| 1.5 | The vehicle door configuration shall be as follows: |
| 1.5.1 | Two front, hinged doors |
| 1.5.2 | At least one side sliding door |
| 1.5.3 | Split, hinged or tailgate style rear door(s) |
| 1.6 | Manuals shall be provided, written in English, including: |
| 1.6.1 | An Owner’s manual |
| 1.6.2 | A Service manual |
| 1.6.3 | A Parts manual |
| 2. Safety | |
| 2.1 | The vehicle shall meet all applicable Economic Commission for Europe (ECE) and European Economic Community (EEC) safety standards. |
| 3. Equipment | |
| 3.1 | The vehicle shall be equipped with all the standard equipment including: |
| 3.1.1 | Air conditioning |
| 3.1.2 | Antilock Brakes System (ABS) |
| 3.2 | The vehicle instrument gauges shall be in metric units. |
| 3.3 | An ABC type fire extinguisher, minimum 2.2 lb (1.0 kg) capacity, with mounting bracket shall be provided. |
| 3.4 | All vehicle windows behind the front seats shall be tinted to the darkest that European standards will allow. |
| 3.5 | First aid kit shall be provided that contains a tape roll, aspirin, bandages, a solar blanket, antibiotic cream, burn cream, gauze pads, vinyl gloves, scissors, sterile pad, antiseptic towelettes, tweezers, and storage bag at a minimum. |
| 3.6 | The vehicle shall be equipped with a full-size spare with tire changing tools including: |
| 3.6.1 | A lifting jack |
| 3.6.2 | A lug wrench |
| 4. Engine | |
| 4.1 | The vehicle shall be equipped with at least a diesel Euro 5 engine, able to operate longterm on fuel available Bosnia and Herzegovina. |
| 5. Steering | |
| 5.1 | The vehicle shall be left hand drive (LHD). |
| 6. Transmission | |
| 6.1 | The vehicle shall be provided with manual or automatic transmission. |
| 7. Exterior Color | |
| 7.1 | The exterior color of the vehicle shall be olive green or OEM equivalent. |
| 8. Radio Frequency Identification (RFID) Tags | |
| 8.1 | Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as Savi ST-654-041. |
| 8.2 | The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container. |
| 8.3 | The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method. |
| 8.4 | The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 "Commodity Item Database Format" with the following clarifications: |
| 8.4.1 | The "document field" titled "DOCUMENT" shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency. |
| 8.4.2 | The "MISC1" field shall be the item serial number, if available. |
| 8.4.3 | The "MISC2" field shall be used for user comments (e.g. contract number). |
File details come from the government source that posted it. Updated .