Attachment 3-FA302222Q0328 Provisions-Clauses.pdf

Attachment 3 FA302222Q0328

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE

YEAR-

MO

SECTION

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

252.204-7006 Billing Instructions. 2005-10 SEC G

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support.

252.204-7018 Prohibition on the Acquisition of Covered Defense

252.232-7011 Payments in Support of Emergencies and Contingency Operations.

252.232-7017 Accelerating Payments to Small Business Subcontractors- Prohibition on Fees and Consideration.

252.237-7010 Prohibition on Interrogation of Detainees by Contractor

52.212-1 Instructions to Offerors-Commercial Products and Commercial

Services.

52.212-4 Contract Terms and Conditions-Commercial Products and

SOLICITATION NUMBER DOCUMENT NUMBER

Telecommunications Equipment or Services.

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2022-03 SEC L 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. 2022-03 SEC I 252.204-7021 Cybersecurity Maturity Model Certification Requirement. 2020-11 SEC I

252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations.

2019-09 SEC L

252.215-7007 Notice of Intent to Resolicit. 2012-06 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2013-06 SEC I 252.225-7001 Buy American and Balance of Payments Program. 2022-03 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I 252.225-7012 Preference for Certain Domestic Commodities. 2022-04 SEC I

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12 SEC G

252.232-7010 Levies on Contract Payments. 2006-12 SEC I

Personnel.

252.244-7000 Subcontracts for Commercial Items. 2021-01 SEC I 52.204-13 System for Award Management Maintenance. 2018-10 SEC I 52.204-16 Commercial and Government Entity Code Reporting. 2020-08 SEC L 52.204-18 Commercial and Government Entity Code Maintenance. 2020-08 SEC I 52.204-22 Alternative Line Item Proposal. 2017-01 SEC L 52.204-7 System for Award Management. 2018-10 SEC K

52.223-19

Commercial Services.

Compliance with Environmental Management Systems.

2011-05

SEC I

52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 SEC I

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2021-11 SEC I

52.237-1 Site Visit. 1984-04 SEC L 52.222-41 Service Contract Labor Standards. 2018-08 SEC I

2016-10 SEC L

2019-12 SEC I

2016-05 SEC I

2021-01 SEC I

2013-05 SEC I

2020-04 SEC I

2013-06 SEC I

2011-09 SEC I

2011-11 SEC K

2021-11 SEC L

2021-11 SEC I

CLAUSES IN FULL TEXT

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE

YEAR-

MO

CLAUSE TEXT

ADDENDUM TO FAR 52.212-1 INSTRUCTION TO OFFERORS-COMMERCIAL ITEMS (Nov 2021)

Paragraph (b) is hereby replaced with the following:

The Government will award a contract to the responsible offeror whose proposal conforms to the solicitation and is the most advantageous to the Government, price and other factors considered. Factors being utilized to evaluate proposals are:

1. Price: Complete Price Schedule on Attachment 1 (Combined Synopsis-Solicitation)

2. Technical Acceptability:

Submit technical approach IAW the Statement of Objectives (SOO) (DO NOT restate the SOO. This is not acceptable)

Submit three pages or less for technical approach.

Information regarding submission of Price and Technical Approach:

Email correspondence/submission of Price and Technical Approach must be submitted to jon.bogaard.1@us.af.mil before deadline stated on Attachment 1 (Combined Synopsis- Solicitation)

52.212-2 Evaluation-Commercial Products and Commercial Services 2021-11

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price and Technical Acceptability. Technical Acceptability will be based on the Offeror’s conformance to the Statement of Objectives and solicitation. The Government reserves the right to award without discussion.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

252.239-7002 Access. 1991-12

As prescribed in 239.7411(a), use the following clause:

ACCESS (DEC 1991)

(a) Subject to military security regulations, the Government shall permit the Contractor access at all reasonable times to Contractor furnished facilities. However, if the Government is unable to permit access, the Government at its own risk and expense shall maintain these facilities and the Contractor shall not be responsible for the service involving any of these facilities during the period of nonaccess, unless the service failure results from the Contractor's fault or negligence.

(b) During periods when the Government does not permit Contractor access, the Government will reimburse the Contractor at mutually acceptable rates for the loss of or damage to the equipment due to the fault or negligence of the Government. Failure to agree shall be a dispute concerning a question of fact within the meaning of the Disputes clause of this contract.

(End of clause)

252.239-7004 Orders for Facilities and Services. 2019-09

As prescribed in 239.7411(a), use the following clause:

ORDERS FOR FACILITIES AND SERVICES (SEP 2019)

(a) Definitions. As used in this clause-

"Governmental regulatory body" means the Federal Communications Commission, any statewide regulatory body, or any body with less than statewide jurisdiction when operating under the state authority. Regulatory bodies whose decisions are not subject to judicial appeal and regulatory bodies which regulate a company owned by the same entity that creates the regulatory body are not governmental regulatory bodies.

(b) The Contractor shall acknowledge a communication service authorization or other type order for supplies and facilities by-

(1) Commencing performance after receipt of an order; or

(2) Written acceptance by a duly authorized representative.

(c) The Contractor shall furnish the services and facilities under this agreement/contract in accordance with all applicable tariffs, rates, charges, regulations, requirements, terms, and conditions of-

(1) Service and facilities furnished or offered by the Contractor to the general public or the

Contractor's subscribers; or

(2) Service as lawfully established by a governmental regulatory body.

(d) The Government will not prepay for services.

(e) For nontariffed services, the Contractor shall charge the Government at the lowest rate and under the most favorable terms and conditions for similar service and facilities offered to any other customer.

(f) Recurring charges for services and facilities shall, in each case, start with the satisfactory beginning of service or provision of facilities or equipment and are payable monthly in arrears.

(g) Expediting charges are costs necessary to get services earlier than normal. Examples are overtime pay or special shipment. When authorized, expediting charges shall be the additional costs incurred by the Contractor and the subcontractor. The Government shall pay expediting charges only when-

(1) They are provided for in the tariff established by a governmental regulatory body; or

(2) They are authorized in a communication service authorization or other contractual document.

(h) When services normally provided are technically unacceptable and the development, fabrication, or manufacture of special equipment is required, the Government may-

(1) Provide the equipment; or

(2) Direct the Contractor to acquire the equipment or facilities. If the Contractor acquires the equipment or facilities, the acquisition shall be competitive, if practicable.

(i) If at any time the Government defers or changes its orders for any of the services but does not cancel or terminate them, the amount paid or payable to the Contractor for the services deferred or modified shall be equitably adjusted under applicable tariffs filed by the Contractor with the regulatory commission in effect at the time of deferral or change. If no tariffs are in effect, the Government and the Contractor shall equitably adjust the rates by mutual agreement. Failure to agree on any adjustment shall be a dispute concerning a question of fact within the meaning of the Disputes clause of this contract.

252.239-7007 Cancellation or Termination of Orders. 2019-09

As prescribed in 239.7411(a), use the following clause:

CANCELLATION OR TERMINATION OF ORDERS (SEP 2019)

(a) Definitions.

"Actual nonrecoverable costs" means the installed costs of the facilities and equipment, less cost of reusable materials, and less net salvage value.

"Basic cancellation liability" means the actual nonrecoverable cost, which the Government shall reimburse the Contractor at the time services are cancelled.

"Basic termination liability" means the nonrecoverable cost amortized in equal monthly increments throughout the liability period.

"Installed costs" means the actual cost of equipment and materials specifically provided or used, plus the actual cost of installing (including engineering, labor, supervision, transportation, rights-of-way, and any other items which are chargeable to the capital accounts of the Contractor), less any costs the government may have directly reimbursed the Contractor under the Special Construction and Equipment Charges clause of this agreement/contract.

"Net salvage value" means the salvage value less the cost of removal.

(b) If the Government cancels any of the services ordered under this agreement/contract, before the services are made available to the Government, or terminates any of these services after they are made available to the Government, the Government will reimburse the Contractor for the actual nonrecoverable costs the Contractor has reasonably incurred in providing facilities and equipment for which the Contractor has no foreseeable reuse. The Government will not reimburse the Contractor for any actual nonrecoverable costs incurred after notice of award, but prior to execution of the order.

(c) When feasible, the Contractor shall reuse cancelled or terminated facilities or equipment to minimize the charges to the Government.

(d) If at any time the Government requires that telecommunications facilities or equipment be relocated within the Contractor's service area, the Government will have the option of paying the costs of relocating the facilities or equipment in lieu of paying any termination or cancellation charge under this clause. The basic cancellation liability or basic termination liability applicable to the facilities or equipment in their former location shall continue to apply to the facilities and equipment in their new location. Monthly recurring charges shall continue to be paid during the period.

(e) When there is another requirement or foreseeable reuse in place of cancelled or terminated facilities or equipment, no charge shall apply and the basic cancellation liability or basic termination liability shall be appropriately reduced. When feasible, the Contractor shall promptly reuse discontinued channels or facilities, including equipment for which the Government is obligated to pay a minimum service charge.

(f) The amount of the Government's liability upon cancellation or termination of any of the services ordered under this agreement/contract will be determined under applicable tariffs governing cancellation and termination charges which-

(1) Are filed by the Contractor with a governmental regulatory body, as defined in the Rates, Charges, and Services clause of this agreement/contract;

(2) Are in effect on the date of termination; and

(3) Provide specific cancellation or termination charges for the facilities and equipment involved or show how to determine the charges.

(g) The amount of the Government's liability upon cancellation or termination of any of the services ordered under this agreement/contract, which are not subject to a governmental regulatory body, will be determined under a mutually agreed schedule in the communication services authorization (CSA) or other contractual document.

(h) If no applicable tariffs are in effect on the date of cancellation or termination or set forth in the applicable CSA or other contractual document, the Government's liability will be determined under the following settlement procedures-

(1) The Contractor agrees to provide the Contracting Officer, in such reasonable detail as the

Contracting Officer may require, inventory schedules covering all items of property or facilities in the Contractor's possession, the cost of which is included in the Basic Cancellation or Termination Liability for which the Contractor has no foreseeable reuse.

(2) The Contractor shall use its best efforts to sell property or facilities when the Contractor has no foreseeable reuse or when the Government has not exercised its option to take title under the Title to Telecommunications Facilities and Equipment clause of this agreement/contract. The Contractor shall apply any proceeds of the sale to reduce any payments by the Government to the Contractor under a cancellation or termination settlement.

(3) The Contractor shall record actual nonrecoverable costs under established accounting procedures prescribed by the cognizant governmental regulatory authority or, if no such procedures have been prescribed, under generally accepted accounting procedures applicable to the provision of telecommunication services for public use.

(4) The net salvage value shall be deducted from the Contractor's installed cost. In determining net salvage value, the Contractor shall consider the foreseeable reuse of the facilities and equipment by the Contractor. The Contractor shall make allowance for the cost of dismantling, removal, reconditioning, and disposal of the facilities and equipment when necessary either for the sale of facilities or their reuse by the Contractor in another location.

(5) Upon termination of services, the Government will reimburse the Contractor for the nonrecoverable cost less such costs amortized to the date services are terminated and establish the liability period as mutually agreed to but not to exceed ten years. In the case of either a cancellation or a termination, the Government's presumed maximum liability will be capped by the unpaid non-recurring charges and the monthly recurring charges set out in the contract/agreement. The presumed maximum liability for monthly recurring charges shall be capped at monthly recurring charges for the minimum service period and any required notice period.

(6) When the basic cancellation liability or basic termination liability established by the CSA or other contractual document is based on estimated costs, the Contractor agrees to settle on the basis of actual cost at the time of cancellation or termination.

(7) The Contractor agrees that, if after settlement but within the termination liability period of the services, should the Contractor make reuse of equipment or facilities which were treated as nonreusable or nonsalvable in the settlement, the Contractor shall reimburse the Government for the value of the equipment or facilities.

(8) The Contractor agrees to exclude-

(i) Any costs which are not included in determining cancellation and termination charges under the Contractor's standard practices or procedures; and

(ii) Charges not ordinarily made by the Contractor for similar facilities or equipment, furnished under similar circumstances.

(i) The Government may, under such terms and conditions as it may prescribe, make partial payments and payments on account against costs incurred by the Contractor in connection with the cancelled or terminated portion of this agreement/contract. The Government may make these payments if the Contracting Officer determines that the total of the payments is within the amount the Contractor is entitled. If the total of the payments is in excess of the amount finally agreed or determined to be due under this clause, the Contractor shall pay the excess to the Government upon demand.

(j) Failure to agree shall be a dispute concerning a question of fact within the meaning of the

Disputes clause.

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

2021-05

As prescribed in 204.2105(b), use the following provision:

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) Definitions. "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

252.211-7003 Item Unique Identification and Valuation. 2022-03

As prescribed in 211.274-6(a)(1), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2022)

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.

The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4)(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Identification Number); and

Use a DoD recognized unique identification equivalent (e.g. Vehicle

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site /uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

252.232-7006 Wide Area WorkFlow Payment Instructions. 2018-12

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

2in1

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2in1

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) [Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

F87700

Issue By DoDAAC

FA3022

Admin DoDAAC

FA3022

Inspect By DoDAAC

F1N3C3

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

N/A

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.247-7023 Transportation of Supplies by Sea. 2019-02

Basic. As prescribed in 247.574(b) and (b)(1), use the following clause:

TRANSPORTATION OF SUPPLIES BY SEA-BASIC (FEB 2019)

"Components" means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

"Department of Defense" (DoD) means the Army, Navy, Air Force, Marine Corps, and defense agencies.

"Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the DoD at the time of transportation by sea.

(i) An item is clearly identifiable for eventual use by the DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

(ii) "Supplies" includes (but is not limited to) public works; buildings and facilities;

ships; floating equipment and vessels of every character, type, and description, with parts, subassemblies, accessories, and equipment; machine tools; material; equipment; stores of all kinds; end items; construction materials; and components of the foregoing.

"U.S.-flag vessel" means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.

(b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if-

(i) This contract is a construction contract; or

(ii) The supplies being transported are-

(A) Noncommercial items; or

(B) Commercial items that-

(1) The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it subcontracts for f.o.b.

destination shipment);

(2) Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or

(3) Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(c) The Contractor and its subcontractors may request that the Contracting Officer authorize shipment in foreign-flag vessels, or designate available U.S.-flag vessels, if the Contractor or a subcontractor believes that-

(1) U.S.-flag vessels are not available for timely shipment;

(2) The freight charges are inordinately excessive or unreasonable; or

(3) Freight charges are higher than charges to private persons for transportation of like goods.

(d) The Contractor must submit any request for use of foreign-flag vessels in writing to the

Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The

Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, but the Contracting Officer's failure to grant approvals to meet the shipper's sailing date will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum-

(1) Type, weight, and cube of cargo;

(2) Required shipping date;

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of telephone notes, telegraphic and facsimile message or letters will be sufficient for this purpose.

(e) The Contractor shall, within 30 days after each shipment covered by this clause, provide the

Contracting Officer and the Maritime Administration, Office of Cargo Preference, U.S. Department of Transportation, 400 Seventh Street SW, Washington, DC 20590, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of steamship company.

(f) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief-

(1) No ocean transportation was used in the performance of this contract;

(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;

(3) Ocean transportation was used, and the Contractor had the written consent of the

Contracting Officer for all foreign-flag ocean transportation; or

(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of the Contracting Officer. The Contractor shall describe these shipments in the following format:

ITEM DESCRIPTION CONTRACT LINE ITEMS

QUANTITY

TOTAL

(g) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use.

(h) If the Contractor indicated in response to the solicitation provision, Representation of Extent of Transportation by Sea, that it did not anticipate transporting by sea any supplies; however, after the award of this contract, the Contractor learns that supplies will be transported by sea, the Contractor shall-

(1) Notify the Contracting Officer of that fact; and

(2) Comply with all the terms and conditions of this clause.

(i) In the award of subcontracts, for the types of supplies described in paragraph (b)(2) of this clause, including subcontracts for commercial items, the Contractor shall flow down the requirements of this clause as follows:

(1) The Contractor shall insert the substance of this clause, including this paragraph (i), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

(2) The Contractor shall insert the substance of paragraphs (a) through (e) of this clause, and this paragraph (i), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. 2021-11

As prescribed in 4.2105(a), insert the following provision:

Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to-

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.