Attachment_3_-_CARB_Gravimetric_Analysis_Requirements.pdf

State of California Bid Specifications

6830-BS-0215676-2RevA Contract

1-25-68-01D Attachment 3 ______________________________________________________________________

6/17/2025

Gravimetric Analysis Requirements for California Air Resources Board Primary Gas Standards

1) Scope/Requirements:

The purpose of this procedure is to define the requirements for the California Air Resources Board (CARB) primary gas standards. Gravimetric certification for CARB purposes is defined as adding a carefully measured weight of component as to an evacuated cylinder, followed by the addition of a carefully measured weight of balance gas.

The two (2) weights are converted by appropriate calculations into molar volumes and then given the appropriate gas concentration ratio in units of parts-per-million (ppm).

A sample example is as follows.

Example: Component Gas: 2000 ppm CO, Balance Gas: N2

1. Establish tare weight of cylinder (within + 0.05 grams).

2. Added weight of CO (component gas) = 13.573 g (within + 0.05 grams).

3. Added wt. of N2 (balance gas) = 6617.10 g.

4. Calculated molar quantities.

13.573 g-CO = 0.4846 moles for CO

28.01 g/mole

6617.10 g-N2 = 236.241 moles for N2

28.01 g/mole

Total Moles = 0.4846 + 236.241= 236.73 moles

5. Calculated Concentration (ppm) based on molar quantities.

0.4846 moles CO x 106 = 2051.2 ppm CO (mole/mole)

236.73 moles (Total)

Accuracy (± %)

100 x (twice total weighing error) = 100 x 2 x 0.05 = ± 0.74% (weight of component gas) 13.573

State of California 6830-BS-0215676-2RevA Bid Specifications Event ID 0000033449

Attachment 5

Page 2 of 3 6/17/2025

Mixture Accuracy

The accuracy of the mixture shall be within ± 1% of the calculated value including all weighing tolerances.

Scale Capacity and Accuracy

The scale used to measure the gaseous components, and the treated aluminum and steel cylinders shall be capable of weighing to within ± 0.05 grams, including all hysteresis and readability errors.

Accuracy of the scale must be traceable to the U.S. National Institute of Science and Technology (NIST). The date of the last certification must be included in the data submitted. In addition, the actual accuracy must be included with the analysis.

Balance Gases

The balance gas shall be as specified in Pricing Worksheet.

Component Gas

Component gas purity shall be stated in the analysis. In order to guarantee a ± 1% mixture accuracy, it will be necessary to use a diluted component gas in the preparation of gas mixtures below approximately 2000 ppm. If the component gas is a diluted mixture, it must also have a traceable gravimetric analysis consistent with this procedure.

The final product delivered shall be accompanied by a certificate of analysis of the contents.

Certification

All gravimetric mixtures to be analyzed against an existing gravimetric prior to certification. For zero air and zero nitrogen, the impurities must be verified against analytical standards traceable to NIST by weight and/or analysis. All primary standard gases mixtures must be traceable to NIST weights and/or NIST gas mixture reference materials within 1%, including all measurement tolerances.

State of California 6830-BS-0215676-2RevA Bid Specifications Event ID 0000033449

Attachment 5

Page 3 of 3 6/17/2025

Blend Tolerance Primary gases shall meet the blend tolerances below. If they do not meet the necessary criteria, they will be returned to the contractor.

Target

Concentration Blend Tolerance Analytical

Uncertainty Required

Gas/Bal Gas Range Value Span Gas Conc. Tolerance

+/- Lower Conc. Limit Upper Conc. Limit +/-

CH4/Argon 5% 5% 5% 4.75 5.25 2%

CO2/N2 40% 40.00% 10% 36.00% 44.00% 2%

NH3/N2 1,500ppm 1,425ppm 5% 1353.75 1496.25 1%

10% 10% 5% 9.50% 10.50% 1%

Accessibility Report

Filename:

6830-BS-0215676-2RevA_CARBGrav6-17-25.pdf

Report created by:

Organization:

[Enter personal and organization information through the Preferences > Identity dialog.]

Summary

The checker found no problems in this document.

Needs manual check: 2

Passed manually: 0

Failed manually: 0

Skipped: 0

Passed: 30

Failed: 0

Detailed Report

Document

Rule Name Status Description

Accessibility permission flag Passed Accessibility permission flag must be set

Image-only PDF Passed Document is not image-only PDF

Tagged PDF Passed Document is tagged PDF

Logical Reading Order Needs manual check Document structure provides a logical reading order

Primary language Passed Text language is specified

Title Passed Document title is showing in title bar

Bookmarks Passed Bookmarks are present in large documents

Color contrast Needs manual check Document has appropriate color contrast

Page Content

Rule Name Status Description

Tagged content Passed All page content is tagged

Tagged annotations Passed All annotations are tagged

Tab order Passed Tab order is consistent with structure order

Character encoding Passed Reliable character encoding is provided

Tagged multimedia Passed All multimedia objects are tagged

Screen flicker Passed Page will not cause screen flicker

Scripts Passed No inaccessible scripts

Timed responses Passed Page does not require timed responses

Navigation links Passed Navigation links are not repetitive

Forms

Rule Name Status Description

Tagged form fields Passed All form fields are tagged

Field descriptions Passed All form fields have description

Alternate Text

Rule Name Status Description

Figures alternate text Passed Figures require alternate text

Nested alternate text Passed Alternate text that will never be read

Associated with content Passed Alternate text must be associated with some content

Hides annotation Passed Alternate text should not hide annotation

Other elements alternate text Passed Other elements that require alternate text

Tables

Rule Name Status Description

Rows Passed TR must be a child of Table, THead, TBody, or TFoot

TH and TD Passed TH and TD must be children of TR

Headers Passed Tables should have headers

Regularity Passed Tables must contain the same number of columns in each row and rows in each column

Summary Passed Tables must have a summary

Lists

Rule Name Status Description

List items Passed LI must be a child of L

Lbl and LBody Passed Lbl and LBody must be children of LI

Headings

Rule Name Status Description

Appropriate nesting Passed Appropriate nesting

Back to Top