Attachment 2- 47QSWC22Q0013 - Technical Compliance Matrix and Pricing Worksheet_20211027.xlsx
XLSX spreadsheet 17 KB Posted
- Attached to
- Industrial Shredder
- Solicitation number
- 47QSWC22Q0013
- Issued by
-
GSA Federal Acquisition Service
About this file
This document includes a request for quote from the General Services Administration for an industrial shredder to be delivered to and installed at a Marine Corps Logistics Command warehouse. Offerors must provide pricing for the shredder, delivery, and installation by December 3, 2021. The shredder must be able to shred various materials up to two inches thick including copper, brass, stainless steel, steel, aluminum, rubber and wood. It must have a feed chamber opening of 60" by 40" and discharge opening of 60" by 40", along with other specified technical requirements. The award will be a firm-fixed-price purchase order for the industrial shredder, delivery, and installation, with a period of performance of 180 days for delivery after order receipt.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QandA Amendment 1.xlsx | XLSX spreadsheet | |
| Industrial Shredder Layout_15JUL21.pdf | ||
| Attachment 1_47QSWC22Q0013_SF18-Industrial Shredder_ 20211103.pdf | ||
| RFQ MDMC Industrial Shredder_Updated 20211103.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Section 1-Technical Compliance
| 47QSWC22Q0013 - MDMC Industrial Shredder | |||
| Attachment 2: Section 1 - TECHNICAL COMPLIANCE MATRIX | |||
| Offeror to complete responses within the blue fields | |||
| SPECIFICATION / SALIENT CHARACTERISTICS | OFFEROR'S SPECIFICATION / SALIENT CHARACTERISTIC (Select from Drop Down if proposed solution meets, does not meet, or exceeds required specifications) | OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quotel that meets or exceeds required specifications) | COMMENTS (If proposing different specifications, provide a detailed explanation for how proposed speciifcation lacks or exceeds the Government's requirements. |
| INDUSTRIAL SHREDDER | |||
| MS-6040 industrial shredder specifications or equivalent: |
• Feed Chamber Opening: 60” x 40”
• Discharge Opening: 60” x 40”
• Bearings: Head End Gear Box: Timken Cup and Cone
• Bearings: Tail End: Rexnord or SKF Tapered Roller
• Drive / Driven Shafts: 6 ½” Hexagonal Shafting
• Chamber Plate, Head End: A-36 Hard Surface Welded
• Chamber Plate, Tail End: A-36 No Hard Surface Welding (Optional)
• Infeed Hopper: Standard Open Top
• Structural Base: Heavy Structural I-Beam
• Structural Legs: I-Beam – 54” Clearance to Ground
• Knife Size: 2” Wide
• Knife Hooks: 2 Hook or as Applicable
• Knife Material: Astralloy
• Knife Diameter: 22”
• Knife Program: 1+1+1
• Number of Knives: 32
• Drive Type: V-Belt / Cushioned Drive System
• Reducer: Dodge
• Motor(s): Baldor: 400 HP Total Drive Power
• Maximum Dimensions: See attached layout; 16' W x 26' L x 10' H
| • Must be able to shred: copper, brass, stainless steel, steel, aluminum, rubber, and wood at thicknesses up to 2 inches | MEETS | |
| In-feed Conveyor System: |
• Conveyor Length: 22 Feet
• Conveyor Belt Width: 60” Effective
• Belt Type: Rough Top
• Belt Speed: 45 FPM
• Conveyor Angle: 25 Degrees
• Motor Mount: Top / Side
• Side Rails: 12” Minimum
• Bottom Pans Included
• Support: Included
• Motor HP: 1.5
| • Pulley Diameter: 8 | DOES NOT MEET | |
| Control Panel: |
• Enclosure: Nema 4X; Saginaw
• Sub Pan; Saginaw
• Operator Station, 1 Hole with E-stop, 22mm
• Cutler Hammer Main Breaker / Nema 4X thru door operator
• Starter: IEC reversing starter – Main Motor
• Starter: IEC non-reversing starter – Secondary Motor
• Starter: IEC non-reversing starter – Conveyor Motor
• PLC: MicroLogix 1200 PLC, 14 DC inputs, 5 relay out 5 FET out
• Analog I/O Module, 2 inputs and 2 outputs
• HMI, PanelView 550
• Proface HMI
• E-Stop push button, 22mm
• Illuminated Control Power Start push button, 22mm
• Phoenix Terminal Blocks
• Panduit Wireway
• Cutler Hammer, 500 va Control Transformer / fuses
• NK Technologies Current Transformer
• 24 vdc power supply
• Omron, Safety Rated Mini Contactor
• Duplex Receptacle with 1.5 amp single pole circuit breaker
• Remote E-stop station
• Impulse Proximity Sensor
| • Programming and Interfacing of Conveyor | EXCEEDS | |
| Equipment Installation: It shall be the responsibility of the contractor to provide qualified personnel or work with local contractors who know all the mechanical and electrical codes in their area to assist the contractor to accomplish installation. | ||
| Installation, supervision, field services and start-up shall be the responsibility of the contractor's certified technician. | ||
| Equipment shall be accepted subsequent to installation, only after start-up procedures demonstrate the system functions as intended with no malfunctions, defects and or discrepancies noted. | ||
| WARRANTY: Unless otherwise stated in the Company’s proposal, the Company warrants the equipment pursuant to the contractual conditions for a period of one year (single shift operation; maximum 2080 hrs per year) from date of start-up or 18 months from date of shipment, whichever occurs first, to the extent that the Company will replace any defective material caused by faulty design, workmanship or material furnished by the Company. | ||
| Delivery/installation address is: |
Commanding Officer (B884) Marine Corps Logistics Command Whse 405, West End Yermo, CA 92398
| Delivery timeframe: 180 days (6 months) after receipt of order. |
| Delivery shall be FOB destination. |
Note: Any deviation from the above described equipment, characteristics and requested delivery and installation shall be noted in the offeror’s Technical Discussion and explanation provided for how it compares to the requested brand name or equal equipment, specifications and delivery as well as detailed descriptions of any added value or benefit to the Government.
Section 2-Pricing Worksheet
| 47QSWC22Q0013 - MDMC Industrial Shredder | ||
| ATTACHMENT 2: Section 2 - PRICING WORKSHEET | ||
| Offeror to complete responses within the blue fields | ||
| Description | Total Price | Delivery ARO |
| INDUSTRIAL SHREDDER, to include delivery and installation | $0.00 | |
| Total Proposed Price | $0.00 | |
| Please complete this form and include in quote |
File details come from the government source that posted it. Updated .