ATTACHMENT 2- 2391 RFQ Provisions and Clauses.docx

Atomic Clocks for Ensemble Time Scales NB688000-26-02391

ATTACHMENT 3- APPLICABLE PROVISIONS AND CLAUSES

FAR 52.212-4, CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES.

The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items Commercial Products and Commercial Services (DEVIATION JAN 2026), applies to this acquisition.

REVOLUTIONARY FAR OVERHAUL (RFO) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE.

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

FAR Overhaul (DEVIATIONS JAN 2026): https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

Commerce Acquisition Regulation (CAR): https://www.ecfr.gov/current/title-48/chapter-13

(End of Provision)

RFO 52.252-2 CLAUSES INCORPORATED BY REFERENCE.

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR Overhaul (DEVIATIONS JAN 2026): https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

CAR: https://www.ecfr.gov/current/title-48/chapter-13

(End of Clause)

RFO 52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS.

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any Commerce Acquisition Regulation (48 CFR Chapter 13) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

RFO 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES.

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Commerce Acquisition Regulation (48 CFR Chapter 13) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

PROVISIONS & CLAUSES INCORPORATED BY REFERENCE

PROVISIONS:

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (Sept 2024) 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation. (DEVIATION JAN 2026) 52.204-5 Women-Owned Business (Other than Small Business) (Oct 2014) 52.204-7 System For Award Management (DEVIATION JAN 2026) 52.209-5 Certification Regarding Responsibility Matters (DEVIATION JAN 2026) 52.212-1 Instructions To Offerors--Commercial Products And Commercial Services (DEVIATION JAN 2026) 52.240-90, Security Prohibitions and Exclusions Representations and Certifications (DEVIATION JAN 2026)

CLAUSES:

52.203-6 ALT I, Restrictions on Subcontractor Sales to the Government (Nov 2021) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) 52.203-12 Limitation on Payments to Influence Certain Federal Transactions (Jun 2020) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.204-13 System For Award Management Maintenance (Deviation Jan 2026) 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded (DEVIATION JAN 2026) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (DEVIATION JAN 2026) 52.219-28, Post-award Small Business Program Representation (DEVIATION JAN 2026) 52.222-3, Convict Labor (Jun 2003) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (DEVIATION JAN 2026) 52.222-35, Equal Opportunity for Veterans (DEVIATION JAN 2026) 52.222-36, Equal Opportunity for Workers with Disabilities (DEVIATION JAN 2026) 52.222-37, Employment Reports on Veterans (DEVIATION JAN 2026) 52.222-50, Combating Trafficking in Persons (DEVIATION JAN 2026) 52.222-90, Addressing DEI Discrimination by Federal Contractors (DEVIATION JAN 2026) 52.223-23, Sustainable Products and Services (DEVIATION JAN 2026) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) 52.232-39 Unenforceability of Unauthorized Obligations (June 2013) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-3, Protest After Award (DEVIATION JAN 2026) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) 52.240-90, Security Prohibitions and Exclusions Representations and Certifications (DEVIATION JAN 2026) 52.240-91, Security Prohibitions and Exclusions (DEVIATION JAN 2026) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (DEVIATION JAN 2026)

CAR CLAUSES INCORPORATED BY REFERENCE:

1352.201-70, Contracting Officer’s Authority 1352.201-72, Contracting Officer Representative 1352.209-73, Compliance with the Laws 1352.209-74, Organizational Conflict of Interest

PROVISIONS & CLAUSES in Full Text:

FAR 52.225-5, TRADE AGREEMENTS. (NOV 2023)

FAR 52.225-6, TRADE AGREEMENTS CERTIFICATE.

As prescribed in 25.601(c)(2), insert the following provision:

TRADE AGREEMENTS CERTIFICATE (FEB 2021)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."

(b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.

Other End Products:

[List as necessary]

(c) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for those products are insufficient to fulfill the requirements of this solicitation.

(End of provision)

FAR 52.225-18, PLACE OF MANUFACTURE

As prescribed in 25.601(f), insert the following provision:

Place of Manufacture (Aug 2018)

(a) Definitions. As used in this provision—

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) FPSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-

(1) □ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) □ Outside the United States.

(End of provision)

FAR 52.247-34, FOB DESTINATION

As prescribed in 47.303-6(c), insert the following clause:

F.O.B. Destination (Jan 1991)

(a) The term "F.O.B. destination," as used in this clause, means-

(1) Free of expense to the Government, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

(2) Supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarder for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.

(b) The Contractor shall-

(1)(i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

(End of clause)

FAR 52.247-48, FOB DESTINATION-EVIDENCE OF SHIPMENT

As prescribed in 47.305-4(c), insert the following clause:

F.O.B. Destination-Evidence of Shipment (Feb 1999)

(a) If this contract is awarded on a free on board (F.O.B.) destination basis, the Contractor-

(i) If transportation is accomplished by common carrier, a signed copy of the commercial bill of lading for the supplies covered by the Contractor’s invoice, indicating the carrier’s intent to ship the supplies to the destination specified in the contract.

(ii) If transportation is accomplished by parcel post, a copy of the certificate of mailing.

(iii) If transportation is accomplished by other than common carrier or parcel post, a copy of the delivery document showing receipt at the destination specified in the contract.

(b) The Contractor is not required to submit evidence of shipment documentation with its invoice.

(End of clause)

CAR 1352.233-70 Agency Protests

(a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999)

(b) Agency protests filed with the Contracting Officer shall be sent to the following address:

NIST

ATTN: Angela Hitt, CONTRACTING OFFICER 325 Broadway Boulder, CO 80305 Email: Angela.Hitt@nist.gov

(c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address:

NIST/ACQUISITION MANAGEMENT DIVISION

ATTN: Joseph Widdup 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899

(d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority.

(e) Service upon the Contract Law Division shall be made as follows:

U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W.

Washington, D.C. 20230 EMAIL: contactcld@doc.gov

FAX: (202) 482-5858

CAR 1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS

(a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed.

(b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims.

(c) Service upon the Contract Law Division shall be made as follows:

U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W.

Washington, D.C. 20230 EMAIL: contactcld@doc.gov

FAX: (202) 482-5858

CLAUSES:

1352.246-70 PLACE OF ACCEPTANCE (APR 2010)

(a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract.

(b) The place of acceptance will be:

National Institute of Standards and Technology 325 Broadway Boulder, CO 80504

And

National Institute of Standards and Technology 100 Bureau Drive, Gaithersburg, MD 20899

(End of clause)

NIST LOCAL-9 CUSTOMS

Ship to: National Institute of Standards and Technology 325 Broadway Blvd, Shipping and Receiving Boulder, CO 80305 c/o Laing International Customs Broker Dulles International Airport (IAD) Washington, D.C. 20166-9547 USA Paul Peterson, License Custom Broker 100 Carpenter Drive, Suite 202 Sterling, VA 20164 Phone (703) 471-9279 Ext 200 Fax (703) 471-8436

NIST LOCAL-10 DELIVERY INSTRUCTIONS

Contractor shall coordinate delivery (including installation and training if applicable) with the Technical Information Contact identified herein.

(End of Clause)

NIST LOCAL-39 MARKING/PACKING INSTRUCTIONS

(1) If the total contract/order includes multiple quantities of the same or like item(s), segregated as separate CLIN/Item numbers, deliverables shall be packed accordingly. Each individual Package / container in the shipment shall include deliverables on a per-CLIN or Item basis.

(2). For each shipment made under this contract/order, the Contractor shall furnish itemized packing list(s), enumerating the specific contents of each shipping container and what specific individual components constitute a full and complete "unit" for each bid item. The packing list shall include the brief description of each item found in the Schedule. If more than one container is required for each unit, each container should be marked accordingly, e.g., "Box 1 of 2," "Box 2 of 2," and the boxes, where feasible, should be taped or shrink-wrapped together as an issuable unit.

(3). The contract number AND CONTRACT LINE-ITEM NUMBER (CLIN) OR ORDER ITEM NUMBER shall be placed on the exterior of all containers.

(End of Clause)

NIST LOCAL-53 CONTRACTING PERFORMANCE DURING CHANGES IN NIST OPERATION STATUS

All contractors performing work on active contracts at the U.S. Department of Commerce (DOC), National Institute of Standards and Technology (NIST) campuses and/or working in NIST workspaces should go to the www.nist.gov website and under the "About NIST" tab click on "Visit". This site includes information about campus access and security information; identification requirements; parking information and more.

Contractor personnel are required to check the appropriate campus operating status and personnel requirements at https://www.nist.gov/campus-status daily prior to arriving on site. All personnel must adhere to the requirements set forth in the operating status.

Unless otherwise stated in the contract terms and conditions, normal days of business operation are Monday through Friday, excluding Federal Holidays. However, throughout the contract period of performance, there may be circumstances beyond the control of NIST that will impact normal days of business operation such as inclement weather, power outages, etc. In circumstances such as these, the Contractor must call the appropriate NIST campus status line to verify the operating status:

Gaithersburg Campus Operating Status Line:

(301) 975-8000

(800) 437-4385 x8000 (toll free)

Boulder Campus Operating Status Line:

(303) 497-4000

(303) 497-3000 option 2

In the event of a lapse in appropriation, access to Government facilities and resources, including equipment and systems will be limited to excepted personnel for both Federal employees and contractor personnel. If performance of the contract is onsite and/or requires Government interaction, unless the contractor has been, or is notified that it is required to work under an excepted status, the contractor must stop work. The work stoppage shall remain in effect until the lapse is resolved, and notification is provided via the NIST website at www.nist.gov (banner on front page) and/or the NIST operating status line(s). Additionally, contractors are encouraged to monitor public broadcasts or the Office of Personnel Management's website at www.opm.gov for the Federal Government operating status.

NIST will provide notification to all contractors that are determined to have excepted status. All excepted contractors are required to continue performance and communicate with the appointed Contracting Officer's Representative (COR) for further guidance, or NIST Contracting Officer if a COR is not appointed.

Contractors with active supply or service contracts that are fully funded at the time of contract award and do not require access to Government facilities, resources, or active administration by Government personnel in a manner that would not cause the Government to incur additional obligations during the lapse in appropriation may continue performance.

Please note that in all circumstances that impact operations on the NIST campuses, contractors are expected to follow all direction and guidance provided by NIST authorities.

(End of Clause)

NIST LOCAL-54, ELECTRONIC BILLING INSTRUCTIONS

Instructions: use in all awards that require electronic submission of invoices.

NIST requires that Invoice/Voucher submissions are sent electronically via email to INVOICE@NIST.GOV.

Each Invoice or Voucher submitted shall include the following:

(1) Contract number;

(2) Contractor name and address;

(3) Unique entity identifier (see www.sam.gov for the designated entity for establishing unique entity identifiers);

(4) Date of invoice;

(5) Invoice number;

(6) Amount of invoice and cumulative amount invoiced to-date;

(7) Contract Line-Item Number (CLIN);

(8) Description, quantity, unit of measure, unit price, and extended price of supplies/services delivered;

(9) Prompt payment discount terms, if offered; and

(10) Any other information or documentation required by the contract.

(End)

Contract Performance During Changes in NIST Operating Status

All contractors performing work on active contracts at the U.S. Department of Commerce (DOC), National Institute of Standards and Technology (NIST) campuses and/or working in NIST workspaces should go to the www.nist.gov website and under the "About NIST" tab click on "Visit". This site includes information about campus access and security information; identification requirements; parking information and more.

Contractor personnel are required to check the appropriate campus operating status and personnel requirements at https://www.nist.gov/campus-status daily prior to arriving on site. All personnel must adhere to the requirements set forth in the operating status.

Unless otherwise stated in the contract terms and conditions, normal days of business operation are Monday through Friday, excluding Federal Holidays. However, throughout the contract period of performance, there may be circumstances beyond the control of NIST that will impact normal days of business operation such as inclement weather, power outages, etc. In circumstances such as these, the Contractor must call the appropriate NIST campus status line to verify the operating status:

Gaithersburg Campus Operating Status Line:

(301) 975-8000

(800) 437-4385 x8000 (toll free)

Boulder Campus Operating Status Line:

(303) 497-4000

(303) 497-3000 option 2

In the event of a lapse in appropriation, access to Government facilities and resources, including equipment and systems will be limited to excepted personnel for both Federal employees and contractor personnel. If performance of the contract is onsite and/or requires Government interaction, unless the contractor has been, or is notified that it is required to work under an excepted status, the contractor must stop work. The work stoppage shall remain in effect until the lapse is resolved and notification is provided via the NIST website at www.nist.gov (banner on front page) and/or the NIST operating status line(s). Additionally, contractors are encouraged to monitor public broadcasts or the Office of Personnel Management's website at www.opm.gov for the Federal Government operating status.

NIST will provide notification to all contractors that are determined to have excepted status. All excepted contractors are required to continue performance and communicate with the appointed Contracting Officer's Representative (COR) for further guidance, or NIST Contracting Officer if a COR is not appointed.

Contractors with active supply or service contracts that are fully funded at the time of contract award and do not require access to Government facilities, resources, or active administration by Government personnel in a manner that would not cause the Government to incur additional obligations during the lapse in appropriation may continue performance.

Please note that in all circumstances that impact operations on the NIST campuses, contractors are expected to follow all direction and guidance provided by NIST authorities.

BILLING INSTRUCTIONS

NIST requires that Invoice/Voucher submissions are sent electronically via email to INVOICE@NIST.GOV.

Each Invoice or Voucher submitted shall include the following:

(1) Contract number;

(2) Contractor name and address;

(3) Unique entity identifier (see www.sam.gov for the designated entity for establishing unique entity identifiers);

(4) Date of invoice;

(5) Invoice number;

(6) Amount of invoice and cumulative amount invoiced to-date;

(7) Contract Line-Item Number (CLIN);

(8) Description, quantity, unit of measure, unit price, and extended price of supplies/services delivered;

(9) Prompt payment discount terms, if offered; and

(10) Any other information or documentation required by the contract.

INVOICING PROCESSING PLATFORM- IPP

Payment requests must be submitted electronically through the U.S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable payment request or invoicing instructions, Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

The Contractor must use the IPP website to register, access, and use IPP for submitting payment requests. If not already enrolled, the Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email within three to five business days of the addition of the contract award to IPP. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email: IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting payment requests, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. Contact the Contracting Officer for more information on submitting a waiver request.