Attachment 2 142 Wing W50S8Y-22-Q-5005-Markforged X7 Specification Sheet.pdf

The X7 prints industrial-grade manufacturing jigs, jaws, tools, fixtures, and end-use parts. Designed from the ground up to survive the production floor environment and capable of printing parts stronger than machined aluminum for a fraction of the cost, the X7 delivers unparalleled surface finish, build size, and reliability. Accelerate part production with Turbo Print, our fastest print mode, and verify dimensional accuracy with Blacksmith adaptive manufacturing technology — only available on the X7.

PRODUCT SPECIFICATIONS

X7 (Gen 2) markforged.com F-PR-3012REV 4.5 - 2021/03/04

* Continuous carbon fiber data. Note: All specifications are approximate and subject to change without notice.

Printer Properties

Process Fused Filament Fabrication, Continuous Filament Fabrication

Build Volume 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

Weight 48 kg (106 lbs)

Machine Footprint 584 x 483 x 914 mm (23 x 19 x 36 in)

Print Bed Kinematic coupling — flat to within 80 μm

Laser In-process inspection, active print calibration, bed leveling

Extrusion System Second-generation extruder, out-of-plastic and out-of-fiber detection

Power 100–240 VAC, 150 W (2 A peak)

RF Module Operating Band 2.4 GHz Wi-Fi Standards 802.11 b/g/n

Materials Plastics Available Onyx, Onyx FR, Onyx ESD, Nylon White

Fibers Available Carbon fiber, fiberglass, Kevlar®, HSHT fiberglass

Tensile Strength 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) *

Tensile Modulus 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) *

Part Properties

Layer Height 100 μm default, 50 μm minimum, 250 µm maximum

Infill Closed cell infill: multiple geometries available

Software Eiger Cloud Slicer, part / build management (other options available at cost)

Security Two-factor authentication, org admin access, single sign-on

Blacksmith Adaptive manufacturing platform (additional purchase required)

SIDE VIEWFRONT VIEW

23” 19”

36”