Attachment 1C (Building 233).pdf

Attachment 1C August 15, 2019

pg. 1

BUILDING 233

ITEM 1: Wash Rack equipment

• Inspect all fittings and soldered joints

• Inspect all hoses for cracks, splits, and excessive wear

• Inspect all automatic drains for operation

• Inspect and clean water screens and filters

• Inspect and replace high-pressure nozzles as required

• Inspect and replace quick disconnects as required

• Service and replace particulate filters on equipment when required

• Inspect and tighten electrical connections as required

• Lubricate motors as required

• Inspect and service all pumps as required

• Inspect all pressure gauges for operation

• Test any emergency or warning horns, lights if required

• Inspect and replace worn, torn or cracked seals

• Additional tasks as specified in manufacture’s documentation for preventive maintenance

• All maintenance shall be performed in accordance with manufactures’ recommendations.

Attachment 1C August 15, 2019

pg. 2

ITEM 2: Condor EcoFlex, Model 56413003 (4530C/ w/sweep system)

• Inspect and clean tanks and hoses

• Inspect, clean, rotate the brushes and pads

• Inspect and clean squeegee

• Inspect and clean vacuum shut off float

• Inspect and clean vacuum motor foam float

• Inspect and clean hopper on cylindrical system

• Inspect scrub housing skirts required

• Inspect each battery cell’s water level

• Inspect and clean solution filter

• Inspect foot/parking brake for wear and adjustment

• Clean solution trough on cylindrical system

• Purge detergent system

• Perform side broom maintenance and adjustment

• Grease squeegee caster wheel axel and pivot

• Grease steering wheel shaft universal joint

• Grease steering chain

• Grease squeegee mount angle adjustment knob threads

• Lightly lubricate squeegee tool end wheels

• Lightly lubricate recovery tank release latch

• Lightly lubricate brake pedal (parking brake) linkage

• Inspect vacuum motor carbon brushes annually

• Additional tasks as specified in manufacture’s documentation for preventive maintenance

• All maintenance shall be performed in accordance with manufactures’ recommendations.