Attachment 1 PWS VM Vehicle Repair dtd 6Aug23.docx

PERFORMANCE WORK STATEMENT (PWS)

FOR

VEHICLE PAINTING SERVICES

1.0. General:

1.1. Scope: The Contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform Vehicle Painting Services (non-personal service), as defined within this PWS.

1.1.1. Objective: Remove existing paint, treat, prime, and paint two (2) vehicles (2008 Ford F150 4x4, and VIN: 1FTR14V28KE56065 and 2010 International, Work Star Dump Truck, license plate AF10D00511, VIN# IHTWGADR8BJ371802). Contractor will remove all surface rust and paint by means of media blasting. Repair all dents and patch any holes in truck. Vehicle cab and doors will be stripped to bare metal or gel coat to include door jams. Treat with industry standard rust/corrosive preventative. Prime all treated areas. Entire vehicle shall be painted with two coats of Base coat, clear coating, Paint OEM color code (Strata Blue No.15045).

1.2. Background: Existing paint is original to the vehicles and are peeling and flaking off the body of the cab.

1.3. Period of Performance (PoP): Service must be completed within four (4) weeks post contract award.

1.4. General Information:

1.4.1. Place and Performance of Services: Contractor’s facility.

1.4.2. Combating Trafficking in Persons: The United States Government has adopted a zero-tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The Contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at FAR 22.17.

1.4.3. Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The Contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies PWS. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential.

1.5 Telework: The Government does not permit the contractor to telework in support of this requirement. In furtherance of Continuity of Operations Planning (COOP), a telework program may be enacted to ensure that the Government's mission-critical operations stay operational during times of national emergency or incidents of national significance. Telework shall be at no additional cost to the Government.

1.6 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.6.1 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.7 Recognized Holidays: Contractor shall not perform services on these holidays. The following are recognized United States (US) holidays. The contractor shall not) perform services on these days:

1.7.1 New Year’s Day: January 1st

1.7.1.2 Martin Luther King, Jr.’s Birthday

1.7.1.3 President’s Day

1.7.1.4 Memorial Day

1.7.1.5 Juneteenth National Independence Day: June 19th

1.7.1.6 Independence Day: July 4th

1.7.1.7 Labor Day

1.7.1.8 Columbus Day

1.7.1.9 Veteran’s Day: November 11th

1.7.1.10 Thanksgiving Day

1.7.1.11 Christmas Day: December 25th

1.8 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.9 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer Representative (COR) NLT 10 days after contract award. After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.9.1 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: None.

3.2 Materials: None.

3.3 Equipment: None.

3.4 Services: None.

3.5 Utilities: None.

4.0. Contractor Furnished Property, Materials, and Equipment (CFP/M/E): The Contractor shall provide all materials and/or equipment required to complete services required within this PWS.

4.1. General: The Contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

5.0. Requirements: The Contractor shall provide all labor, tools, materials, and transportation necessary to accomplish the following:

5.1. Transportation. The Contractor shall provide all required transportation of the vehicle to/from the Contractor’s painting facility and Camp Pendleton State Military Reservation, Virginia Beach, Virginia 23451.

5.2. Preparation. The Contractor shall prepare the vehicle in order for it to be ready for stripping, and protect areas not intended to be painted.

5.3. Stripping. The Contractor shall media blast the vehicle to remove any existing surface rust and paint. Vehicle shall be stripped to bare metal or gel coat.

5.4. Treatment. The Contractor shall use industry standard products to treat the bare metal or gel coat to prevent corrosion.

5.5. Priming. The Contractor shall prime all treated areas.

5.6. Paint. The Contractor shall apply a minimum of one base coat and two clear coats. Paint code shall be Strata Blue No.15045 or equivalent. Strata Blue No.15045

5.7. Labeling/Decals. Following applicable cure times, the Contractor shall replace right rear taillight lens assembly, all safety, and operating decals removed during the vehicle preparation, and/or stripping.