Attachment 01 - Salient Characteristics .docx
DOCX document 17 KB Posted
- Attached to
- MXG Tool Storage Cabinets
- Solicitation number
- FA488724Q0029
About this file
This document appears to be a set of Salient Characteristics for new tool storage cabinets and workbenches required by the 61st Aircraft Maintenance Unit at Luke AFB, Arizona. The requirements specify two sections of cabinets totaling 438 inches in length, with a combination of 30-inch and 45-inch wide cabinets, and a total of 81 drawers capable of holding up to 400 lbs each. The cabinets must be lockable with a single key and have a recessed base. The workbench tops will be stainless steel with an MDF core. The cabinets must also include elevated computer/monitor mounting systems.
The related federal contract opportunity is Solicitation Number FA488724Q0029, issued by the Department of the Air Force's Air Education and Training Command, to acquire the required tool storage cabinets. Quotes in response to the Request for Quote (RFQ) are due by 3:00 AM EST / 12:00 PM Arizona time on 30 July 2024. All questions regarding the RFQ must be submitted by 11:00 AM EST / 8:00 AM Arizona time on 29 July 2024.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MXG Tool Storage Cabinets Questions and Answers.docx | DOCX document | |
| Solicitation - FA488724Q0029.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
FOR PURCHASE OF CABINET STORAGE/WORK BENCH
FOR
61st Aircraft Maintenance Unit
LUKE AFB, AZ
The 61st AMU requires new tool storage cabinets with a work area surface top. It will be separated into two sections that connect by a foldable top to allow entering/exiting. 1st section will span approximately 258 inches in length, 37 inches high, 27 inches deep. 2nd section will span approximately 180 inches in length and 37 inches high and 27 inches deep. All cabinets need to be able to be locked and unlocked with the same key and have a recessed base.
258 inch section
- Cabinet housings consisting of 7-30inchs wide and 1-45inches wide
- Total of 49 drawers of various sizes
· Drawers need to able to hold up to 400 lbs
· Drawers need to be on ball-bearing carriage system
· Stainless steel workbench top with MDF core 258inches in length
· Elevated computer/monitor mounting system that can hold 4 computers/monitors
180 inch section
· Cabinet housings consisting of 4-30inches wide and 1-22.5inch wide
· Total of 32 drawers of various sized
· Drawers need to able to hold up to 400 lbs
· Drawers need to be on ball-bearing carriage system
· Stainless steel workbench Top with MDF core 180inchs in length
· Foldable walk-through top 36inches width with latch
· Elevated computer/monitor mounting system that can hold 3 computers/monitors
STATEMENT OF WORK
Assemble, Install, and anchor the cabinets in the location where the AMU requires it and in accordance with manufacturer’s instructions.
END OF STATEMENT OF NEED
File details come from the government source that posted it. Updated .