Attachment 0003- Control Spreadsheet WVA Spec 08-22-3416.xls
XLS spreadsheet 48 KB Posted
- Attached to
- Vertical Turning Lathe
- Solicitation number
- W911PT22Q0075
About this file
This document includes an attachment specifying technical requirements for a new vertical turning lathe and the related federal contract opportunity on the Federal Business Opportunities website. The attachment provides a detailed control spreadsheet listing over 100 required control system features and capabilities that vendors must include in their proposals. It notes that failure to meet all requirements will result in a proposal being deemed unacceptable. The related federal contract opportunity seeks one base and one optional new vertical turning lathe meeting specification number 08-22-3416 to be provided to the Department of the Army Materiel Command Contracting Command Detroit Arsenal.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911PT22Q00750001.pdf | ||
| Attachment 0001- Vertical Turning Lathes- WVA Spec 8-22-3416.docx | DOCX document | |
| Attachment 0001- Vertical Turning Lathes- WVA Spec 8-22-3416.pdf | ||
| Attachment 0002- Comply Sheet WVA Spec 08-22-3416.xlsx | XLSX spreadsheet | |
| W911PT22Q0075 - Vertical Turning Lathe (1).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Control Comparison
| Directions: | ||||
| 1.) Each vendor must use the spreadsheet below for the input requested. | ||||
| 2.) This spreadsheet contains the final requirements for the control system being offered. It is mandatory that each vendor quotation/proposal include all of the features/capabilities listed. GE Fanuc part numbers were provided where known. Features/capabilities crossed out have been removed from the requirements. | ||||
| 3.) Use this spreadsheet and indicate with an "X" under "Vendor Input" to confirm your understanding that the feature/capability/option will be provided with the system being provided. | ||||
| 4.) Please note that failure to provide all the requirements listed will classify your proposal as unacceptable. | ||||
| 5. Please read carefully because some terminology may have been changed. | ||||
| Fanuc Option # | Vendor Input | Vendor Input | Comments | |
| Control Being Offered | ||||
| Use of Undefined Variables in Part Programs | ||||
| Use of Assigned Variables in Part Programs | ||||
| Math Operators in Part Programs | ||||
| Boolean Operators in Part Programs | ||||
| Math Functions in Part Programs | ||||
| If, GoTo, Do, While | ||||
| Change/Retrieve Table Data | ||||
| Contour Cycles (G70 - G76) (Multiple Repetative Canned Cycles) | J877 | |||
| Interrupt Program, Move Axes to Adjust Offsets | S825 | |||
| Presets G92, G50 | ||||
| Digital Servo Interface | J800 | |||
| RS232 port and Ethernet ports | ||||
| Retract During Threading | J825 | |||
| Retrace Tool Path (Run Program Backwards) - (Manual Handle Retrace) | J998 | |||
| Part Program Storage (2MB minimum) + 1000 stored part programs | J948 & J953 | |||
| External Data Input | J913 | |||
| 200 Tool Offsets | J927 | |||
| Programmable Data Input (G10) | J872 | |||
| Manual Handle Interruption Feed | J837 | |||
| Manual Guide I | N/A | |||
| Additional Custom Macros | J887 | |||
| Color Graphics - (Graphics Display) | J972 | |||
| 3rd axis - (For Tool Changer) | J801 | |||
| Axes Synchronous Control | J843 | N/A | ||
| Special G Code Input | J871 | |||
| Interruption for Custom Macro | J874 | |||
| Multiple Repetitive Canned Cycles - (G70-G76) | J889 | |||
| Coordinate System Rotation | J893 | |||
| PMC w/ 112k Steps | ||||
| Spindle Interface – Serial | J850 | |||
| Actual Spindle Speed Output | J856 | |||
| Tool Life Management | J935 | |||
| Automatic Tool Compensation | J932 | |||
| Separate Type MDI (61 Keys) | ||||
| Restart of Automatic Operation | J838 | |||
| Automatic Tool Offset G36/G37 | ||||
| Work Coordinate System Shift | J894 | |||
| Manual Intervention and Return | ||||
| HSSB | ||||
| Ladder Edit for HSSB Function | J820 | |||
| Axis Control by PMC | J804 | |||
| Operator’s Panel 520mm | S656 | |||
| Tool Offset Memory C | J937 | |||
| Par. 3.3.1 | ||||
| Abs./Inc. Programming | ||||
| Leading Zero Omission | ||||
| Decimal Point Programming Input | ||||
| Program Resolution .0001” min. | ||||
| Single Block Mode | ||||
| Program/Option Stop | ||||
| Programmed Operator Messages | ||||
| Mult G and M Codes in Same Block | ||||
| Optional Block Skip | ||||
| Program Rewind | ||||
| Linear Interpolation | ||||
| Circular Interpolation | ||||
| Rapid Traverse | ||||
| Inch/Metric Switchable Conversion | J876 | |||
| Dry Run (With & Without Axes Inhibit) | ||||
| Canned Cycles | J878 | |||
| Threading-Constant Lead & Taper (Continuous) | J826 | |||
| Threading-Variable Lead | J827 | |||
| Threading-Multiple Start | ||||
| Threading-Threads per Inch | ||||
| FPR, FPM Programming | ||||
| Dwell-Time Based | ||||
| Dwell-Revolution Based | ||||
| Coordinate System-Machine (G52-G59) | J894 | |||
| Coordinate System-Work offset 48 pairs | J895 | |||
| Program Edit-Foreground/Background | ||||
| Corner Rounding/Chamfer | J875 | |||
| Direct RPM Spindle Speed Programming | ||||
| Mirror Image Programming | ||||
| Subroutines w/ Mult Level Nesting | ||||
| Custom Macros | J873 | |||
| Stroke Checks - 2/3 Stroke Checks | J840 | |||
| Stored Limit Checks Before Move | J749 | |||
| Tool Identifier | ||||
| Tool Pocket Identifier | ||||
| Tool Geometry & Wear Tool Offsets/ Compensation-Tool Radius (200 pairs) | J931 | |||
| Tool Offsets/ Compensation - Fixture | ||||
| Additional Work Coordinate system, 48 Pairs (Mills) | J895 | |||
| Tool Life Management | J935 | |||
| Horsepower Monitoring | ||||
| iAdapts Adaptive Control with CD & Manual | S898 | N/A | ||
| Macro Executor & C-language Executor 700K reserved for system S/W | J734 for iadapt | N/A | ||
| Custom Software Size 2MB | J738#2M | |||
| Programmable Safe Zones (Same as stored stroke check) | J840 | |||
| Tool Retract and Retrace - (Tool Retract & Recover) | J823 | |||
| Program Delete from System Memory | ||||
| Inverse Time Feed | J715 | |||
| Constant Surface Speed | J855 | |||
| Presets G92, G50 | ||||
| Program Restart | J838 | |||
| Plus and Minus Programming on Linear & Rotary Axes | ||||
| Max. Feedrates Capable of: Rapid – Min. current capabilities | ||||
| Max. Feedrates Capable of: Point to Point - Min. current capabilities | ||||
| Max.Feedrates capable of: Contour – Min. current capabilities | ||||
| Feedback Resolution-Linear Axis: .0001" | ||||
| Feedback Resolution-Rotary Axis: .001 degree | ||||
| Compensation Tables-Backlash | ||||
| Compensation Tables-Pitch Error Comp. (BiDirectional) | S656 | |||
| Interpolation Type Straightness Compensation (128) | S639 | |||
| Position Display-Relative | ||||
| Position Display-Absolute | ||||
| Position Display-Machine | ||||
| Position Display-Distance to Go | ||||
| Position Display-Following Error | ||||
| Coordinate System Display Edit-Machine | ||||
| Coordinate System Display Edit-Work | ||||
| Tool Offset Display/Edit-Length | ||||
| Tool Offset Display/Edit-Radius | ||||
| Machine Status Display-Feedrate | ||||
| Machine Status Display-Feedrate Override | ||||
| Machine Status Display-Spindle Rate | ||||
| Machine Status Display-Spindle Speed Override | ||||
| Machine Status Display-Real Time PLC Error Reporting | ||||
| Parameter Display/Edit | ||||
| Message Display-Active M,G,S,T,D,H Codes | ||||
| Program Display-Axis Position | ||||
| Program Display-Program Line Number | ||||
| Program Display-Program Name | ||||
| Program Display-Subroutine Line Number | ||||
| Program Display-Subroutine Name | ||||
| Program Display-Programmed Spindle Speed and Feedrate | ||||
| Program Loading/Storage (2MB storage minimum) | ||||
| Fast Data server and Data server buffer mode | S737 | |||
| Program Check (With or Without Axes Inhibited) | ||||
| Data Protection | ||||
| Clock Function | ||||
| Self-Diagnostic Functions | ||||
| PLC/System Software Display-Ladder Logic | ||||
| Spindle Load Meter/Horsepower Display | ||||
| Program Sequence Number Search | ||||
| Help Functions | ||||
| Operation Modes-Manual | ||||
| Operation Modes-MDI | ||||
| Operation Modes-Auto | ||||
| Operation Modes-Edit | ||||
| Axis Select | ||||
| Axis Jog +/- : Continuous | ||||
| Axis Jog +/- : Incremental | ||||
| Feedrate Override | ||||
| Rapid Override | ||||
| Spindle Control-CW | ||||
| Spindle Control-CCW | ||||
| Spindle Control-Off | ||||
| Spindle Control-Neutral | ||||
| Spindle Jog | ||||
| Spindle Orient/Program In Degrees | J853 | |||
| Spindle Speed Override | ||||
| Feedhold | ||||
| Cycle Start | ||||
| Cycle Stop | ||||
| E-Stop | ||||
| Home Axis | ||||
| Single Block | ||||
| Option Stop | ||||
| Tool Chain +/- | ||||
| Tool Engage/Release | ||||
| Return Jog | ||||
| Overtravel Override Capability | ||||
| Manual Pulse Generator (MPG) | ||||
| Number Axes | ||||
| Maximum Feedrates | ||||
| Lamp Test Pushbutton | ||||
| Servo Tuning | ||||
| Coordinate System Definition | ||||
| Following Error Limits | ||||
| Axis Inhibit | ||||
| Tandem Axis Control | J733 | |||
| Dual Position Feedback | J704 | |||
| Bell Shaped Acc/Dec After Interpolation for cutting Feed | J829 | |||
| Panel-I Open Face PC | N/A | |||
| Core 2 DUO 2.26 GHZ | N/A | |||
| 64 GB Solid State Drive (SSD) | N/A | |||
| 4 GB RAM | N/A | |||
| CD-RW Drive | ||||
| 10 Base-T Ethernet Card | S707 | |||
| RS-232 | ||||
| Hulapoint Pointing Device | ||||
| QWERTY Horizontal Keyboard | ||||
| 15" Fanuc Panel i LCD with Softkey, Touch Panel and Protected Cover | ||||
| Operating System Windows XP Latest Edition & SPs | B413 | |||
| Uninterrupted Power Supply (UPS) | B413 |
&CAttachment 0003 FY23 New 4-Axis Vertical Turning Center Spec. #08-22-3416
File details come from the government source that posted it. Updated .