Attachment 0001 Statement of Work.pdf
PDF 102 KB Posted
- Attached to
- Workboat Anchors
- Solicitation number
- W912EE26QA007
About this file
This is a specifications and requirements document for a federal procurement solicitation issued by the USACE Vicksburg District Mat Sinking Unit. The procurement requires six (6) new, pre-assembled steel workboat-style anchors with a 6000 LB capacity. All anchors must meet specific dimensional standards including a height of 118 inches, width of 112 inches, fluke height of 74 inches, and fluke width of 47-1/2 inches, with a 3-3/4 inch shackle and flukes capable of turning 30 degrees. The anchors must be proof tested at 121300 (or similar for that size) and certified to standards established by a recognized classification society such as ABS, DNV, or Lloyd's. All anchors shall be completely painted per manufacturer specifications and delivered free of rust, pitting, nicks, cuts, or any other damage.
Contractors must submit certification documentation with their bid and provide photographs of the anchors upon request before delivery to verify compliance with specifications. All six anchors must be delivered within 60 days after the Vicksburg District contracting office issues the notice to proceed to USACE Mat Sinking Unit, 2577 Haining Road, Vicksburg, MS 39183, Attention Nathan Jabour. Freight costs shall be included in the pricing per anchor.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation W912EE26QA007.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Workboat Anchors for Mat Sinking Unit
Specifications/Requirements The Mat Sinking Unit of the USACE Vicksburg District requires the procurement of six (6) 6000 LB workboat anchors in accordance with these specifications. All delivered anchors shall meet the below specifications.
• Six (6) each Steel Workboat-style Anchors
• Anchors shall be delivered as pre-assembled units and not as individual parts
• Anchors shall be New and Unused
• Anchors shall be completely painted according to manufacturer’s specifications
• Anchors shall be free of rust, pitting, nicks, cuts, or any other damage
• Standard Dimensions (actual shall be similar):
• Height – 118”
• Width – 112”
• Fluke Height – 74”
• Fluke Width – 47-1/2”
• Width between Fluke Tips – 18-5/8”
• 3-3/4” Shackle
• Flukes shall be capable of turning 30 degrees
• Proof tested at 121300 (or similar for that size)
• Anchors shall meet the standards of a recognized classification society such as ABS, DNV, Lloyd’s, or other reputable society
• Documentation of certification shall be provided with bid
Delivery Requirements The contractor shall provide photos of the anchors upon request before delivery so that the Mat Sinking Unit may ensure that the anchor meet the required specifications that are verifiable from a photo. All anchors shall be delivered within 60 days after the Vicksburg District contracting office gives the notice to proceed. Freight shall be included with pricing per anchor.
Anchors shall be delivered to the following address:
USACE Mat Sinking Unit 2577 Haining Rd Vicksburg, MS, 39183 ATTN: Nathan Jabour
File details come from the government source that posted it. Updated .