Att 5 Offer Adequacy Checklist.xlsx
XLSX spreadsheet 13 KB Posted
- Attached to
- Crawler Excavator Federal contract opportunity
- Solicitation number
- FA282323QA024
About this file
This document contains an offer adequacy checklist for a federal solicitation requesting offers for a crawler excavator. The solicitation was issued by the Department of the Air Force Materiel Command Test Center seeking a crawler excavator that meets or exceeds the specifications listed in the checklist. Offerors must provide documentation that the equipment offered is brand new, comes with a 36-inch heavy duty bucket, has a net rated power of 250-275 horsepower, and meets the additional technical requirements and lift capacity specifications contained in the checklist. Questions regarding the solicitation are due by noon on May 12, 2023 and offers must be submitted by noon on May 18, 2023. The offeror must complete and include the representations and certifications, warranty tracking form, and Buy American certificate with their offer.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFIs 18 May 23.pdf | ||
| FA2823-23-Q-A024 Amend.pdf | ||
| FA2823-23-Q-A024.pdf | ||
| Att 4 Reps Certs.pdf | ||
| WarrantyInformation-VERSION2.6.pdf | ||
| SourceofRepairInstructions-VERSION2.1.pdf | ||
| Att 1 TRD 22 Mar 23.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Offer Adequacy / Responsiveness Assessment | |||
| Requirement | Literature / Offer clearly shows that it meets or exceeds: | YES | Comments |
| Equipment offered is brand new | |||
| Comes with 36-inch heavy duty bucket | |||
| Net Rated Power 250 - 275 hp | |||
| Off-Level Capacity 70% (35 deg.) | |||
| Aspiration Series turbocharged, air-to-air charge-air cooler | |||
| Cooling: Electric, on-demand cooling fans standard | |||
| Maximum Travel Speed: Low 3.2 km/h (2.0 mph) High 5.0 km/h (3.1 mph) | |||
| Maximum Travel Speed: High 5.0 km/h (3.1 mph) | |||
| Drawbar Pull 30 350 kg (66,900 lb.) | |||
| Controls: Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever | |||
| Track: - | Adjustment Hydraulic | ||
| Track: -Chain sealed and lubricated | |||
| Swing Mechanism: Speed 10.7 rpm/Torque 120 000 Nm (88,500 lb.-ft.) | |||
| Operating Weight: 38 765 kg (85,462 lb.) | |||
| Arm Length 3.2 m (10 ft. 6 in.) 4.0 m (13 ft. 1 in.) | |||
| Arm Digging Force: SAE 177.6 kN (39,930 lb.) 152.6 kN (34,314 lb.) | |||
| Arm Digging Force: ISO 185.0 kN (41,590 lb.) 159.0 kN (35,745 lb.) | |||
| Bucket Digging Force: SAE 225.2 kN (50,628 lb.) 225.2 kN (50,628 lb.) | |||
| Bucket Digging Force: ISO 246.0 kN (55,303 lb.) 246.0 kN (55,303 lb.) | |||
| Maximum Reach 11.10 m (36 ft. 5 in.) 11.86 m (38 ft. 11 in.) | |||
| Maximum Reach at Ground Level 10.89 m (35 ft. 9 in.) 11.67 m (38 ft. 3 in.) | |||
| Maximum Digging Depth 7.38 m (24 ft. 3 in.) 8.18 m (26 ft. 10 in.) | |||
| Maximum Digging Depth at 2.44-m (8 ft. 0 in.) Flat Bottom 7.21 m (23 ft. 8 in.) 8.04 m (26 ft. 5 in.) | |||
| Maximum Cutting Height 10.36 m (34 ft. 0 in.) 10.75 m (35 ft. 3 in.) | |||
| Maximum Dumping Height 7.24 m (23 ft. 9 in.) 7.63 m (25 ft. 0 in.) | |||
| Minimum Swing Radius 4.46 m (14 ft. 8 in.) 4.47 m (14 ft. 8 in.) | |||
| Maximum Vertical Wall 6.42 m (21 ft. 1 in.) 7.27 m (23 ft. 10 in.) | |||
| All documentation provided and operator station display data shall be in English | |||
| LIFT CAPACITY AT A HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION OF 25ft over the front: 8850 LBS | |||
| LIFT CAPACITY AT A HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION OF 25ft over side: 7870 LBS | |||
| Standard Options per Unit | |||
| Rear Camera System Qty 1 Ea | |||
| Meets FT4/EU Stage IV Emissions Qty 1 Ea | |||
| 800 mm (32 In.) Steel Track with Triple Semi-Grouser Shoes Qty 1 Ea | |||
| Lower Frame, Bottom Cover Qty 1 Ea | |||
| Hydraulic Coupler Ready Lines and Controls Qty 1 Ea | |||
| 600 In. Heavy Duty Bucket w/ Teeth Qty 1 Ea | |||
| Fuel Filter, Severe Duty Qty 1 Ea | |||
| Dealer Attachments | |||
| Hydraulic Thumb Kit, Direct for Couplers Qty 1 Ea | |||
| Hydraulic Thumb Installation Qty 1 Ea | |||
| Hydraulic Quick Coupler (Non-Variable type - Coupler and Controls Kit Qty 1 Ea | |||
| Guard, Slant Top Rub Rails Qty 1 Ea | |||
| Cab FOPS Guard Qty 1 Ea | |||
| Front Window Guard Qty 1 Ea | |||
| Top & Bottom Cab Guards Qty 1 Ea | |||
| Light Guards Qty 1 Ea | |||
| Manufacturer approved repair facility/vendor within 300 miles of Eglin AFB, FL 32542 | |||
| Delivery Timeframe Specified | |||
| Shipping FOB Point has been specified | |||
| Attachment #4 Reps and Certs has been completed and provided to Contracting | |||
| The Buy American certificate has been completed and provided | |||
| The Warranty Tracking form has been completed and submitted with offer. | |||
| Offer states it is valid for at least 60 days ARO | |||
| O&M manual will be provided for the excavator and each of the attachments. | |||
| Name, phone and fax numbers, and email address of the manufacturer and a distributor where spare parts can be purchased has been provided. | |||
| Minimum 2 year / 2,000 operating hours warranty is offered. | |||
| 1 Year extended warranty option is offered or if not available, this has been stated. |
File details come from the government source that posted it. Updated .