Att 1 TRD 22 Mar 23.pdf

Date: 22 Mar 2023

CRAWLER EXCAVATOR TECHNICAL REQUIREMENT DOCUMENT

REQUIREMENT: One (1) Crawler mounted Excavator, Brand New

Provide a Crawler mounted excavator with 36-inch heavy duty bucket with the following specifications:

• Net Rated Power 250 - 275 hp

• Off-Level Capacity 70% (35 deg.)

• Aspiration Series turbocharged, air-to-air charge-air cooler

• Cooling: Electric, on-demand cooling fans standard

• Maximum Travel Speed:

- Low 3.2 km/h (2.0 mph)

- High 5.0 km/h (3.1 mph)

• Drawbar Pull 30 350 kg (66,900 lb.)

• Controls: Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever

• Track:

- Adjustment Hydraulic

- Chain sealed and lubricated

• Minimum Ground Clearance 0.50 m (20 in.)

• Swing Mechanism: Speed 10.7 rpm/Torque 120 000 Nm (88,500 lb.-ft.)

• Operating Weight: 38 765 kg (85,462 lb.)

• Operating Dimensions:

- Arm Length 3.2 m (10 ft. 6 in.) 4.0 m (13 ft. 1 in.)

- Arm Digging Force:

- SAE 177.6 kN (39,930 lb.) 152.6 kN (34,314 lb.)

- ISO 185.0 kN (41,590 lb.) 159.0 kN (35,745 lb.)

- Bucket Digging Force:

- SAE 225.2 kN (50,628 lb.) 225.2 kN (50,628 lb.)

- ISO 246.0 kN (55,303 lb.) 246.0 kN (55,303 lb.)

- Maximum Reach 11.10 m (36 ft. 5 in.) 11.86 m (38 ft. 11 in.)

- Maximum Reach at Ground Level 10.89 m (35 ft. 9 in.) 11.67 m (38 ft. 3 in.)

- Maximum Digging Depth 7.38 m (24 ft. 3 in.) 8.18 m (26 ft. 10 in.)

- Maximum Digging Depth at 2.44-m (8 ft. 0 in.) Flat Bottom 7.21 m (23 ft. 8 in.) 8.04 m (26 ft. 5 in.)

- Maximum Cutting Height 10.36 m (34 ft. 0 in.) 10.75 m (35 ft. 3 in.)

- Maximum Dumping Height 7.24 m (23 ft. 9 in.) 7.63 m (25 ft. 0 in.)

- Minimum Swing Radius 4.46 m (14 ft. 8 in.) 4.47 m (14 ft. 8 in.)

- Maximum Vertical Wall 6.42 m (21 ft. 1 in.) 7.27 m (23 ft. 10 in.)

• All documentation provided and operator station display data shall be in English

• LIFT CAPACITY AT A HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION OF 25ft over the front: 8850 LBS

• LIFT CAPACITY AT A HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION OF 25ft over side:

7870 LBS

Standard Options – Per Unit:

• Rear Camera System Qty 1 Ea

• Meets FT4/EU Stage IV Emissions Qty 1 Ea

• 800 mm (32 In.) Steel Track with Triple Semi-Grouser Shoes Qty 1 Ea

• Lower Frame, Bottom Cover Qty 1 Ea

• Hydraulic Coupler Ready Lines and Controls Qty 1 Ea

• 600 In. Heavy Duty Bucket w/ Teeth Qty 1 Ea

• Fuel Filter, Severe Duty Qty 1 Ea

Dealer Attachments:

• Hydraulic Thumb Kit, Direct for Couplers Qty 1 Ea

• Hydraulic Thumb Installation Qty 1 Ea

• Hydraulic Quick Coupler (Non-Variable type - Coupler and Controls Kit Qty 1 Ea

• Guard, Slant Top Rub Rails Qty 1 Ea

• Cab FOPS Guard Qty 1 Ea

• Front Window Guard Qty 1 Ea

• Top & Bottom Cab Guards Qty 1 Ea

• Light Guards Qty 1 Ea

There shall be a manufacturer approved repair facility/vendor within 300 miles of Eglin AFB, FL 32542

O&M Manuals:

- A complete copy of the Operation and Maintenance Manual will be required for the excavator and each of the attachments. The manuals shall include instructions on the installation, operation, maintenance, repair, troubleshooting, and warranty. They shall also include diagrams listing all system components, part numbers, and a list of recommended spare parts. All manuals must be in the English language.

- Also included shall be the name, phone and fax numbers, and email address of the manufacturer and a distributor where spare parts can be purchased.

Warranties:

All parts, labor, and workmanship shall be covered by a minimum of 2 years or 2,000 operating hours warranty, whichever comes first. The standard commercial warranty shall pay for parts and labor cost incurred on failed covered components. The contractor shall thoroughly test the entire system and all attachments prior to delivery.

The warranty shall commence upon the date of acceptance by the Government.

Extended Warranty Option: Request an option for an additional warranty for 1 year or 1,000 operating hours, whichever comes first. This option would be exercised at the time of award.

1. The excavator, all associate attachments and equipment must be manufactured to meet or exceed industry regulation standards. No used or refurbished equipment is requested; items must be brand new. There is a preference for a domestic end product (US made product).

2. Delivery and Acceptance inspection is FOB destination. The excavator must have a Technical Drawing and

Specification package to include a Certificate of Origin with a Bill of Lading that includes VIN numbers and/or a tag/tag # IAW Florida transportation laws.

3. Delivery period of the excavator and documentation package is 240 Days After Receipt of Order (ARO).

4. Ship to location and instructions are as follows:

a. Mark For:

96 RANSS/RNRS

308 West D Avenue, STE 211

Eglin AFB, FL 32542

b. Ship To:

Eglin AFB Range C-74 Bob Sikes Road

Eglin AFB, FL 32542

6. Delivery Instructions: Contact Mr. Brad Prescott, 850-882-1534 a minimum of twenty four (24) hours prior to any shipment under this Solicitation if award is made. All the above parties may be contacted between the hours of 7:00 AM to 4:00 PM Monday through Friday excluding holidays. Note that no delivery can be accepted after 2:00 PM weekdays or on weekends.

Date: 22 Mar 2023