Att 0004 - End Cap Seals - Material Certification.docx

22 KB Posted

Attached to
Seals, End Cap for MJU-75B Countermeasures Flares - Sole Source
Solicitation number
W52P1J-21-Q-SLS7
Issued by

View the file

Other files

File Type Posted
Att 0001 - Price Matrix - MJU 75 END CAP SEALS.xlsx XLSX spreadsheet
Att 0006 - Vendor Guide - beta.sam.gov.pptx PPTX presentation
Att 0005 - FAR 52.204-24 - Sec 889.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CERTIFIED MATERIAL TEST REPORT / CERTIFICATE OF ANALYSIS

For those material(s) identified below, a Certificate of Analysis (C of A) test report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).

The test results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.

The test report(s) shall contain the following:

a. Name and address of Manufacturer and Supplier when *applicable.

(*If not manufactured by the Supplier.)

b. Purchase order number.

c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc. number.

d. Quantity of material.

e. Material testing results shall address drawing specifications.

Item Description: End Cap Seal.

Drawing: 201416442 No Rev.

Material: Rubber, Thermoplastic, Santoprene 201-55 Drawing: 20156940 No Rev.

Manufacturer Part No.: SANTOPRENE RUBBER 201-55.

Drawing Note 4: Only the item described on this drawing are approved for use in the application specified hereon. A substitute item shall not be used without prior approval by the qualifying activity.

Item (End Cap Seal) shall be in accordance with above Description, Drawings and Manufacture Part Number. Documentation to support this information should accompany shipment when received.

Each Shipment Shall be Identifiable to a Unique Lot Number.

f. Quantity tested, sample size, and specimen type as applicable.

g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.

Item: End Cap Seal.

Requirements for: MJU-75/B Program.

Jacqueline Harper

PQS

10 November, 2020.

File details come from the government source that posted it. Updated .