Att 0001 - Purchase Description - Manipulators.docx
DOCX document 14 KB Posted
- Solicitation number
- W52P1J-21-Q-MNPM
About this file
This document is a request for quote for two explosive rated manipulators with arm and tooling. The Department of the Army Materiel Command Joint Munitions Command requires the manipulators to support demilitarization operations at Crane Army Ammunition Activity in Crane, Indiana. The manipulators must meet specified technical requirements including payload capacity, reach, rotation, and ability to operate in explosive environments. Quotes are due by email and must include pricing, company information, delivery date, and literature demonstrating technical compliance. Awards will be made to the technically acceptable offer with the lowest price from a responsible small business. Delivery must be to Crane Army Ammunition Activity by the scheduled date following their receiving requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Att 0003 - Vendor Guide - beta.sam.gov.pptx | PPTX presentation | |
| Att 0002 - FAR 52.204-24 - Sec 889.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description Crane Army Ammunition Activity (CAAA) Manipulator with WM-450 Manipulator Arm with Tooling
13 OCT 2020
1.0 GENERAL SYSTEM DESCRIPTION: Crane Army Ammunition Activity (CAAA), Crane IN, requires two Manipulators be purchased to support the Demil operations. The manipulator will be required to be rated for the following Explosive environments: CLASS II DEV1 GROUP E, F, and G. Must be able to access a pick height at ground level and a place height of 40”. Must have a tool that would pitch 90 degrees, rotated 180 degrees, and grip a cylindrical part with a 4”-8” outside diameter. Must have a radial reach at least of 114” (arms level and straight). Must have at least have a 1,000lbs of payload and tooling capacity. Must be able to do 330- degrees of rotation around the main post,290-degrees of rotation around the middle joint, and 330-degrees of rotation around the end joint. Pushbutton metering control will be required for vertical lift. Manipulator will need parallel linkage to keep the tooling parallel to the floor. Must have a portable base with leveling jacks, mounting bolts, and mounting hardware. Must have supply operating controls must include two up/down, two push buttons to grip and release, one push button ‘proof’ is circuitry that requires simultaneous actuation of two pushbuttons to release part. Must have a Gripper Safety Circuit that prevents an operator from releasing an unsupported payload. Must have Safety lock valves that hold cylinder in position when power is lost. Must has a minimum of 3 to 1 structural design factor based on the ultimate tensile strength of material. Will also require 2 Manuals or CAD Drawings. Must have Spring Applied/Hyd Release Brakes at all 3 vertical rotation axes. DATA PLATES: All instruction, data, and identification plates and labels attached to this equipment and its controls shall be manufactured of corrosion and oil resistant metal or plastic material. All wording shall be in the English language using plain, bold face lettering. Lettering shall be permanent and have a contrasting background.
2.0 SHIPPING
2.1 Shipping
2.1.1 RESPONSIBILITY: The contractor is responsible for delivery of the equipment to Crane Army Ammunition Activity (a tenant on Naval Surface Warfare Center). Adequate preserving of equipment surfaces, packing, marking, and skidding of materials for shipment shall be the responsibility of the contractor. If special lifting devices, such as hooks or eyes, are required for ease of handling, they shall be supplied with the equipment. Any special devices shall be returned to the contractor upon request only if they will not be required for future movement of the equipment, and at the contractor’s expense.
2.1.2 SHIPPING SCHEDULE: Be aware, CAAA receiving hours are 0700 - 1430 BY APPOINTMENT ONLY; Includes Inert & Freight All Kind (FAK); Mon - Thurs; appointments SHALL be made via Carrier Appointment System (CAS). Carriers without access to the CAS System, call (812) 854-2199 or (812) 854-2339, 48 hours prior to delivery for appointment. Failure to follow the protocol stated herein and/or obtain a scheduled delivery time prior to delivery, may result in the truck being turned away. THE CONTRACT NUMBER, CAAA DOCUMENT # W53W9LxxxTBDxxx, MUST BE ANNOTATED ON THE PACKING SLIP / BILL OF LADING.
2.1.3 RECEIVER: All shipments to Crane Army Ammunition Activity including installation tools and/or replacement parts, as well as the original shipment of the equipment, shall be marked “ATTN: Mr. Justin Cowell, JMCN-MED”. Items not correctly marked are subject to being returned at the vendor’s expense.
2.1.4 ARRIVAL INSPECTION: Upon receipt of equipment at Crane Army Ammunition Activity, a preliminary inspection shall be performed to determine any damage in transit (DIT) and/or count. This inspection shall be performed by Crane Army Ammunition Activity personnel.
2.1.5 DELIVERY TERMS FOR SYSTEM. Delivery of EMF machine/system is F.O.B. Destination to the following address:
W53W9L Crane Army Ammunition Activity ATTN: Justin Cowell Building 148 300 Highway 361 Crane, IN 47522-5001
File details come from the government source that posted it. Updated .