Appendix A___Kelsey Gun.pdf
PDF 125 KB Posted
- Attached to
- Kelsey Gun IRSC Federal contract opportunity
- Solicitation number
- 1282BH20R4001
About this file
This document contains the technical specifications for a federal timber services contract opportunity with the Department of Agriculture Forest Service R2-Rocky Mountain Region. The contractor will be required to perform four main tasks across various units totaling approximately 375 acres. Task 1 involves felling, yarding, decking, and removing non-sawtimber trees between 5.0-9.9 inches DBH for Douglas-Fir and Ponderosa Pine and 5.0-7.9 inches DBH for Engelmann and Blue Spruce. Task 2 is slash treatment which requires piling slash at landings. Task 3 is installing a 28 inch x 20 inch corrugated metal pipe 30 feet in length on National Forest System Road 536 at milepost 0.2. Task 4 is post-haul road maintenance to standards in Appendix C. The purpose of the project is to reduce wildfire risk and move the landscape toward a more ecologically resilient condition through activities such as thinning, piling, and mastication.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Past Performance Reference.docx | DOCX document | |
| Wage Determination - SCA - Laborer.pdf | ||
| Appendix C___Kelsey Gun.pdf | ||
| Wage Determination - SCA - Forestry.pdf | ||
| Appendix B___Kelsey Gun.pdf | ||
| Solicitation___Kelsey Gun.docx | DOCX document | |
| Experience Questionnaire.docx | DOCX document | |
| Map 1 of 3 - Contract Area___Kelsey Gun.pdf | ||
| Map 3 of 3 - Vicinity___Kelsey Gun.pdf | ||
| Map 2 of 3 - Traffic Control___Kelsey Gun.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Kelsey Gun IRSC Page 1 of 1
Pike and San Isabel NF APPENDIX A South Platte RD
Appendix A
TECHNICAL SPECIFICATIONS FOR SERVICE WORK ITEMS
ACTIVITY ITEMS– TASK DESCRIPTIONS:
Task 1 – Felling, Yarding/Skidding, Decking, and Removal:
Applies to CLIN 0001.
Sawtimber and non-sawtimber trees cut will be whole tree yarded to the landing, processed, decked, and removed.
All live and dead non-sawtimber trees not marked with orange paint above and below stump height (in accordance with Appendix B, K-C.3.5.6#), and meeting the diameter specifications listed in Table A, are designated for treatment.
Table A—
NON-SAWTIMBER FELLING DIAMETER SPECIFICATIONS
UNIT SPECIES REQUIREMENTS MAXIMUM STUMP HEIGHT
All
Douglas-Fir and Ponderosa Pine Diameter from 5.0 inches DBH to 9.9 inches DBH
12 inches above ground level Engelmann and Blue Spruce Diameter from 5.0 inches DBH to 7.9 inches DBH
Table B—
UNIT REQUIREMENTS
UNIT ACRES REQUIREMENTS
1 37
Non-sawtimber will be removed in all Units.
Mechanized product removal.
No biomass material will be treated.
Trees will be skidded with limbs and tops attached, and processed at the landings.
2 51 3 67 4 62 5 162 6 49
Task 2 – Slash Treatment:
Applies to CLIN 0001.
All Units: Slash will be piled at the landing. All requirements in H.23 Slash Treatment apply.
Task 3 – Pipe Install:
Applies to CLIN 0002.
28 inch x 20 inch squash diameter by 30 feet in length corrugated metal pipe. Installed on NFSR 536 at mile post 0.2.
Performance standards are outlined in Appendix C, Specification T-815 Culvert Installation.
Task 4 – Road Maintenance:
Applies to CLIN 0003.
Post-haul, (Pre-haul and During-haul, if awarded), road maintenance shall be performed to the standards and specifications in Appendix C, Road Maintenance Requirements.
File details come from the government source that posted it. Updated .