ALL ORDERING DATA.pdf

PDF 1 MB Posted Jul 13, 2026

Attached to: CAP SCREWS
Solicitation number: SPMYM226Q7717
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Jul 13, 2026

This document is a Material Ordering Data (MOD) specification sheet that provides detailed ordering requirements for fasteners across multiple part numbers and configurations.

The MOD establishes procurement specifications for socket head cap screws and related fasteners under two primary federal specifications: FF-S-86J (Federal Specification for Screw, Cap, Socket-Head) and MIL-DTL-1222J (General Specification for Studs, Bolts, Screws and Nuts for High-Reliability Applications). The document contains 17 distinct ordering data entries, each with unique Item Data Numbers (IDNs), covering various screw configurations. FF-S-86J items specify flat countersunk head screws in Type IV nickel-aluminum material with self-locking elements, ranging from 1/2" to 1" diameter with lengths from 1" to 4.5", all requiring locking elements per MIL-DTL-18240 Type N. MIL-DTL-1222J items specify socket head cap screws in nickel-copper-aluminum (NICUAL) Grade 500 material, both cylindrical and countersunk configurations, sized from 0.625" to 3/4" diameter with various thread series (8UNC-3A, 10UNRC-3A, 11UNC-3A, 13UNC-3A, and 16UNRC-3A). Material certification requirements include both chemical and mechanical testing, with sampling per specification requirements. Additional requirements mandate compliance with MIL-STD-129 container marking standards and reference DLA Procurement Note C20. All specifications require the latest revision at time of award, and the document was prepared by Michael Fyrqvist under code 250.9R.

View the file

Other files

File	Type	Posted
61341302-1303 drawing.pdf	PDF	Jul 13, 2026
6134130-1303 drawing.pdf	PDF	Jul 13, 2026
Solicitation SPMYM226Q7717.pdf	PDF	Jul 13, 2026
61341220 ALL CDRLS.pdf	PDF	Jul 13, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

All unit, intermediate, and shipping containers must be marked in accordance with MIL- STD-129. Refer to DLA Procurement Note C20 for further instructions.

Prepared By: Michael Fyrqvist

Code: 250.9R

MATERIAL ORDERING DATA

FF-S-86J

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

IDN: N4523A 6134-1221

ICN: 38JCD11205 KO: R09 KOI: 002

Paragraph 6.2 Ordering Data

A. FF-S-86J, FEDERAL SPECIFICATION SCREW, CAP, SOCKET-HEAD, dated 1 April 2025.

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

FLAT COUNTERSUNK HEAD 82°, TY-IV, NICUAL, 1/2" X 1-1/4" LG. SELF-LOCKING.

C. Title, document number and date including part number specified in accordance with military document (see 6.3): N/A

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL and MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): N/A

F. Cross drilling of cylindrical heads, if required (see 3.5.2): N/A

G. Thread series and class (see 3.5.4.3): 13 UNRC-3A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): N/A

I. Corrosion resistance testing, if required (see 4.2.6.1): N/A

J. Dimensional attributes, changes, or alterations (see 3.5.1): N/A

K. Sampling for destructive testing (see 4.2.5): PER THE REQUIREMENTS OF THIS SPEC

L. Sampling for chemical analysis (see 4.2.7): PER THE REQUIREMENTS OF THIS SPEC

Additional Requirements: LOCKING ELEMENT IAW MIL-DTL-18240 TY-N

Any specification that is referenced in this Material Order Data sheet is required to be to the latest

IDN: N4523A 6134-1222

ICN: 38JCD11205 KO: R14 KOI: 002

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

FLAT COUNTERSUNK HEAD 82°, TY-IV, NICUAL, 1/2" X 1-3/4" LG. SELF-LOCKING.

C. Title, document number and date including part number specified in accordance with military document (see 6.3): N/A

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL and MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): N/A

F. Cross drilling of cylindrical heads, if required (see 3.5.2): N/A

G. Thread series and class (see 3.5.4.3): 13 UNRC-3A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): N/A

I. Corrosion resistance testing, if required (see 4.2.6.1): N/A

J. Dimensional attributes, changes, or alterations (see 3.5.1): N/A

Any specification that is referenced in this Material Order Data sheet is required to be to the latest

IDN: N4523A 6134-1225

ICN: 38JCD11205 KO: R25 KOI: 001

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

FLAT COUNTERSUNK HEAD 82°, TY-IV, NICUAL, 1/2" X 1-1/2" LG. SELF-LOCKING.

C. Title, document number and date including part number specified in accordance with military document (see 6.3): N/A

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL and MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): N/A

F. Cross drilling of cylindrical heads, if required (see 3.5.2): N/A

G. Thread series and class (see 3.5.4.3): 13 UNC-2A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): N/A

I. Corrosion resistance testing, if required (see 4.2.6.1): N/A

J. Dimensional attributes, changes, or alterations (see 3.5.1): N/A

Any specification that is referenced in this Material Order Data sheet is required to be to the latest

IDN: N4523A 6134-1227

ICN: 38JCD11205 KO: R26 KOI: 001

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

FLAT COUNTERSUNK HEAD 82°, TY-IV, NICUAL, 1/2" X 1-1/2" LG. SELF-LOCKING.

C. Title, document number and date including part number specified in accordance with military document (see 6.3): N/A

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL and MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): N/A

F. Cross drilling of cylindrical heads, if required (see 3.5.2): N/A

G. Thread series and class (see 3.5.4.3): 13 UNC-2A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): N/A

I. Corrosion resistance testing, if required (see 4.2.6.1): N/A

J. Dimensional attributes, changes, or alterations (see 3.5.1): N/A

Any specification that is referenced in this Material Order Data sheet is required to be to the latest

IDN: N4523A 6134-1302

ICN: 38JCD11201 KO: R24 KOI: 001

Paragraph 6.2 Ordering Data

A. FF-S-86J, FEDERAL SPECIFICATION SCREW, CAP, SOCKET-HEAD, dated 1 April 2025.

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

TYPE IV, NICUAL, 1"-8UNC-3A X 4.50" LONG, SELF-LOCKING

C. Title, document number and date including part number specified in accordance with military document (see 6.3): NA

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL & MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): NA

F. Cross drilling of cylindrical heads, if required (see 3.5.2): NA

G. Thread series and class (see 3.5.4.3): 8UNC-3A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): NA

I. Corrosion resistance testing, if required (see 4.2.6.1): NA

J. Dimensional attributes, changes, or alterations (see 3.5.1): NA

K. Sampling for destructive testing (see 4.2.5): per spec

L. Sampling for chemical analysis (see 4.2.7): per sepc

Additional Requirements: MOD: Self-locking element per MIL-DTL-18240 type N, located per attached sketch:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest

IDN: N4523A 6134-1303

ICN: 38JCD11201 KO: R23 KOI: 001

Paragraph 6.2 Ordering Data

A. FF-S-86J, FEDERAL SPECIFICATION SCREW, CAP, SOCKET-HEAD, dated 1 April 2025.

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

TYPE IV, NICUAL, 1"-8UNC-3A X 4.50" LONG, SELF-LOCKING

C. Title, document number and date including part number specified in accordance with military document (see 6.3): NA

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL & MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): NA

F. Cross drilling of cylindrical heads, if required (see 3.5.2): NA

G. Thread series and class (see 3.5.4.3): 8UNC-3A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): NA

I. Corrosion resistance testing, if required (see 4.2.6.1): NA

J. Dimensional attributes, changes, or alterations (see 3.5.1): NA

K. Sampling for destructive testing (see 4.2.5): per spec

L. Sampling for chemical analysis (see 4.2.7): per sepc

Additional Requirements: MOD: Self-locking element per MIL-DTL-18240 type N, located per attached sketch:

MIL-DTL-1222

IDN: 4523A 6135-0203

ICN: 38JCD11205 KO: R05 KOI: 001

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS, SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN10C340NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw Type II Socket

Head Cap, Nicke Alloy Grade 500 Solution Annealed and Age Hardened

a. Configuration for socket head cap screws style:

Socket Head (cylindrical) (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 0.625" dia x 2.500" long

3. Thread series, and class of fit (see 3.9.1): 11UNC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

E. Type of coating and the minimum coating thickness for all internally-threaded fasteners, all externally-threaded fasteners with class 3A or 5 threads, and those externally-threaded fasteners with class 2A threads that need a thicker coating, when required: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type N

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

6.1 Intended use. Fasteners meeting this specification are intended for general, high temperature, high strength and corrosive environment applications where a high degree of reliability is required. It is designed to be used to acquire commercial off-the-shelf fasteners with added inspections to verify the high degree of reliability required. Fastener types and grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

IDN: 4523A 6135-0204

ICN: 38JCD11205 KO: R06 KOI: 001

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN10C340NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw Type II Socket

Head Cap, Nicke Alloy Grade 500 Solution Annealed and Age Hardened

a. Configuration for socket head cap screws style:

Socket Head (cylindrical) (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 0.625" dia x 2.500" long

3. Thread series, and class of fit (see 3.9.1): 11UNC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type N

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

IDN: 4523A 6135-0205

ICN: 38JCD11205 KO: R07 KOI: 001

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN10C340NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw Type II Socket

Head Cap, Nicke Alloy Grade 500 Solution Annealed and Age Hardened

a. Configuration for socket head cap screws style:

Socket Head (cylindrical) (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 0.625" dia x 2.500" long

3. Thread series, and class of fit (see 3.9.1): 11UNC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type N

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

IDN: 4523A 6135-0206

ICN: 38JCD11205 KO: R08 KOI: 001

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN10C340NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw Type II Socket

Head Cap, Nicke Alloy Grade 500 Solution Annealed and Age Hardened

a. Configuration for socket head cap screws style:

Socket Head (cylindrical) (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 0.625" dia x 2.500" long

3. Thread series, and class of fit (see 3.9.1): 11UNC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type N

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

IDN: 4523A 6135-1221

ICN: 38JCD11205 KO: R14 KOI: 001

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN8C332NCNN

1. Configuration, Type, Style, Grade & Condition (see 1.2): SCREW, CAP, SOCKET HEAD, COUNTERSUNK, TY-II, GR-500, SOLUTION ANNEALED &

AGE HARDENED.

a. Configuration for socket head cap screws style: Countersunk (82 deg)

(ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" DIA. X 2" LG.

3. Thread series, and class of fit (see 3.9.1): 13 UNC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided:

N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? No If yes, specification type/class: Select one:

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT): N/A

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: YES

Note to Engineer: If you select “yes”, specify additional requirements in the Additional

Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional

Data Requirements section.

Additional Data Requirements: Grade 500 (nickel-copper-aluminum) material shall comply with the Slow Strain Rate Tensile Test of QQ-N-286G, dated 7 Dec 2000.

All unit intermediate and shipping containers must be marked in accordance with MIL-STD-129.

Refer to DLA Procurement Note C20 for further instructions.

Any specification that is referenced in this Material Order Data sheet is required to be to the latest

IDN: N4523A 6135-1229

ICN: 38JCD11205 KO: R25 KOI: 002

B. Type, material, size and length or standard part numbering system (see 1.2, 1.2.1, 1.2.2 and 3.1):

FLAT COUNTERSUNK HEAD 82°, TY-IV, NICUAL, 3/8" X 1" LG. SELF-LOCKING.

C. Title, document number and date including part number specified in accordance with military document (see 6.3): N/A

D. Material certification, if required (see 3.1 and 4.3.4): CHEMICAL and MECHANICAL

E. Protective coating or surface treatment, if required (see 3.3): N/A

F. Cross drilling of cylindrical heads, if required (see 3.5.2): N/A

G. Thread series and class (see 3.5.4.3): 16 UNRC-3A

H. Banded structure inspection, if required (see 3.1.1 and 4.3.6): N/A

I. Corrosion resistance testing, if required (see 4.2.6.1): N/A

J. Dimensional attributes, changes, or alterations (see 3.5.1): N/A

IDN: 4523A 6135-1302

ICN: 38JCD11205 KO: R13 KOI: 001

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN12C332NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Type II Socket Head

Cap, NICUAL Grade 500 Solution annealed & age hardened, self-locking

a. Configuration for socket head cap screws style: Countersunk (82 deg)

(ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 3/4" diameter x 2.00" long

3. Thread series, and class of fit (see 3.9.1): 10UNRC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type N

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

IDN: 4523A 6135-1303

ICN: 38JCD11205 KO: R12 KOI: 001

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN12C332NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Type II Socket Head

Cap, NICUAL Grade 500 Solution annealed & age hardened, self-locking

a. Configuration for socket head cap screws style: Countersunk (82 deg)

(ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 3/4" diameter x 2.00" long

3. Thread series, and class of fit (see 3.9.1): 10UNRC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type N

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: YES

Note to Engineer: If you select “yes”, specify additional requirements in the Additional

Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional

Data Requirements section.

Additional Data Requirements: Grade 500 (nickel-copper-aluminum) material shall comply with the Slow Strain Rate Tensile Test of QQ-N-286G, dated 7 Dec 2000.

All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129.

Refer to DLA Procurement Note C20 for further instructions.

File details come from the government source that posted it. Updated Jul 13, 2026.