AK15942286.pdf
PDF 624 KB Posted
- Attached to
- Differential, Driving Axle
- Solicitation number
- SPRDL1-24-Q-0167
About this file
This document is a Special Packaging Instruction (DD Form 2169) for a federal contract opportunity. The contract is for a Differential, Driving Axle with NSN 2520-01-594-2286 and Manufacture Part Numbers A86015519 (3D6E9) and 18KP974 (75Q65). The basic quantity is 2 each with an option for an additional 2 each. The Solicitation Number is SPRDL1-24-Q-0167, and the Contracting Agency is the Defense Logistics Agency Land and Maritime. The contract is a 100% Total Small Business Set-Aside. The Special Packaging Instruction details the required preservation, cleaning, drying, packing, and marking for the item. It specifies the use of MIL-STD-2073-1D packaging methods, including the use of a reusable container, blocking/bracing, and an envelope. The document provides the specific dimensions, item quantities, and hardware requirements for the packaging.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL124Q0167.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
A86015519 (3D6E9) CARRIER ASSEMBLY 19207 AK15942286
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2520-01-594-2286 3/24/2011
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 515.0 25.269 29.0 X 31.5 X 47.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1D, METHOD 43
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-32033
MIL-STD-2073-1D 2-C 2 BLOCKING/BRACING: ASTM-D6199, SIZE: 18-1/2 X 22
14. DRYING 3-D 1 ENVELOPE: MIL-DTL-6060E, SIZE: 75 X 72
MIL-STD-2073-1D 4-E 1
CONTAINER: ASTM-D7478, TY II, CL 2, ST A
15. PACKING
SIZE:26 X 30 X 42
a. LEVEL A
MIL-STD-2073-1D & NOTE F
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 & NOTE G
17. NOTES/DRAWING
A. INSPECT, PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND
THE APPLICABLE CONTAINER SPECIFICATION.
B. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
C. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGES 2 - 4 FOR BLOCKING SIZES AND ORIENTATION.
D. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060. MATERIAL
USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BARRIER AT THE MOUNTING LOCATION USING MMM-A-
260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A
SUFFICIENT QUNATITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE
AIRTIGHT SEAL.
E. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D7478.
F. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
G. IN ADDITIONAL TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP
AND ONE SIDE WITH MINIMUM 1/2 IN HIGH BLACK LETTERS “REUSABLE CONTAINER, DO NOT
DESTROY.” IN ADDITION THE TOP AND ONE SIDE SHALL BE MARKED “REMOVE SCREWS TO OPEN
CONTAINER” USING MINIMUM ½ IN HIGH BLACK LETTERS.
http://www.dlis.dla.mil/webflis/pub/pub_search.aspx?niin=2520015942286&newpage=1
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188 SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
A86015519 (3D6E9) CARRIER ASSEMBLY 19207 AK15942286
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2520-01-594-2286 3/24/2011
ITEM SIZE QTY REFERENCE
A 18-1/2 X 22 BLOCKING/BRACING 2 ASTM-D6199
B 18-1/2 X 22 GASKET 2 MIL-DTL-6060E
C 18-1/2 “S” BRACKETS 4
BRACKETS ARE MADE FROM 3/8” THICK COMMERCIAL
GRADE FLAT STOCK. BRACKETS SHALL BE FORMED BY
BENDING NOT WELDING.
D 1/2" X 4” HARDWARE SET 4 HARDWARE SET CONSISTS OF: 1PC ½” X 4” CARRIAGE BOLT,
1PC ½” FLAT WASHER, 1PC ½” LOCK WASHER & 1PC ½” NUT
E 1/2" X 2” HARDWARE SET 4 HARDWARE SET CONSISTS OF: 1PC ½” X 2” HEXHEAD BOLT,
2PC ½” FLAT WASHER, 1PC ½” LOCK WASHER & 1PC ½” NUT
F 75 X 72 ENVELOPE 1 MIL-DTL-6060E
G 26 X 30 X 42 CONTAINER 1 ASTM-D7478, TY II, CL 2, ST A
ITEM C SIZES AND HOLE PLACEMENT
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
A86015519 (3D6E9) CARRIER ASSEMBLY 19207 AK15942286
ORIENTAION OF PART ON BRACKETS
PACKAGING BREAKDOWN
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
A86015519 (3D6E9) CARRIER ASSEMBLY 19207 AK15942286
ITEM A HOLE LOCATIONS
CONTAINER BASE HOLE LOCATIONS
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .