AK14631438 - panel vehicular ope June 2010.pdf
PDF 119 KB Posted
- Attached to
- DDAA SPI CONTAINERS COMBINED SYNOPSIS SOLICITATION Federal contract opportunity
- Solicitation number
- SP330023Q0202
- Issued by
- Defense Logistics Agency Distribution
About this file
This document is a special packaging instruction for a vehicular panel. It provides detailed specifications for cleaning, preserving, packing, marking, and inspecting the item for shipment. The panel must be wrapped in lens tissue, wrapping, and a sleeve according to the instructions. It is then to be placed in containers and a bag with corner pads before being packed in a cleated plywood box or reinforced shipping container depending on the preservation level required. The bill of materials lists the specific materials needed, including the lens tissue, wrapping, sleeve, containers, corner pads, and bag, along with their specifications. The related federal contract opportunity is a combined synopsis/solicitation from the Defense Logistics Agency Distribution seeking containers to meet these special packaging instructions for shipping the vehicular panel.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment SP3300-23-Q-0202-P0001.pdf | ||
| AK14068167 Aug 2022.pdf | ||
| AK99658029- dischargergrenade Nov 2019.pdf | ||
| Tab 10 - CSS SP3300-23-Q-0202.pdf | ||
| AK16918076 Display July 2023.pdf | ||
| AM9377768 - servomechanism traverse May 2010.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12388910 (19207) PANEL, VEHICULAR OPE 19207 AK14631438
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2510-01-463-1438 06/30/2010 C
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 35.1 3.396 23.4 X 20.9 X 12.0
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 42
13. CLEANING
MIL-STD-2073-1D
14. DRYING
MIL-STD-2073-1D
SEE THE NOTES
15. PACKING
a. LEVEL A
MIL-STD-2073-1D AND NOTE I
b. LEVEL B
MIL-STD-2073-1D AND NOTE I
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. ALL DIMENSIONS ARE IN INCHES UNLESS THEY ARE SPECIFIED OTHERWISE.
B. PLACE THE LENS TISSUE, ITEM 1, OVER THE OPTICAL SURFACES ON THE GAUGES.
C. WRAP THE PART WITH WRAP, ITEM 2. SECURE THE WRAP IN PLACE WITH TAPE.
D. PLACE THE SLEEVE, ITEM 3, INSIDE OF THE LIP OF THE WRAPPED PART, SUCH THAT THE SLEEVE
SURROUNDS THE GAUGES AND THE SWITCHES.
E. PLACE THE PREPARED PART FROM NOTE D INTO THE CONTAINER, ITEM 4.
F. CLOSE THE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
G. PLACE THE CONTAINER FROM NOTE F INTO A BAG, ITEM 6. CLOSE THE BAG BY HEAT SEALING.
H. PLACE THE CORNER PADS, ITEM 5, ON EACH CORNER OF THE BAGGED ITEM FROM NOTE F, AND THEN PLACE IT INTO A CONTAINER, ITEM 7. CLOSE THE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
I. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-
HDBK-774 MAY BE USED FOR GUIDANCE.
J. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-
1D AND THE APPLICABLE CONTAINER SPECIFICATION.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages
Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12388910 (19207) PANEL, VEHICULAR OPE 19207 AK14631438
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2510-01-463-1438 06/30/2010 C
SCORE LINE
FLUTE DIRECTION
1-3/4
11-1/2
26-1/2
52-1/2
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages
Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12388910 (19207) PANEL, VEHICULAR OPE 19207 AK14631438
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2510-01-463-1438 06/30/2010 C
BILL OF MATERIALS
ITEM
NUMBER
DESCRIPTION
SIZE
SPECIFICATION DATA
QTY.
1 LENS TISSUE 10 X 10 A-A-50177. 1
2 WRAP 43 X 24 A-A-3174. 1
3 SLEEVE SEE PAGE 2 ASTM-D4727, TYPE CF, CLASS DOM,
VARIETY DW, GRADE 350.
4 CONTAINER 18-3/8 X 15-7/8 X 6-1/2 ASTM-D5118, TYPE CF, CLASS DOM,
STYLE RSC-L, VARIETY SW,
GRADE 275.
5 CORNER PADS SEE PAGE 2 A-A-59136, CLASS 1, GRADE A,
TYPE I.
6 BAG 26 X 30 MIL-DTL-117, TYPE I, CLASS E,
STYLE 3.
7 CONTAINER 23 X 20-1/2 X 11-1/4 ASTM-D5118, TYPE CF, CLASS WR,
STYLE RSC, VARIETY DW,
GRADE V11c.
File details come from the government source that posted it. Updated .