09222-portland cement stucco.doc

SECTION 09222-PORTLAND CEMENT STUCCO

GENERAL

DESCRIPTION

A. Scratch and Brown Concentrate fiber reinforced stucco that is a factory blended formulation of portland cement, lime, fibers and proprietary ingredients. For use with jobsite added ASTM C 897 stucco sand and clean potable water.

SUBMITTALS

A. General: Supplier to submit:

1. Manufacturer’s technical information including installation instructions and recommendations.

2. Samples: Submit samples for approval. Samples shall be of materials specified and of suitable size as required to accurately represent each color and texture to be used on project. Prepare each sample using same tools and techniques for actual project application. Approved samples shall be maintained and available at job site.

PART 1 – PRODUCTS

1. 1

MANUFACTURERS

A. Stucco base and finish coats: El Rey Stucco, or approved equal 1.2

MATERIALS

A. Weather Resistive Barrier:

1. One layer of No. 15 (ASTM D 226-97a) Grade D paper, (or equivalent), over all new sheathing substrates; two layers are required over all wood sheathings or as required by current and local codes.

B. Fiber-reinforced portland cement stucco basecoat:

1. Manufacturer’s standard factory formulated, concentrate scratch and brown stucco basecoats consisting of portland cement, lime, fibers, and proprietary ingredients.

C, Finish coat, Cement Stucco:

1. Premium Colored Stucco: Colored stucco finish coat, consisting of portland cement, lime, properly graded aggregate, colorant and proprietary ingredients.

END OF SECTION 01040

PORTLAND CEMENT STUCCO

09222-1