EW_contract_maps.pdf

27 Acres (18x18’)

1/ Leave trees by preference are as follows: PP, WL, DF, LP, RC, AF, WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

13/ Hand pile or grapple pile all slash within 150 feet from open road.

Piles must be located at least 6 feet from leave trees and be a minimum of 4 ft x 4 ft x 8 ft in size with waterproof paper covering to top 1/3 of pile with material placed on top to prevent loss of paper due to wind.

14/ Retain a 10-foot wide live vegetation screen along open roads or within the unit that disrupts viewing into unit.

16 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

15/ Retention patches.

21 Acres (18x18’)

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

13/ Hand pile or grapple pile all slash within 150 feet from open road.

Piles must be located at least 6 feet from leave trees and be a minimum of 4 ft x 4 ft x 8 ft in size with waterproof paper covering to top 1/3 of pile with material placed on top to prevent loss of paper due to wind.

36 Acres (16x16’)

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

13/ Hand pile or grapple pile all slash within 150 feet from open road.

Piles must be located at least 6 feet from leave trees and be a minimum of 4 ft x 4 ft x 8 ft in size with waterproof paper covering to top 1/3 of pile with material placed on top to prevent loss of paper due to wind.

5 Acres (18x18’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from leave trees and fences.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

12 Acres (18x18’)

43 Acres (18x18’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

30 Acres (18x18’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

14/ Retain a 10-foot wide live vegetation screen along open roads or

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

12/ Leave a maximum of 2 leaning or hung up trees ( >4” DBH and >20’ long @ 30-60 degree angle) per acre for Great Grey Owl escape trees.

All other trees must not be hung up.

15 Acres (18x18’)

13 Acres (18x18’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

12/ Leave a maximum of 2 leaning or hung up trees ( >4” DBH and >20’ long @ 30-60 degree angle) per acre for Great Grey Owl escape trees.

All other trees must not be hung up.

37 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

13/ Hand pile or grapple pile all slash within 150 feet from open road.

Piles must be located at least 6 feet from leave trees and be a minimum of 4 ft x 4 ft x 8 ft in size with waterproof paper covering to top 1/3 of pile with material placed on top to prevent loss of paper due to wind.

6 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

19 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

14/ Retain a 10-foot wide live vegetation screen along open roads or

21 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

7 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

13 Acres (16x16’)

2/ Leave trees by preference are as follows: WP, PP, WL, DF, LP, RC, AF, WH, and GF.

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

24 Acres (16x16’)

WH, and GF.

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

14/ Retain a 10-foot wide live vegetation screen along open roads or

6 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

5/ No Hardwoods or brush species shall be cut.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

23 Acres (18x18’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

28 Acres (18x18’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

5/ No Hardwoods or brush species shall be cut.

7/ Clear all conifers <6” for LP and <7” all other species, except WL and WP, within QA stands or within 30 feet of a QA stand. A QA stand is defined as having five or live aspen trees greater than 10 feet tall within 15 feet of each other.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

35 Acres (16x16’)

WH, and GF. {Ignore all WP and PY.} 3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.

10/ Minimum required tree height for cutting is 1 Foot.

11/ Leave no cut trees hung up.

14/ Retain a 10-foot wide live vegetation screen along open roads or

21 Acres (18x18’)

WH, and GF.

3/ Leave all single ES of good form, unless such a tree is within 8 feet of another ES.

4/ Within 50 feet of the centerline of a stream channel, marsh or lake shift species preference to RC, WH, WP, PP, WL, DF, AF, LP, and GF {Do not cut any hardwood or brush species}. Do not cut or pile within 15 feet of stream channel.

6/ All alder and PB greater than 1 foot tall and less than 6 inches DBH will be cut 4 feet around WL leave trees.

8/ Lop and scatter required when slash accumulations exceed 2 feet in depth. Slash will be cut in to lengths of 5 feet or less. Slash shall be pulled back 2 feet from unit boundaries, streams, trails and 6 feet from fences.

9/ Stump heights must not exceed 6 inches.