Amendment_0002.pdf

PDF 139 KB Posted

Attached to
Twin Engine Airplane Purchase Federal contract opportunity
Solicitation number
AG-024B-S-17-0004
Issued by
Department of Agriculture Forest Service Fire and Aviation Management National Interagency Fire Center

About this file

Amendment 0002

View the file

Other files for this federal contract opportunity

Other files attached to Twin Engine Airplane Purchase, newest first.
File Type Posted
Amendment_0003.pdf PDF
Solicitation_AG-024B-S-17-0004_Final_Amend_0001.pdf PDF
Questions_and_Responses.pdf PDF
Amendment_0001.pdf PDF
Solicitation_AG-024B-S-17-0004.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

Amendment 0002 August 11, 2017

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

U.S. FOREST SERVICE - CONTRACTING

NATIONAL INTERAGENCY FIRE CENTER

OWYHEE BLDG – MS 1100

3833 S DEVELOPMENT AVE

BOISE ID 83705-5354

Same as Item 6

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION NO.

AG-024B-S-17-0004

9B. DATED (SEE ITEM 11)

July 14, 2017

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM APPLIES ONLY TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK

ONE

A. THIS CHANGE ORDER IS PURSUANT TO: (specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

A. Paragraph B.7(b)(1): Change the paragraph to read:

The installation of additional equipment and/or modification of the aircraft to meet the specifications of this contract shall be completed in accordance with 14 CFR requirements and manufacturer's recommendations or engineering data and be FAA approved by the TCDS, STC or FAA form 337 with supporting FAA Form 8110‐3 and all DER supporting engineering substantiation documentation. The Government will be provided full rights to all alteration/modification data.

B. Paragraph B.6(e)(1)(iv)(B) Delete “without ridges or tape lines” from the end of the paragraph.

C. Replacement page provided with changes noted by bold and italicized text.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

MICHAEL MCFARLANE, Contracting Officer 15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

208-387-5695

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed By GSA FAR (48 CFR) 53.243

Solicitation No. AG-024B-S-17-0004, Amendment 0001 U.S. Forest Service Aircraft Purchase National Office

SECTION B

SCHEDULE OF ITEMS

provided the color and quality is very similar to the colors and brands below:

(1) Sherwin-Williams, Jet-Glo Polyurethane

(2) Base: White 7067 - Jet-Glo CM0570726

(3) Light Gray: Gray 707 - Jet-Glo 01529

(4) Orange: Bright Poppy - Jet-Glo 00304

(5) Black: Black: Semi- Gloss Black - Jet-Glo 07491

(iii) Specifications:

(A) All liquid filler openings shall be marked near each opening with the identity of the fluid, the octane rating or grade, if applicable, and the amount in U.S. quarts or gallons.

(B) Contrasting paint(s) shall be applied to the camber side of the propeller blade tips. At a minimum, the area from the tip to approximately six inches inboard on each blade shall be contrasting.

(iv) Workmanship:

(A) All painting shall be accomplished in accordance with the paint manufacturer's recommendations or instructions and the approved paint scheme.

(B) Where colors intersect or join, each color shall be cut carefully to form a neat straight line without ridges or tape lines.

B.7 CONTINUED AIRWORTHINESS AND MAINTENANCE

(a) Type Design:

(1) The airplane will be delivered meeting all requirements of the FAA approved Type Design.

(b) Equipment Installation:

(1) The installation of additional equipment and/or modification of the aircraft to meet the specifications of this contract shall be completed in accordance with 14 CFR requirements and manufacturer's recommendations or engineering data and be FAA approved by the TCDS, STC or FAA form 337 with supporting FAA Form 8110‐3 and all DER supporting engineering substantiation documentation. The Government will be provided full rights to all alteration/modification data.

(c) Maintenance and Service Instructions:

File details come from the government source that posted it. Updated .