AF PRODUCT DESCRIPTION_TMX7510 02Jun2021.pdf

U.S Air Force

Product Description and Specifications for

TMX7510-256GB-

Monocrome Phantom Camera with FAST

Option

02 Jun 2021

Description and Specifications

The Phantom TMX 7510 is an ultra-high-speed camera to utilize back side illumination. The TMX 7510 has 75 Gigapixel throughput which can provide over 76,000 fps at a full 1 Mpx resolution of 1280 x 800. At reduced resolutions the camera will record at over 770,000 fps in standard mode and up to 1.75M fps and 95ns in with the FAST mode.

Requirements:

The camera is available with multiple options. The table below lists the options desired at Explosive Ordnance Test Lab.

Camera Options Spectrum RAM Size Lens Kit

TMX 7510

Includes FAST Option (Export controlled)

Non-Cinemag Variant

MONO 256 GB

Nikon F-mount standard, supports F & G style lenses

Canon EOS mount package

Ships Standard with: Power supply 400W w/ XLR cable, Ruggedized Ethernet cable, BNC cable, Phantom PCC software, Getting Started Guide, Rugged case with custom foam for protection

In addition, due to the environment in which these cameras are tested, EOTL is requesting adding a 4-year service package (on top of the 1-year included with camera purchase) to allow the Contractor to provide management, labor, tools, parts, materials, and equipment necessary to perform yearly inspections, maintenance and repairs of two (2) TMX7510 Phantom manufactured Ultra high-speed cameras to original manufacturer specification operational functionality. These services shall be performed at the Contractors facility.

1.0 Design Specification

The design specification of the camera is dictated by the test objective. In order to improve the ability to characterize and understand munition blast and fragmentation performance, EOTL collects optical data of the case surface of munitions. The use of ultra-high speed cameras, calibrated as a stereo-pair, allows for the collection of the 3D position of many points on the bomb surface over time. The cameras will be protected in a hardened box behind cement blocks. These cameras will be approximately 50 feet away from the detonation. Two disposable mirrors will be arranged such that the cameras will have an approximate 100 to 150mm focal length ensuring the field of view spans the entire length of the bomb (50” to 75”, depending on munition, 20” high). The relationship between pixel resolution and frame rate will be balanced such that the most data will be captured. In addition, camera synchronization or delay will need to be minimized to ensure frame delay does not interfere with data collection.

The following describes the necessary attributes of the camera to meet the test objective.

Throughput 75 Gpx/second Sensor Most pixels available as possible (1280 x 800 preferred), 12-bit depth, Monochrome Exposure 95 ns minimum exposure with FAST option, Extreme dynamic range Memory Larger than or equal to 256 GB internal RAM Additional Features

Continuous recording, frame timestamp, Internal mechanical shutter for automatic/remote Current Session Reference (CSR), Field-based firmware upgrade capable

Triggering Programmable trigger location (pre/post trigger recording), Image-Based Auto-Trigger standard, Trigger from software, Hardware trigger BNC

Timing and Synchronization

Frame synchronization to internal or external clock (FSYNC), IRIG in/out, Ready output (high when camera is armed and ready to record), Strobe output (low during frame exposure time)

Connectivity Gb Ethernet or 10Gb Ethernet Camera Control Native software or on-camera controls Video Out HD-SDI ports available Lensing Support Nikon F-mount standard, supports F & G style lenses and Canon EOS mount

Video Processing

Ability to adjust Brightness, Gain, Gamma, Saturation, White Balance, Pedestal, Tone curve, Filters, Color matrix, Image flip and rotate, Crop, Scale

Supported Video Files

Raw (uncompressed file), AVI, Multipage TIFF, BMP, JPEG, JTIF RAW, etc.

Power 100-240VAC Operating Specifications

Temperature: -10 to +50 C Shock Operational: MIL-STD-202H Method 213-B. Rated 30G, sawtooth wave, 11 ms, +/- 10 pulses all axes.

Vibration: MIL-STD-202H Method 214-i; Test Condition A. Rated 5.3 Grms; 15 min/axis Safety: IEC 60950-1

Mechanical Size

Less than 12” by 12” by 12” (not including any handles), less than 30 lbs

2.0 Description of Support Work

2.1 Annual Routine: The Contractor shall perform an annual comprehensive evaluation and maintenance of two (2) Ultra high-speed cameras.

2.1.1 The Contractor shall identify to Government Customer Representative (GCR) repair work required outside of annual maintenance that falls in the tier I and tier II definition as identified in section 2.3.

2.1.2 The Contractor shall provide a Contractor format Return Material Authorization (RMA) form with an RMA number, camera information and case ID.

2.1.3 The Contractor shall provide new Original Equipment Manufactured replacement parts.

2.1.4 The Contractor shall calibrate the equipment to factory specifications.

2.1.5 The Contractor shall provide a Contractor format RMA Report identified in section 2.7 once services are completed.

2.2 AS REQUIRED: The Contractor shall perform as requested and when required/necessary by the GCR a comprehensive evaluation and diagnosis of Ultra high-speed camera/cameras model number: TMX 7510.

2.2.1 The Contractor shall identify repair if the repair work required falls in the tier I and or tier II definition as identified in section 2.3.

2.2.2 The Contractor shall provide a Contractor format Return Material Authorization (RMA) form with an RMA number, camera information and case ID.

2.2.3 The Contractor shall provide new Original Equipment Manufactured replacement parts.

2.2.4 The Contractor shall calibrate the equipment to factory specifications.

2.2.5 The Contractor shall provide a Contractor format RMA Report identified in section 2.7 once services are completed.

2.3 Special Requirements & Definitions

2.3.1 The Ultra high-speed cameras shall be operational and serviceable after completion of repair.

2.3.2 Annual Equipment Maintenance: The Contractor shall perform Services to include cleaning of sensor and camera body, removal of loose debris, manual testing, automated functional testing, final inspection, calibration, camera firmware updates and back focus adjustment on cameras to ensure camera is performing optimally.

2.3.3 Equipment Service: The Contractor shall perform required diagnostic sand service to on cameras to ensure camera is performing optimally. The Contractor will address customer issues that result in replacement of parts such as fans or shutters, updates of memory or sensor boards, etc. The camera is either placed into a low-level or high-level maintenance tier depending on the parts and labor associated with addressing the customer issue. Under a support plan, either level is covered. The camera will be confirmed functional by performing calibration and function/thermal testing, final inspection, calibration, camera firmware updates and back focus adjustment after the repair is made.

2.3.3.1 Tier I (low-level covered) services defined as follows:

Replacement of parts such as fans or shutters, updates of memory or sensor boards, etc. to ensure camera is performing optimally. Camera will be confirmed functional by performing calibration and function/thermal testing, final inspection, calibration, camera firmware updates and back focus adjustment after the repair is made.

2.3.3.2 Tier II (high-level) service defined as follows:

Any equipment repairs of equipment which has been disassembled, repaired, tampered with, altered, changed or modified by persons other than authorized service personnel, unless such service/repair by others is made with the written consent of Contractor. Any equipment repairs of defects or damage to equipment resulting from wear, tear, misuse, negligence, improper storage, transit, non-performance of normal maintenance tasks, battery leakage, or use of incompatible accessories.

2.3.4 At completion of repair the Contractor shall return the Government Furnished Property (GFP) to HAFB GCR identified in paragraph 3.

2.4 Delivery Timeframes: The GFP shall be maintained and/or repaired and returned to the Government no later than (NLT) the following timeframes identified below:

2.4.1 2 The government shall ship the GFP to the Contractor for evaluation, maintenance and/or repair. Once Ultra high-speed camera(s) are maintained and/or repaired and calibrated the Contractor shall ship GFP to Government GCR identified in section 3.

2.4.2 Annual Maintenance: 8 weeks after receipt of GFP.

2.4.3 As required deliveries:

2.4.3.1 Tier I services NLT 8 weeks after receipt of GFP.

2.4.4 Tier II services NLT 12 months after receipt of GFP.

2.4.5 GFP can be sent in at different time frames through the year and may not all require the same level of service.

2.5 Security Requirements: Contractor shall be responsible for safeguarding all government property provided to the Contractor.

2.6 Quality Assurance. The Contractor shall inform the Contracting Officer in writing when discrepancies occur and will request corrective action. Any matter concerning a change to the scope, prices, terms or conditions of this contract shall be referred to the Contracting Officer.

2.7 Records. The Contractor shall provide a written repairable item inspection report (244 forms) to include all repair work accomplished (CDRL A001). If additional request is made by the Government, the Contractor shall provide the original record or a reproducible copy of any such record within five working days of receipt of the request.

3.0 CONTRACTUAL REQUIREMENTS

The following person has been designated the Government Customer Representative by the Contracting Officer. The camera should be shipped to the location below.

ORGANIZATION: 582 MMXS/MXDTA Explosive Ordnance Test Laboratory ADDRESS: 6262 Ironwood Lane, Building 1642, Hill AFB UT 84056