A19- Sol SPRBL1-22-Q-0007 Diesel Gen Set 2022 01 19.pdf

REQUEST FOR QUOTATION This RFQ is is not a small business set-aside Page Of

(This is NOT an Order)

1. Request No. 2. Date Issued 3. Requisition/Purchase Request No. 4. Cert For Nat Def. Under BDSA Rating

See Schedule Reg. 2 and/or DMS Reg. 1 5A. Issued By 6. Deliver by (Date)

See Schedule

7. Delivery

FOB Other Destination

5B. For Information Call: (Name and telephone no.) (No collect calls)

8. To: Name and Address, Including Zip Code 9. Destination (Consignee and address, including Zip Code)

See Schedule

10. Please Furnish Quotations to the Issuing Office in Block 5A On or Before Close of Business (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please indicate on this form and return it to the address in Block 5B. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services.

Supplies are of domestic origin unless otherwise indicated by quoter. Any interpretations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. Schedule (Include applicable Federal, State, and local taxes)

Item Number (a)

Supplies/Services (b)

Quantity (c)

Unit (d)

Unit Price (e)

Amount (f)

(See Schedule)

12. Discount For Prompt Payment a. 10 Calendar Days b. 20 Calendar Days c. 30 Calendar Days d. Calendar Days % % % Number Percentage

NOTE: Additional provisions and representations are are not attached.

13. Name and Address of Quoter (Street, City, County, State and 14. Signature of Person Authorized to Sign 15. Date of Quotation Zip Code) Quotation

16. Signer

a. Name (Type or Print) b. Telephone

Area Code

c. Title (Type or Print) Number

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 18 (Rev. 8-95) PREVIOUS EDITIONS NOT USABLE 18-118 Prescribed by GSA-FAR (43 CFR) 53.215-1(a)

X

SPRBL1-22-Q-0007 2022JAN19 DOA7

SPRBL1DLA LAND AT ABERDEEN

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

ROY L. HARDY (443)858-7743

CCAP-ZLAA

EMAIL: ROY.HARDY@DLA.MIL

X

2022JAN25

1 14

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: ROY L. HARDY

Buyer Office Symbol/Telephone Number: CCAP-ZLAA/(443)858-7743

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

This acquisition is a Simplified Indefinite-Delivery Contract (SIDC) under the Simplified Acquisition Threshold (SA

1. RFQ SPRBL1-22-Q-0009 is for the following NSN to support the Warfighter Information Network-Tactical Increment 2, WIN-T INC 2.

Estimated Value: [$190,000]

NSN [6115-01-692-0745]

Nomenclature:Generator Set, Diesel

Best Estimated Quantity:

Year 1 [7]

Year 2 [2]

Year 3 [1]

Contract Maximum: [$250,000]

Guaranteed Minimum: [$20,000]

Duration: [Three(3)Year Base, no options]

Approved Source(s):

Manufacture Datapath Incorporated, (DPI)

CAGE code: 1BPK0 Part Number 987-0002-738 _______ ____________

*** END OF NARRATIVE A0001 ***

THIS ACQUISITION IS BEING CONDUCTED UNDER SPECIAL EMERGENCY PROCUREMENT AUTHORITY (SEPA)________________________________________________________________________________________

DLAD Procurement Notes Incorporated By Reference (JUN 22 2018)______________________________________________________________

This solicitation/purchase order incorporates one or more DLAD Procurement Notes by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.

DLAD TECHNICAL AND QUALITY REQUIREMENTS INCORPORATED BY REFERENCE (MAY 22 2018) _______________________________________________________________________________

This solicitation/purchase order incorporates one or more DLAD Technical and Quality Requirements by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Technical and Quality Requirement may be accessed electronically at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.

COVERED DEFENSE INFORMATION (CDI)_________________________________

Note regarding DFARS 252.204-7008 and DFARS 252.204-7012: The Government is not including or identifying CDI at this time does not constitute a lack of CDI for this solicitation/award.

2 14

SPRBL1-22-Q-0007

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Part I INSTRUCTIONS FOR SUPPLIERS AND EVALUATIONS OF OFFERS

1. This solicitation, called DLA Land at Aberdeens Master Solicitation for Acquisitions Using Simplified Acquisition Procedures (herein referred to as the Aberdeen Master Solicitation), is used by the DLA Land at Aberdeen contracting office to issue requests for quotations (RFQ) and awards of purchase orders for acquisitions up to the simplified acquisition threshold (SAT). Suppliers are required to read this Aberdeen Master Solicitation and all applicable documents and comply with terms and conditions established. Updated

Aberdeen Master Solicitations will be identified by a date and revision number.

2. The Aberdeen Master Solicitation contains multiple parts. Part I instructs suppliers in the submission of quotations and award evaluation. Part II contains the mandatory provisions and clauses, conditional provisions and clauses, and procurement notes that apply to the RFQs and purchase orders. Provisions, clauses, and procurement notes are incorporated by reference. They have the same force and effect as the full text.

NOTE: In some cases, clauses incorporated in Part II will appear in solicitation and award documents. When a conflict arises, the provisions and clauses in the main solicitation or award document will take precedence over the version listed in Part II of the

Aberdeen Master Solicitation.

3. Instructions for Offerors

a) SUBMITTING QUOTATIONS: Contractor shall submit the solicitation electronically to the point of contact (POC) identified on the solicitation document. Quotes via any other method will not be considered for award.

b) RETURN DATE AND TIME: The time for receipt of quotations will be on the solicitation and the Government Point of Entry. In case of a conflict, the later of the two times will be used.

c) LATE QUOTATIONS: Quotations received after the return date/time for automated solicitations may be considered until the evaluation process begins. Once the evaluation process begins, late quotations will only be considered if the contracting officer determines that considering the late quotation is in the best interest of the Government and would not unduly delay the award.

d) QUOTATION REVISIONS: Suppliers may revise quotations up until the time the solicitation is awarded by contacting the point of contact on the solicitation document.

e) QUOTATION WITHDRAWAL: Suppliers may withdraw quotations until the time the solicitation is awarded by contacting the point of contact on the solicitation document.

(f) SET-ASIDE SOLICITATIONS: Solicitations with an estimated dollar value between the micro

-purchase threshold and the SAT are set-aside for small business when cited in the solicitation. When a solicitation is set-aside, only small business quotations that comply with the non-manufacturer rule will be considered. See FAR 19.502-2(c) for an explanation.

(g) SOLICITATIONS WITH FAT REQUIREMENTS: This procurement MAY include First Article Testing (FAT) requirements. FAT waivers are ___ discussed in Section E of this solicitation. FAT requirements are listed in Section B of this solicitation and described in Section J

Exhibit A of this solicitation. FAT evaluations are discussed in Section M of this solicitation.

h) QUANTITY REQUIREMENTS: Quotation must be submitted on the total quantity of each item.

i) DELIVERY REQUIREMENTS: The Government required delivery will be stated in days after date of order (ADO). If the supplier is not able to meet the delivery requirement, the supplier must submit their delivery timeframe on the solicitation document in section B in number of days ADO. This includes time to deliver production quantity, required testing, and government inspection and acceptance. If a FAT is required, the supplier must also comply with the FAT delivery requirement and if unable to comply, must submit their delivery timeframe on quote page in number of days ADO. This includes time to deliver the completed test report (if contractor FAT).

j) SURPLUS: Surplus offers will not be considered.

k) Questions regarding the solicitation should be referred to the POC on the solicitation document or the POC identified in the

Government Point of Entry (https://beta.sam.gov ) .

4. Evaluation of Quotations

a) Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the

Government. Past performance, offered delivery, and price will be evaluated when making a comparative assessment of quotes. An award may

3 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

be made to other than the lowest priced, technically acceptable, responsible offeror(s).

b) ALTERNATE OFFERS: Alternate offers will not be considered for award. Alternate offers may be submitted to the POC identified in the solicitation for evaluation for future procurements.

c) NOTICE OF AWARD: Purchase orders are based on a submitted quotation. Suppliers are requested to notify the administrative contracting officer, within 14 days after receiving the notice of award, when they will not perform in accordance with a purchase order. Failure to provide prompt notice will adversely affect your past performance evaluation if the purchase order is later cancelled at other than the

Governments request.

Part II PROVISIONS, CLAUSES, AND PROCUREMENT NOTES, TECHNICAL AND QUALITY MASTER LIST OF REQUIREMENTS______________________________________________________________________________________________________

The following websites are provided to suppliers to obtain the full text of the FAR, DFARS, and DLAD provisions, clauses, and

Procurement Notes listed below: https://www.acquisition.gov , http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html , http://www.dla.mil/hq/acquisition/offers/DLAD.aspx and http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx .

All provisions, clauses, and procurement notes are incorporated herein by reference with the same force and effect as if set forth in full text, and made a part of the solicitation/order as applicable. The submission of a quotation in response to a RFQ that references this document constitutes the suppliers compliance with the representations and certifications and acceptance of the individual clauses, provisions, and procurement notes incorporated by reference herein. Certain representations and certifications may be required as part of a quotation. Please complete these representations and certifications in the solicitation document. Please review additional representations and certifications within the System for Award Management. Suppliers are reminded that all provisions incorporated herein by reference remain binding in their entirety. Any penalties for misrepresentation contained in the reference clauses and provisions apply.

SUBPART A Mandatory FAR, DFARS, and DLAD Provisions and Clauses _____________________________________________________

Please refer to Part II, Subpart A of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

SUBPART B Conditional FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart B of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of conditional

FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for

Automated Simplified Acquisitions in effect at the time of award.

SUBPART C Procurement Notes _________________

Please refer to Part II, Subpart C of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for

Automated Simplified Acquisitions in effect at the time of award.

SUBPART D- Technical and Quality Requirements ___________________________________

Please refer to Part II, Subpart C of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, DLAD Provisions, and Clauses AND Technical and Quality Master List of Requirements. The DLA Master Solicitation for Automated

Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

H06 Simplified Indefinite-Delivery Contract (SIDC) Below the Simplified Acquisition Threshold (SAT) (SEP 2021)\~\~

(1) The Government will award an a unilateral SIDC resulting from this request for quote (RFQ) to the responsible offeror whose quote\~conforms to the terms and conditions in the (RFQ) and will be most advantageous to the Government, after considering price and other factors.\~This initial unilateral SIDC is referred to hereafter as the basic SIDC.\~

(2) Pricing of orders. The unit price for orders is based on the price for the quantity range that will cover the total quantity on the order, regardless of destination.\~

(3) Price evaluation will be based on the price quoted for the estimated annual demand in the schedule.\~

(4) Acceptable contractor performance on the initial task or delivery order creates the SIDC below the SAT, and constitutes agreement by the contractor to accept additional orders under the same terms and conditions specified in the basic SIDC. The guaranteed minimum quantity stated in the basic SIDC becomes applicable at this point.\~

4 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(5) Once the guaranteed minimum quantity stated in the basic SIDC is met, the Government is under no obligation to place additional orders. The Government may place additional orders for the period of performance stated in the basic SIDC, effective from the award date of the basic SIDC. All additional orders will reference the basic SIDC, which documents the terms and conditions of the SIDC. The basic

SIDC states the maximum value of each task or delivery orders under the SIDC. The maximum value of the SIDC will not exceed the SAT; or, for SIDCs using FARS\~Subpart 13.5, the thresholds in 13.500(a).\~

(6) Pricing of orders. The unit price for orders is based on the price for the quantity range that will cover the total quantity on the order, regardless of destination, if applicable.

ORDERING: In the event two or more orders are placed for the same NSN on the same delivery schedule within a 60 calendar day timeframe, the orders will be combined, and the Government will receive the price benefit of the larger combined quantity as if the orders had been placed at the same time. In the event of this occurrence, the Contracting Officer will adjust the unit prices accordingly on the delivery orders in question. Delivery Schedules will be unaffected by the combination of the orders described herein. Orders that are placed on the same NSN on the same delivery schedule within a 60 calendar day timeframe that cross over two contract years are subject to the order combination and price adjustment provision above, the pricing on the schedule for the earlier contract year will apply for the combined quantity.

Accelerated Delivery is authorized and encouraged at no additional expense to either party.

Early and partial shipments at no additional cost the Government are acceptable/authorized/encouraged.

*** END OF NARRATIVE A0002 ***

NAICS CODE: 335312 ______

Size Standard: 750 Employees _____________

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM applies to this solicitation.\~

See http://www.sba.gov/content/table-small-business-size-standards for the corresponding small business size standard.

*** END OF NARRATIVE A0003 ***

5 14

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

1001 Production Quantity $ ___________________ __________________

See Range Pricing

NSN: 6115-01-692-0745

COMMODITY NAME: GENERATOR SET, DIESEL

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 1BPK0

Mfr Part Number: 987-0002-738

PROGRAM YEAR: 1

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 7 $

8 11 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

REFER TO TECHNICAL REQUIREMENTS DOC (TRD)

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

2001 Production Quantity $ ___________________ __________________

See Range Pricing

NSN: 6115-01-692-0745

COMMODITY NAME: GENERATOR SET, DIESEL

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 1BPK0

Mfr Part Number: 987-0002-738

6 14

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

PROGRAM YEAR: 2

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 7 $

8 11 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

REFER TO TECHNICAL REQUIREMENTS DOC (TRD)

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

3001 Production Quantity $ ___________________ __________________

See Range Pricing

NSN: 6115-01-692-0745

COMMODITY NAME: GENERATOR SET, DIESEL

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 1BPK0

Mfr Part Number: 987-0002-738

PROGRAM YEAR: 3

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 7 $

8 11 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

REFER TO TECHNICAL REQUIREMENTS DOC (TRD)

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

7 14

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

8 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

C01 Superseded Part Numbered Items (SEP 2016)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

C03 Contractor Retention of Supply Chain Traceability Documentation (SEP 2016)

C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)

*** END OF NARRATIVE C0001 ***

PACKAGING AND MARKING

SECTION D Packaging and Marking________________________________

Refer to Section B for packaging and marking requirements.

PACKAGING: Packaging shall be in accordance with, (IAW):_________

ASTM D 3951-18, MIL-STD-2073-1E, Special Packing Instructions, (SPI), or as otherwise specified.

The packaging requirements may also be included in the Technical Requirements Document (TRD), if included under Section J.

MARKING: Marking shall be IAW MIL-STD-129R (1)._______

GENERAL:_______

Level of Preservation (LOP): Military

Level of Pack (LPK): Military

Quantity Unit Pack (QUP): 001.

*** END OF NARRATIVE D0001 ***

INSPECTION AND ACCEPTANCE

E06 Inspection and Acceptance at Source (JUN 2018)

Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below.

The contractor shall indicate the location where supplies will be inspected, if different from the production location:

Commercial and Government Entity (CAGE) code:________________________________

Address:_____________________________________________________________________

Applicable to contract line item numbers(s) (CLIN(s)):_______________________

The contractor shall indicate the location where packaging will be inspected, if different from the production location:

9 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

( ) Same as for supplies OR

CAGE code: __________________________________________________________________

Address: ____________________________________________________________________

Applicable to CLIN(s): ______________________________________________________

The contractor shall indicate the location where supplies will be accepted, if different from the inspection location:

Commercial and Government Entity (CAGE) code:________________________________

Address:_____________________________________________________________________

Applicable to contract line item numbers(s) (CLIN(s)):_______________________

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

The inspection location for supplies is the awardees CAGE CODE address unless otherwise indicated in the contract/purchase order.

Inspection will be conducted by the Governments Quality Assurance Representative (QAR). Inspection of packaging, if required, may be conducted at the packaging location cited in the award.

SECTION I (All Awards)

a. Objective evidence of conformance with all contract quality assurance requirements must be present at the inspection location. When requested, manufacturer drawings and technical information and complete records of all inspection work performed to verify that the supplies meet technical requirements shall be provided. If required to determine conformity with contract requirements, subcontractor records shall also be provided.

b. Objective evidence to establish the location of the actual manufacturing source may also requested to confirm the end product country of origin and/or business size of the manufacturer.

c. If the supplier is not the manufacturer of the supplies, objective evidence must be furnished to establish the supplies were produced by an approved manufacturer o approved source.

d. The QAR is required to notify the Post Award Administrator (PCO), if at time of Government Source Inspection (GSI), the QAR is denied access to the offerors facility. If supplies being provided are described only by manufacturers name/CAGE Code and part number, objective evidence must be furnished to establish that the supplies were manufactured under the direction of or under agreement with the

CAGE Code of the part number offered.

e. The QAR may require additional examinations and tests to determine:

i. Completeness of item

ii. Material is new and unused

iii. Absence of rust

iv. Contamination, or deterioration

v. Correct identification/item marking 824 vi. Correct packaging

vii. Absence of any damage

viii. Compliance with preparation for delivery

(End of TQ Requirement)

*** END OF NARRATIVE E0001 ***

DELIVERIES OR PERFORMANCE

GOVERNMENTS DESIRED DELIVERY

NSN: 6115-01-692-0745

CLIN: 1001,2001 & 3001 ________________

7 EA 180 days after receipt of order and 100 each every 30 days thereafter until completion.___ _____ __

OFFERORS PROPOSED DELIVERY

10 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CLIN ____________________

____________ EA ____________ days after receipt of order and ___________ each every ___________ days thereafter until completion.

*** END OF NARRATIVE F0001 ***

11 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

The following clauses may apply as prescribed. Applicable clause version is the current version at time of award:

FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions

FAR 52.225-13 Restrictions on Certain Foreign Purchases

FAR 52.246-26 Reporting Nonconforming Items

DFARS 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

DFARS 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism

DFARS 252.225-7974 Representation Regarding Business Operations with the Maduro Regime (Deviation 2020-O0005)

*** END OF NARRATIVE I0001 ***

12 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Exhibit A EXHIBIT A TECHNICAL REQUIREMENTS DOC (TRD) 18-JAN-2022 099

Attachment 0001 TRACEABILITY DOCUMENT 18-JAN-2022 002

13 14

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

INSTRUCTIONS FOR OFFERORS

Refer to Narrative A, Number 3 Instructions for Offerors

*** END OF NARRATIVE L0001 ***

EVALUATION FACTORS FOR AWARD

EVALUATION OF QUOTATIONS

Refer to Narrative A, Number 4 - Evaluation of Quotations

The price evaluation as described in section A will be conducted as follows:

1. Each quantity range receives a weighting as assigned weighting:

1-3 RANGE 1 - 30%

4-7 RANGE 2 - 50%

8-11 RANGE 3 - 20%

2. Each proposed unit price will be multiplied by its corresponding weighting. This is the range weighted unit price.

3. The range weighted unit prices will be summed. This is the CLIN unit price.

4. The CLIN unit prices for each year will be summed to establish the total evaluated price

*** END OF NARRATIVE M0001 ***

14 14