A14-RFQ-75D30126Q79194__.pdf

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER)

THIS RFQ IS X IS NOT A SMALL BUSINESS SET-ASIDE.

PAGE OF PAGES

1 23

1. REQUEST NO.

75D301-26-Q-79194

2. DATE ISSUED

08/17/2026

3. REQUISITION/PURCHASE REQUEST NO.

000HCCRK-2026-98719

4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY

Centers for Disease Control and Prevention

Chamblee Campus Building 102, MS S102-4

4770 Buford Hwy

Atlanta GA 303413717

6. DELIVERY BY (Date)

5b. FOR INFORMATION CALL (No collect calls)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Sandra Adams (770) 488-5543 x

8. TO: 9. DESTINATION

a. NAME b. COMPANY a. NAME OF CONSIGNEE

c. STREET ADDRESS b. STREET ADDRESS

c. CITY

d. CITY e. STATE f. ZIP CODE d. STATE e. ZIP CODE

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services.

Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

This requirement for a Radio frequency telemetry system is being solicited as a sole source to IR

Telemetrics.

Questions regarding this RFP must be received by

Sandra Adams, ab41@cdc.gov by 10AM EST on

Monday, August 20, 2026.

Quote Submissions shall be submitted by: Monday, August 24, 2026, at 10AM EST to Sandra Adams at ab41@cdc.gov.

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS

c. 30 CALENDAR DAYS

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER 14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

a. NAME OF QUOTER

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

c. COUNTY AREA CODE

d. CITY e. STATE f. ZIP CODE c. TITLE (Type or print) NUMBER

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

Previous edition not usable Prescribed by GSA FAR (48 CFR) 53.215-1(a)

7. DELIVERY

FOB

DESTINATION

OTHER

(See Schedule)

ITEM SUPPLIES / SERVICES QTY / UNIT UNIT PRICE EXTENDED PRICE

0001 Transmitter

Single Channel Analog RF Transmitter

(Acceleration)

Custodial Account #: 00467

Firm Fixed Price

Period of Performance: From: Date of

Award to 90 Days after date of award.

1 Each

0002 Transmitter

Single Channel Analog RF Transmitter

(Strain)

0003 Converter

Inductive Power Converter with Pick Up

Coil

0004 Design

Design, machining and assembly of a clamp on Transmitter housing containing items 1 – 3

0005 Coil

Custom Inductive Exciter Coil with mounting hardware and integral receiving antennas.

0006 Power Supply

Model 1051 Inductive Power Supply

0007 Shipping

Shipping

SECTION B-STATEMENT OF WORK

Statement of Work / Performance Work Statement

Title: RF-based telemetry system

DATED: 08/03/2026

Period of performance of this contract is: Date of award to 90 days after award.

SECTION 1 – BACKGROUND

The NIOSH Pittsburgh Mining Research Division conducts research aimed at preventing roof falls in underground mines. This research focuses on using data from roof bolting machines to identify when the mine roof may be structurally unsound.

Collecting this data is difficult because key parts of the roof bolting machine rotate. Traditional wired systems are not practical in these areas.

A telemetry system is needed to collect sensor data during machine operation. This data will support research to better understand roof conditions and improve mine safety.

SECTION 2 – PURPOSE/OBJECTIVE

The purpose of this acquisition is to obtain a radio frequency telemetry system from IR

Telemetrics capable of collecting sensor data from a roof bolting machine during operation.

The objective is to collect data from the rotating drill steel of a roof bolting machine, where traditional wiring is not practical. The system must be capable of operating in high vibration environments, such as internal combustion engines, automotive transmissions, and rotating machinery, and must be demonstrated to maintain reliable data collection under these conditions.

The system must also include universal signal conditioning to support strain gauges, load cells, accelerometers, and other compatible sensors.

The data collected will support efforts to identify structurally unsound roof conditions and improve mine safety.

SECTION 3 – SCOPE OF WORK

The contractor shall provide a radio frequency telemetry system from IR Telemetrics capable of collecting sensor data from the rotating drill steel of a roof bolting machine. The system shall include all required components, accessories, and documentation needed for operation.

The system shall be capable of operating in high vibration environments and shall include signal conditioning to support strain gauges and accelerometers.

The contractor shall provide the following components:

1. One single channel analog radio frequency transmitter for acceleration

2. One single channel analog radio frequency transmitter for strain

3. One inductive power converter with pick up coil

4. One Model 1051 inductive power supply

5. One custom inductive exciter coil with mounting hardware and integral receiving antennas

The contractor shall provide design, machining, and assembly of a clamp-on transmitter housing containing the transmitters and power converter. The housing shall be designed to mount directly to the drill steel.

The system shall be delivered in fully functional condition.

SECTION 4 – TASKS TO BE PERFORMED

Task 1: Provide Telemetry System Components The contractor shall provide a radio frequency telemetry system from IR Telemetrics, including:

2. One single channel analog radio frequency transmitter for strain

3. One inductive power converter with pick up coil

4. One Model 1051 inductive power supply

5. One custom inductive exciter coil with mounting hardware and integral receiving

Task 2: Provide Custom Housing The contractor shall provide design, machining, and assembly of a clamp-on transmitter housing containing the transmitters and power converter. The housing shall be designed to mount directly to the drill steel.

Task 3: Deliver Equipment The contractor shall deliver all equipment in fully functional condition to the Government.

SECTION 5 – GOVERNMENT FURNISHED PROPERTY

N/A

SECTION 6 – PLACE OF PERFORMANCE AND CONTRACT SUPPORT HOURS

SUBSECTION: A

Work will be performed at the contractor’s facility. Equipment will be delivered to

NIOSH Pittsburgh Mining Research Division

626 Cochran Mill Road

Pittsburgh, Pennsylvania

15236-3611

SUBSECTION: B

The contractor shall perform delivery and installation activities during normal business hours, defined as Monday through Friday, 8:00 a.m. to 5:00 p.m., excluding Federal holidays, unless otherwise coordinated with the Contracting Officer’s Representative.

SUBSECTION C:

OBSERVANCE OF LEGAL HOLIDAYS AND ADMINISTRATIVE LEAVE

Holidays-Government personnel observe the following listed days as holidays:

Washington’s Birthday

Memorial Day

Juneteenth

Independence Day

Labor Day

Veteran’s Day

Thanksgiving

Christmas Day

New Year’s Day

Columbus Day

Martin Luther King Day

Any other day designated by Federal Statue

Any other day designated by Executive Order

Any other day designated by Presidential proclamation

SECTION 7 – TRAVEL

Not applicable.

SECTION 8 – DELIVERABLES/REPORTING SCHEDULE

The contractor shall deliver the following items within the agreed timeframe after contract award:

2. One single channel analog radio frequency transmitter for strain

3. One inductive power converter with pick up coil

4. One Model 1051 inductive power supply

5. One custom inductive exciter coil with mounting hardware and integral receiving

6. One clamp-on transmitter housing containing the transmitters and power converter

Deliverables:

Task Deliverable Quality/Format Due Date Deliver To

Task 1 Provide Telemetry

System Components

Provide a radio frequency telemetry system.

After receipt of award and within 90 days after award.

COR

Task 2 Provide Custom

Housing

Provide design, machining, and assembly of a clamp-on transmitter housing containing the transmitters and power converter. The housing shall be designed to mount directly to the drill steel.

After receipt of award and within 90 days after award.

COR

Task 3 Deliver Equipment Shall deliver all equipment in fully functional condition to the Government.

After receipt of award and within 90 days after award.

COR

Acceptance Criteria: Equipment shall be accepted upon verification that it meets manufacturer specifications and is fully operational.

SECTION 9 – REFERENCE MATERIALS

https://irtelemetrics.com/products/analog_telemetry_systems

SECTION 10 – MINIMUM VENDOR QUALIFICATIONS

The contractor shall be an authorized manufacturer or distributor capable of providing the required equipment.

SECTION 11 – ADDITIONAL REQUIREMENTS

OTHER CONSIDERATIONS AND ADDITIONAL INFORMATION FOR

OFFICE OF ACQUISITION SERVICES

Proposed Contract Type

EVALUATION FACTORS

No evaluation factors. This is a sole source contract and IR Telemetrics is the only authorized vendor support company for OpenText software in our geographical area.

Information Security and Privacy

N/A

Human Subjects Protections in Research

STARS Determination is not required

Paperwork Reduction Act (PRA)

Paperwork Reduction Act does not apply

Section 508 Compliance

Section 508 and Accessibility Requirements

Part A – Provision

352.239-78 Information and Communication Technology Accessibility Notice. (Deviation)

As prescribed in 339.203-70(a), insert the following provision:

INFORMATION AND COMMUNICATION TECHNOLOGY ACCESSIBILITY NOTICE

(FEB 2024) (DEVIATION)

Reference HHSAR 352.239-73[8] Electronic Information and [Communication] Technology

Accessibility Notice.

[(Deviation)]

[(a) Any offeror responding to this solicitation must comply with established HHS Information and Communication Technology (ICT) accessibility standards. Information about Section 508 is available at https://www.hhs.gov/web/section-508/index.html.

(b) The Section 508 accessibility standards applicable to this solicitation are stated in the clause at 352.239-79 Information and Communication Technology Accessibility. In order to facilitate the Government’s determination whether proposed ICT supplies, products, platforms, information, and documentation meet applicable Section 508 accessibility standards, offerors must submit an appropriate HHS Section 508 Accessibility Conformance Checklist (see https://www.hhs.gov/web/section-508/accessibility-checklists/index.html) or an Accessibility

Conformance Report (ACR) (based on the Voluntary Product Accessibility Template (VPAT) see https://www.itic.org/policy/accessibility/vpat), in accordance with the completion instructions. The purpose of the checklists and conformance reports are to assist HHS acquisition and program officials in determining whether proposed ICT supplies, products, platforms, information, and documentation conform to applicable Section 508 accessibility standards.

Checklists and ACRs evaluate—in detail—whether the ICT conforms to specific Section 508 accessibility standards and identifies remediation efforts needed to address conformance issues.

(c) If an offeror claims its supplies or services meet applicable Section 508 accessibility standards, and it is later determined by the Government, i.e., after award of a contract or order, that supplies, products, platforms, information, documentation, or services support delivered do not conform to the described accessibility standards, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its expense.

(d) In order to facilitate the Government's determination whether proposed ICT supplies meet applicable Section 508 accessibility standards, offerors must submit an Accessibility

Conformance Report, in accordance with its completion instructions and tailored to the requirements in the solicitation. The purpose of the Report is to assist HHS acquisition and program officials in determining whether proposed ICT supplies conform to applicable Section

508 accessibility standards. The template allows offerors or developers to self-evaluate their supplies and document, in detail, whether they conform to a specific Section 508 accessibility standard, and any underway remediation efforts addressing conformance issues. Instructions for preparing the Template are available at https://www.section508.gov/.

(e) Additionally, offerors must provide enough information to assist the Government in determining that the ICT services conform to Section 508 accessibility standards, including any underway remediation efforts addressing conformance issues.

(f) Respondents to this solicitation must identify any inability to conform to Section 508 requirements. If an offeror claims its supplies or services meet applicable Section 508 accessibility standards, and it is later determined by the Government, i.e., after award of a contract or order, that supplies or services delivered do not conform to the described accessibility standards, remediation of the supplies or services to the level of conformance specified in the contract will be the responsibility of the Contractor at its expense.

(g) Items delivered as electronic content must be accessible to HHS acceptance criteria.

Checklist for various formats are available at http://508.hhs.gov/. Materials, other than items incidental to contract management, that are final items for delivery should be accompanied by the appropriate checklist, except upon approval of the Contracting Officer or Contracting

Officer’s Representative.

(End of provision)]

Part B - Clause

352.239-79 Information and Communication Technology Accessibility. (Deviation)

As prescribed in 339.203-70(b), insert the following clause:

INFORMATION AND COMMUNICATION TECHNOLOGY ACCESSIBILITY (FEB 2024)

(DEVIATION)

(a) Pursuant to Section 508 of the Rehabilitation Act of 1973 (29 U.S.C. 794d), as amended by the Workforce Investment Act of 1998, all information and communication technology (ICT) supplies, products, platforms, information, documentation, and services support developed, acquired, maintained or delivered under this contract or order must comply with the Revised 508

Standards, which are located at 36 C.F.R. 1194.1 and Appendices A, B, and C, and are available at https://www.access-board.gov/ict/. Information about Section 508 is available at https://www.hhs.gov/web/section-508/index.html.

(b) Additional Section 508 accessibility standards applicable to this contract or order may be identified in the specification, statement of work, or performance work statement. If it is determined by the Government that ICT supplies, products, platforms, information, documentation, and services support provided by the Contractor do not conform to the described accessibility standards in the contract, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its own expense.

(c) In the event of a modification(s) to this contract or order, which adds new ICT supplies or services or revises the type of, or specifications for, supplies, products, platforms, information, documentation, or services support, the Contracting Officer shall require that the Contractor submit a completed HHS Section 508 Accessibility Conformance Checklist (see https://www.hhs.gov/web/section-508/accessibility-checklists/index.html) or an Accessibility

Conformance Report (ACR) (based on the Voluntary Product Accessibility Template (VPAT) see https://www.itic.org/policy/accessibility/vpat), and any other additional information necessary to assist the Government in determining that the ICT supplies or services conform to

Section 508 accessibility standards. If it is determined by the Government that ICT supplies, products, platforms, information, documentation, and services support provided by the

Contractor do not conform to the described accessibility standards in the contract, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its own expense.

(d) If this is an Indefinite-Delivery type contract, a Blanket Purchase Agreement or a Basic

Ordering Agreement, the task/delivery order requests that include ICT supplies, products, platforms, information, documentation, or services support will define the specifications and accessibility standards for the order. In those cases, the Contractor shall be required to provide a completed HHS Section 508 Accessibility Conformance Checklist (see https://www.hhs.gov/web/section-508/accessibility-checklists/index.html) or an ACR (based on the VPAT see https://www.itic.org/policy/accessibility/vpat), and any other additional information necessary to assist the Government in determining that the ICT supplies, products, platforms, information, documentation, or services support conform to Section 508 accessibility standards. If it is determined by the Government that ICT supplies and services provided by the

Contractor do not conform to the described accessibility standards in the provided documentation, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its own expense.

(e) The contractor shall identify to the Contracting Officer any perceived exception or exemption to Section 508 requirements.

(End of clause)

SECTION C CLAUSES

FAR

SOURCE

TITLE AND DATE

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017)

52.204-7 System for Award Management-Registration (Deviation)(Aug 2025)

52.204-13 System for Award Management Maintenance (Oct 2018)

52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013)

52.232-40 Providing Accelerated Payments to Small Business Contractors (Mar 2023)

352.222-70 Contractor Cooperation in Equal Employment Opportunity Investigations (Dec 2015)

352.223-70 Safety and Health (Dec 2015)

352.239-71 Security Requirements for Information Technology Resources (Feb 2024)

352.239-72 Information Technology Security Plan and Accreditation (Feb 2024)

352.239-74 Electronic and Information Technology Accessibility (Dec 2015)

352.204-73 Contractor Personnel Security and Agency Access

52.217-6 Option for increase quantities (Mar 1989)

52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products.(Feb 2021)

FAR 52.252-1 - Solicitation Provisions Incorporated by Reference.

As prescribed in 52.107(a), insert the following provision:

SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far

(End of provision)

52.212-4 Terms and Conditions—Commercial Products and Commercial Services.

As prescribed in 12.205(b)(3), insert the following clause:

Terms and Conditions—Commercial Products and Commercial Services (Deviation Date)

(a) Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.

(b) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(c) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31

U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(e) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The

Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the

Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall—

(1) Notify the Contracting Officer in writing as soon as possible;

(2) Remedy the delay as quickly as possible; and

(3) Notify the Contracting Officer when the occurrence is over.

(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31

U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices. An invoice must include the information required by 5 CFR part 1315.9(b).

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt

Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(4) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable;

(D) Contractor point of contact; and

(ii) Provide a copy of the remittance and supporting documentation to the Contracting

Officer.

(5) Interest.(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the

Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by

FAR part 33 if–

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the

Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a termination for cause.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the

Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt;

or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the

Government upon—

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the

Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the

Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain

Federal contracts; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C.

chapter 87, Kickbacks; 49 U.S.C. 40118, Government-financed air transportation; and 41 U.S.C.

chapter 21 relating to procurement integrity.

(r) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services;

(2) The Disputes, Payments, Invoice, Compliance with Laws Unique to Government

Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) Other contract clauses incorporated in the solicitation or contract;

(4) Addenda to this solicitation or contract;

(5) Solicitation provisions incorporated in the solicitation;

(6) Other paragraphs of this clause;

(7) Other documents, exhibits, and attachments; and

(8) The specification.

(s) Unauthorized obligations.

(1) Except as stated in paragraph (s)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency

Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government-authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (s)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(t) Comptroller General examination of record. This paragraph applies if this contract was awarded using other than sealed bid procedures and is in excess of the simplified acquisition threshold on the date of award of this contract.

(1) The Comptroller General of the United States, or an authorized representative of the

Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices, at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR part 4, longer period required by statute, or periods specified in other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This clause does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(u) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

HHSAR 352.232-71

As prescribed in HHSAR 332.7003, use the following clause:

Electronic Submission of Payment Requests

(a) Definitions. As used in this clause -

Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), “Content of Invoices” and the applicable Payment clause included in this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site.

(c) The Contractor may submit payment requests using other than IPP only when the Contracting

Officer authorizes alternate procedures in writing in accordance with HHS procedures.

(d) If alternate payment procedures are authorized, the Contractor shall include a copy of the

Contracting Officer's written authorization with each payment request.

(End of Clause)

SECTION G-CONTRACT ADMINISTRATION DATA

CDCG.02 Contracting Officer’s Representative (COR) (Jul 2017)

Performance of the work hereunder shall be subject to the technical directions of the designated COR for this contract. As used herein, technical directions are directions to the

Contractor which fill in details, suggests possible lines of inquiry, or otherwise completes the general scope of work set forth herein. These technical directions must be within the general scope of work and may not alter the scope of work or cause changes of such a nature as to justify an adjustment in the stated contract price/cost, or any stated limitation thereof.

In the event that the Contractor believes full implementation of any of these directions may exceed the scope of the contract, he or she shall notify the originator of the technical direction and the Contracting Officer, immediately or as soon as possible, in a letter or email separate of any required report(s). No technical direction, nor its fulfillment, shall alter or abrogate the rights and obligations fixed in this contract.

The Government COR is not authorized to change any of the terms and conditions of this contract. Contract changes shall be made only by the Contracting Officer through properly written modification(s) to the contract.

The Government will provide the Contractor with a copy of the COR delegation memorandum upon request.

CDCG.03 Contracting Officer (Jul 1999)

(a) The Contracting Officer is the only individual who can legally commit the Government to the expenditure of public funds. No person other than the Contracting Officer can make any changes to the terms, conditions, general provisions, or other stipulations of this contract.

(b) No information, other than that contained in an authorized modification to this contract, duly issued by the Contracting Officer, received from any person employed by the United

States Government, or otherwise, shall be considered grounds for deviation from any stipulation of this contract.

CDCG.04 Contract Communications/Correspondence (Jul 1999)

The Contractor shall identify all correspondence, reports, and other data pertinent to this contract or order by imprinting thereon the contract (and order number if applicable) from Page 1 of the contract.

CDCG.07 Payment by Electronic Funds Transfer (Feb 2018)

(a) The Government shall use electronic funds transfer to the maximum extent possible when making payments under this contract. FAR 52.232-33, Payment by Electronic Funds Transfer –

System for Award Management, requires the contractor to designate in writing a financial institution for receipt of electronic funds transfer payments.

(b) In the case that EFT information is not within the System of Award Management, FAR

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management, requires mandatory submission of Contractor’s EFT information directly to the office designated in this contract to receive that information (hereafter: “designated office”); see below. The contractor shall submit the EFT information within the form titled “ACH Vendor/Miscellaneous

Payment Enrollment Form” to the address indicated below. Note: The form is either attached to this contract (see Section J, List of Attachments) or may be obtained from the CDC Office of

Financial Resources at 678-475-4500 or cpbapinv@cdc.gov.

(c) In cases where the contractor has previously provided such information, i.e., pursuant to a prior contract/order, and been enrolled in the program, the form is not required unless the designated financial institution has changed.

(d) The completed form shall be mailed or sent via facsimile after award, but no later than 15 calendar days before an invoice is submitted, to the following address:

The Centers for Disease Control and Prevention Office of Financial Resources (OFR)

P.O. Box 15580 Atlanta, GA 30333

Section H – Special Contract Requirements

CDCH.10 Artificial Intelligence Compliance and Risk Management Plan (May 2026)

The use of Artificial Intelligence (AI), including GenAI, is prohibited without an approved AI

Compliance and Risk Management Plan. The contractor is responsible for updating the AI

Compliance and Risk Management Plan throughout the life of the contract as changes occur. If a change to AI use, AI functionality, AI model, or deployment configuration is anticipated, the contractor must notify the contracting officer and Contracting Officer’s Representative (COR) immediately and provide a revised plan. The government will issue approval or disapproval before AI can be incorporated. The offeror must identify whether the planned or potential AI use may involve a high-impact AI use case (as defined in defined in Appendix A of OMB-M-25-21) and must provide sufficient descriptive information for the Government to complete any required

AI impact or high-impact assessment.

The AI Compliance and Risk Management Plan must:

1. Identify the specific tasks or functions where AI will be used.

2. Explain how logs, audits, or other forms of AI generated data will be stored, used, retained, or deleted.

3. State whether the AI technologies are open-source, proprietary, or any other type.

4. Include applicable model cards or system documentation describing the AI technologies used.

5. Describe how bias in AI models and outputs will be identified, monitored, and mitigated, including the origin, quality, and weighting of data.

6. Explain the AI safeguards in place, including compliance and risk management practices, protections against unauthorized data access, and steps taken to manage bias and reduce risk in alignment with applicable AI policies and directives.

7. Describe internal policies governing AI use, including transparency, accountability, data integrity, accuracy, protection of sensitive or proprietary information, foreseeable risks, and potential social impacts.

8. Explain how the contractor will assess and prevent unfair or disparate impacts, address privacy, civil rights, and civil liberties concerns, and prevent misuse, unauthorized use, or corruption of AI systems.

9. Confirm that the AI solution will not make or support decisions based on unlawful discrimination in violation of federal civil rights laws, including Title VII of the Civil

Rights Act, the Americans with Disabilities Act (ADA), and the Age Discrimination in

Employment Act (ADEA).

10. Describe how applicable technological or voluntary consensus standards will be incorporated to reduce acquisition and operational risk

11. The plan must describe how Government data, outputs, prompts, logs, and outputs be accessed, used, protected, retained, deleted, and transferred, and identify any proposed limitations on Government rights, access, or reuse.

12. The AI Compliance and Risk Management Plan will be reviewed by the Government and an approval or disapproval issued.

H.6 CDCH.12 Observance of Legal Holidays and Unscheduled Facility Closures (on-site

Performance) (Jan 2026)

(a) Holidays – The Government observes the holidays as listed by the Office of Personnel

Management, as well as:

Any other day designated by Federal Statute

Any other day designated by Executive Order

Any other day designated by Presidential proclamation

Washington's Birthday

Memorial Day

Juneteenth

Independence Day

Labor Day

Veterans' Day Thanksgiving Day

Christmas Day

New Year's Day

Columbus Day

Martin Luther King Day

For purposes of contract performance, the Contractor shall observe the above holidays on the date observed by the Government. Observance of such days shall not be cause for an additional period of performance or entitlement to compensation except as otherwise set forth in the contract. No form of holiday or other premium compensation will be reimbursed; however authorized in advance and in writing by the Contracting Officer.

(b) Unscheduled Facility Closures

In the event Government facilities are closed due to inclement weather, potentially hazardous or unsafe conditions, or other special circumstances, contractor personnel assigned to work within those facilities are automatically dismissed. Notwithstanding the terms herein, the contractor shall comply with any specific contract terms that require a level of ongoing support for critical operations during times of facility closure. The contractor may also continue to provide support under a scheduled telework arrangement in accordance with the terms of the contract if the contract expressly authorizes telework in writing.

(c) Cost Impact

Accounting for costs associated with an unscheduled facility closure is unique to each contract, but the contractor shall mitigate costs to the degree it is reasonably possible.

CDCH.16 Non-Disclosure Agreement for Contractor and Contractor Employees (Jun 2020)

(a) The contractor and contractor employees shall prepare and submit Non-Disclosure Agreements (NDA) to the Contracting Officer prior to access of government information or the commencement of work at

CDC.

(b) The NDAs, at Exhibit I and II, are required in service contracts where contractor’s employees will have access to non-public and procurement-sensitive information while performing functions in support of the Government. The NDA also requires contractor’s employees properly identify themselves as employees of a contractor when communicating or interacting with CDC employees, employees of other governmental entities, and members of the public (when communication or interaction relates to the contractor’s work with the CDC). The Federal Acquisition Regulation (FAR) 37.114 (c), states “All contractor personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public or Congress that they are

Government officials, unless, in the judgment of the agency, no harm can come from failing to identify themselves. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.”

(c) The contractor shall inform contractor employees of the identification requirements by which they must abide and monitor employee compliance with the identification requirements.

(d) During the contract performance period, the contractor is responsible to ensure that all additional or replacement contractors’ employees sign an NDA and it is submitted to the Contracting Officer prior to commencement of their work with the CDC.

(e) Contractor employees in designated positions or functions that have not signed the appropriate NDA shall not have access to any non-public, procurement sensitive information or participate in government meetings where sensitive information may be discussed.

(f) The Contractor shall prepare and maintain a current list of employees working under NDAs and submit to the Contracting Officer upon request during the contract period of performance. The list shouldat a minimum include: contract number, employee’s name, position, date of hire and NDA requirement.

EXHIBIT I

Centers for Disease Control and Prevention (CDC)

Contractor Non-Disclosure Agreement

I. Non-public Information

[Name of contractor] understands that in order to fulfill the responsibilities pursuant to [contract name and number] between the Centers for Disease Control and Prevention and [Name of CDC contractor] dated [date], employees of [contractor] will have access to non-public information, including confidential and privileged information contained in government-owned information technology systems.

For purposes of this agreement, confidential information means government information that is not or will not be generally available to the public. Privileged information means information which cannot be disclosed without the prior written consent of the CDC.

In order to properly safeguard non-public information, [contractor] agrees to ensure that prior to being granted access to government information or the commencement of work for the CDC, whichever is applicable, all contractor employees will sign a Non-Disclosure Agreement (NDA) provided by the CDC prior to beginning work for the CDC. Contractor agrees to submit to the Contracting Officer the original signed copies of NDAs signed by the contractor’s employees in accordance with the instructions provided by the Contracting Officer. Failure to provide signed NDAs in accordance with this agreement and instructions provided by the Contracting Officer could delay or prevent the employee from commencing or continuing work at the CDC until such agreement is signed and returned to the Contracting Officer.

Contractor further agrees that it will not cause or encourage any employee to disclose, publish, divulge, release, or make known in any manner or to any extent, to any individual other than an authorized

Government employee any non-public information that the employee may obtain in connection with the performance of the employee’s responsibilities to the CDC.

II. Procurement-Sensitive Information

Contractor further agrees that it will not cause or encourage any employee to disclose, publish, divulge, release, or make known in any manner or to any extent, to any individual, other than an authorized

Government employee, any procurement-sensitive information gained while in connection with fulfilling the employee’s responsibilities at the CDC. For purposes of this agreement, procurement-sensitive information includes, but is not limited to, all information in Statements of Work (SOW), Procurement

Requests (PR), and Requests for Proposal (RFP); Responses to RFPs, including proposals, questions from potential offerors; non-public information regarding procurements; all documents, conversations, discussions, data, correspondence, electronic mail (e-mail), presentations, or any other written or verbal communications relating to, concerning, or affecting proposed or pending solicitations or awards;

procurement data; contract information plans; strategies; source selection information and documentation;

offerors’ identities; technical and cost data; the identity of government personnel involved in the solicitation;…