A06_-_Specialized_Fish_Pump_-_Specifications.pdf
PDF 149 KB Posted
- Solicitation number
- 140FS224Q0137
About this file
This document appears to be a set of technical specifications for a Specialized Fish Pump and Harvester System required for the Saratoga National Fish Hatchery located in Wyoming.
The specifications detail the requirements for an auto-priming, cart-mounted, electric fish pumping system capable of safely transferring up to 1.32 lb fish with 8 feet of suction head and 30 feet of total head. The pump system must have a 5 HP main drive and 1.5 HP auto-priming pump, with wireless remote controls. The harvester trailer must have an all-steel frame construction with stainless steel components, a single 3500 lb axle, telescoping tubes, dual hydraulic power units, and an integrated 11 kW generator. The system must include various hoses, elbows, and cones to enable remote fish transfer and dewatering capabilities. The solicitation number is 140FS224Q0137, and it is being issued by the Department of the Interior Fish and Wildlife Service for the Saratoga National Fish Hatchery in Wyoming.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B08_-_Past_Experience_and_References_Form.pdf | ||
| Sol_140FS224Q0137.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Pump Specifications
• Auto-Priming, Cart Mounted, Electric Fish Pumping System 240V, 1PH., 60 HZ.
• 8 �. electrical cord
• large pneuma�c rubber front swivel casters, and pneuma�c rear casters.
• All aluminum pump and cart assembly with stainless steel electrical enclosure
• 5 H.P. main drive, 1.5 H.P. auto priming system pump, dual drive pulleys and belts on fish pump drive
• True 6” pump housing and impeller vane
• Side tangential housing discharge
• Fully cast aluminum powder coated housing with transitioning fish entry
• Push button priming system.
• Wireless remote system with pump operation lights and pump speed display.
• Fully sealed TEFC electric motors with custom sealed housing, liquid slinger seals, drip guard and salt spray rated epoxy coating.
• Double cantilevered, quad bearing drive assembly for long life.
• Capable of safely transferring 1.32 lb fish when equipped airtight fittings.
• Capable of 8 feet of suction head with a cumulative head of 30 feet.
Harvester Specifications
• All steel frame construction with Stainless Steel expanded flooring, telescoping tubes, and tongue assembly.
• All components powder Coated for corrosion protection and long life.
• Single 3500 # axel with 15” radial tires
• Dual operation and single operation hydraulic power units for top platform adjustment.
• 3-Ram platform configuration for stability and symmetric movement.
• Integrated ladder for top platform accessibility.
• Designated storage area for fish pump.
• Integrated winch system for placing the pump in storage area of trailer.
• Integrated strapping points to secure pump during transport
• Pump appropriate dewatering system with ability to dewater up to 100%
• Ability to adjust de-waterer slope for customer specific dewatering exposure time.
• Swivel, telescoping fish discharge tube for multiple compartments loading from a single location.
• 3- 6" x 15' Clear spiral hose with Alum. Ring lock fi�ngs, includes male, female, clamp, gasket and 2 S.S. hose clamps.
• 1 -6" x 20' Aluminum Pipe with Alum. Ring lock fi�ngs, includes male, female, clamp, and gasket.
• 1 - 6" x 25' Intake hose with Air�ght fi�ngs, includes: male, female, S.S. v-clamp, O-ring and 2 S.S. hose clamps
• 1 - 6" x 15' Water discharge hose with Alum. Ring lock fi�ngs, includes male, female, clamp, gasket and 2 S.S. hose clamps.
• 1 - 6" 45-degree Elbow
• 1 - 6" Suc�on Cone
• Integrated 11kw generator for remote pump operation.
File details come from the government source that posted it. Updated .