A06_009800_5_gal_drum_PIC_SPEC.pdf
PDF 89 KB Posted
- Attached to
- UN APPROVED 5 GALLON STEEL DRUM
- Solicitation number
- 140L0224Q0026
About this file
This document is a product specification for a UN approved 5-gallon steel drum used for the surface and air shipment of flammable liquids, class 3. The drums must meet a minimum UN/DOT rating of 1A1/X1.6/280 or better, and have a tight head design with a 3/4-inch bung and a 2-inch bung. The drums must have a rust-resistant interior coating and be covered in plastic sheeting or stretch wrap during transit. This specification is related to a federal contract opportunity solicitation issued by the Department of the Interior's Bureau of Land Management, solicitation number 140L0224Q0026, for the procurement of UN approved 5-gallon steel drums.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140L0224Q0026.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UN approved 5-gallon Steel Drum
NFES # 009800
5-gallon UN approved certified steel drum used for surface and air shipments of Flammable Liquids, Class3.
The 5-gallon drums are to meet the following specs:
The drums must be UN approved/certified for surface and air shipment of Flammable Liquids, Class 3.
With a minimum UN/DOT rating of: 1A1/X1.6/280 or equal or better.
Drums must be tight head (TH) design, with a ¾” inch bung and a 2” inch bung with polyethylene gaskets. The outside height of the pail is 13 3/8 inches. The interior dimensions are L: 11 1/4 inches inside diameter, H: 12 9/16 inches inside height. Handle: steel rod, D-style, attached to drumhead w/ brazed plate between the ¾” bung and 2” bung. MUST BE A NON-FLEX SPOUT DRUM.
The interior of the drums must have a rust resistant coating.
The drum must be covered by plastic sheeting or stretch wrap to protect them from moisture or dust while in transit.
mlstewart Reviewed
¾” CLOSURE SIZE
2” CLOSURE SIZE
This packing group level tested marking must be no less than an “X”.
1A1/X1.6/280
File details come from the government source that posted it. Updated .