A06_0040591275_Specifications_FOPU_Utility_Boat_.pdf

Specifications

Maintain Offshore Resources at Fort Pulaski – 26 – 30’ Watercraft

1. Background. Fort Pulaski National Monument (FOPU) is located in Savannah, GA. There is an annual visitation of approximately 400,000 people from around the world that come to view the fort, lighthouse, historic bunkers, cisterns, and trails.

2. Required Services. The contractor shall provide a 26 – 30’ watercraft to be used to maintain offshore resources at Fort Pulaski National Monument, and shall fit into the below listed specifications.

3. Contractor Responsibilities:

• Watercraft is to have a hull length of 26-30’

• Watercraft is to have a beam of 8’

• Watercraft is to have a flat-bottom hull such as a Packcat Catamaran Hull

• Hull material is to be aluminum.

• Watercraft is to come equipped with a bow door powered by a 12v winch

• Watercraft is to have a center console with aluminum top with storage.

• Watercraft is to be open air top

• Propulsion requirement will depend on size of watercraft. For 26 - 28’ watercraft, propulsion is to be 2x150 hp. For 30’ propulsion is to be 2x250 hp.

• Watercraft is to come equipped with automatic anchoring and two power poles

• Watercraft is to be furnished with electronic equipment including GPS with built-in depth finder, trim tabs, Vhf radio, horn, and lights

• Draft of the watercraft must be 8” to 2’

• Working deck width: 6’ in front of center console

• Working deck length 10’ In front center console

• Watercraft is to come with a trailer that is suited to fit the vessel.

• Watercraft is to have all safety features per OSHA regulations