9925buy.pdf

CHAPLAIN'S KIT – 9925-01-305-3411

SPECIAL NOTE: THE CARRYING CASE (9925-01-452-3887) AND STOLE (9925-01-455-4590) ARE

TO USE THE OCP (OPERATION CAMOUFLAGE PATTERN) IN LIEU OF THE ASU PATTERN.

ADDITIONAL INFORMATION FOR FR/PD 99-05:

CHAPLAIN'S KIT; CONTENTS: BOTTLE, WIDE MOUTH, PLASTIC (2 OZ.) (1 EA); BOTTLE, WIDE

MOUTH, PLASTIC (4 OZ.) (1 EA); BOTTLE, PLASTIC, PRESS LOCK CAP (1 EA); CARD,

ABSOLUTION, ANOINTING (1 EA); CARD, PRAYER (1 EA); CHALICE (CUP, BASE, INTINCTION CUP

AND PATEN) (1 EA); CLOTH, CORPORAL(1 EA), CLOTH PURIFICATION (1 EA); CROSS AND

CRUCIFIX (1 EA), OIL STOCK (1 EA); PYX (1 EA); RECONCILIATION STOLE (1 EA); STOLE (1

EA); CARRYING CASE (2 EA); CASE, ACCESSORY (1 EA); READING LIGHT (1 EA); CLOTH,

FINGER TOWEL (1 EA); PRIEST BREAD CONTAINER (1 EA); PARTS LIST CARD (1 EA)

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

CHAPLAIN'S KIT – 9925-01-326-2856

SPECIAL NOTE: THE CARRYING CASE (9925-01-452-3887) AND PRAYER SHAWLS (TALLIT)(9925- 01-673-0359) AND (9925-01-673-0367)ARE TO USE THE OCP (OPERATION CAMOUFLAGE PATTERN)

IN LIEU OF THE ASU PATTERN.

ADDITIONAL INFORMATION FOR FR/PD 99-06:

INTERIM CHANGES TO FR/PD 99-06:

PAGE 1, PARA. 3 DESIGN AND ARRANGEMENT,

LINE 5, DELETE "TZITZIT".

PAGE 1, PARA. 3, LINE 6, AFTER "(TORAH POINTER,

MINIATURE);" INSERT "READING LIGHT;".

PAGE 3, PARA. 4(G) TALLIT, NYLON, WOODLAND

CAMOUFLAGE, DELETE: "A PIECE OF VELCRO (LOOP),

MEASURING 3/4" X 1/2", IS SEWN IN EACH OF THE

FOUR CORNERS AT THE BOTTOM OF THE TALLIT."

PAGE 4, PARA. 4(J) TZITZIT, DELETE IN ITS

ENTIRETY. ALSO, RE-LETTER ITEM "K" AS ITEM

"J" AND RE-LETTER ITEM "I" AS ITEM "K".

PAGE 4, PARA. 5 ASSEMBLING THE KIT, ITEM

"6)", DELETE "(INCLUDING TZITZIT)".

PAGE 9, FIGURE 2. PARTS LIST/IDENTIFICATION

LABEL, UNDER "COMPONENT" COLUMN, DELETE

"TZITZIT".

LIST OF ITEMS IS AS FOLLOWS:

BOTTLE, WIDE MOUTH, PLASTIC (2 OZ) (1 EA); BOTTLE, WIDE MOUTH, PLASTIC (4 OZ) (1 EA);

TORAH, SCROLL (MINIATURE) (1 EA); YAD (TORAH POINTER) (1 EA); KIDDUSH CUP ASSEMBLY

(1 EA); TALLIT, NYLON, WOODLAND (1 EA); TORAH BASE (WITH LEGS) (1 EA); ETERNAL LIGHT

ASSEMBLY (1 EA); CHEMICAL LIGHTS (5 EA); CARRYING CASE (2 EA); READING LIGHT (1

EA); PARTS LIST CARD (1 EA)

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

KIT, ORTHODOX, MINISTRY EXTENDER – 9925-01-452-1129

SPECIAL NOTE: THE CARRYING CASE (9925-01-452-3887) IS TO USE THE OCP (OPERATION

CAMOUFLAGE PATTERN) IN LIEU OF THE ASU PATTERN.

ADDITIONAL INFORMATION FOR FR/PD 99-08:

KIT, ORTHODOX, MINISTRY EXTENDER, SHALL CONTAIN THE FOLLOWING ITEMS: CORPORALS (3 EA);

SMALL NECK CROSSES, TRIPLE BAR, EASTERN ORTHODOX CHRISTIAN STYLE (15 EA); SMALL ICON OF CHRIST (15 EA); CRUCIFIX, TRIPLE BAR, EASTERN ORTHODOX CHRISTIAN STYLE (1 EA);

DIVINE LITURGY (1 EA); HOLY WATER SPRINKLER (1 EA); BOTTLES, PLASTIC, TWO OUNCE (2 EA); CARRYING CASE (1 EA); ICON OF CHRIST LAMINATED ON WALNUT BOARD (1 EA); READING

LIGHT ( 1 EA); BIBLE, KING JAMES VERSION (1 EA); PARTS LIST CARD (1 EA)

KIT, ORTHODOX, CHAPLAINS – 9925-01-455-4569

SPECIAL NOTE: THE CARRYING CASE (9925-01-452-3887) AND STOLE (9925-01-455-4590) ARE

TO USE THE OCP (OPERATION CAMOUFLAGE PATTERN) IN LIEU OF THE ASU PATTERN.

ADDITIONAL INFORMATION FOR FR/PD 99-09:

KIT, ORTHODOX, CHAPLAINS; CONSISTS OF THE FOLLOWING COMPONENTS:

ACCESSORY CASE (1 EA);BOTTLE, WIDE MOUTH, PLASTIC (2 OZ.)(1 EA); BOTTLE, WIDE MOUTH, PLASTIC (4 OZ.)(1 EA); BOTTLE, PLASTIC, PRESS LOCK CAP(1 EA); CARRIER CASE (2 EA);

CHALICE ASSEMBLY(1 EA); CLOTH, CORPORAL(1 EA); CLOTH, PURIFICATOR(1 EA); CLOTH, FINGER TOWEL(1 EA); CONTAINER, PRIEST BREAD(1 EA); CRUCIFIX, TRIPLE BAR (WITH BASE)(1 EA);

HOLY WATER SPRINKLER(1 EA); ICON OF CHRIST, ALTAR(1 EA); OIL STOCK(1 EA); PYX,

STAINLESS STEEL(1 EA); STOLE, RECONCILIATION(1 EA); READING LIGHT(1 EA); STOLE, NYLON, WOODLAND(1 EA); PARTS LIST(1 EA)

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

BOTTLE, PLASTIC, PRESS LOCK CAP – 9925-01-455-4569

BOTTLE, PLASTIC, PRESS LOCK CAP; THE BOTTLE/TUBE WITH PRESS LOCK CAP SHALL BE OF

FLEXIBLE, STURDY, FOOD GRADE PLASTIC AND CAPABLE OF HOLDING BETWEEN 50 AND 70

COMMUNION HOST/WAFERS. THE BOTTLE SHALL HAVE A DIAMETER OF 1-1/4 INCHES.

BOTTLE,PLASTIC,(2 OZ) – 9925-01-450-8636

BOTTLE, PLASTIC, 2 OUNCE; SHALL BE COMMERCIAL ITEM MADE OF FLEXIBLE, STURDY, FOOD GRADE PLASTIC; SHALL BE SUITABLE TO HOLD WATER AND OIL; SUGGESTED MANUFACTURER IS

NALGENE OR EQUAL

BOTTLE, WIDE MOUTH, PLASTIC (4 OZ.) – 9925-01-455-4573

BOTTLE, WIDE MOUTH, PLASTIC (4 OUNCE); SHALL HAVE A SCREW CAP; SHALL BE COMMERCIAL

ITEM MADE OF FLEXIBLE, STURDY, FOOD GRADE PLASTIC ; SHALL HAVE A DIAMETER NOT TO

EXCEED 2 INCHES; SUGGESTED SOURCE OF SUPPLY IS NALGENE OR EQUAL

CARD, ABSOLUTION AND ANOINTING – 9925-01-455-4755

CARD, ABSOLUTION AND ANOINTING, 3" X 3" (+/-1/8"), 110 LB. INDEX (CARDSTOCK), OFF- WHITE COLOR, LAMINATED ON BOTH SIDES WITH 3-MIL MINIMUM) PLASTIC, LAMINATED BORDER EDGES 1/8" MINIMUM, 8 POINT BOLD ARIAL/HELVETICA FONT,CARD IS ALSO WRITTEN IN SPANISH, USED BY U.S. CHAPLAINCY

CARD, PRAYER – 9925-01-455-3898

CARD, PRAYER, SHALL BE 5-1/4" X 4-1/4"(+/-1/8"), 1/8" MINIMUM BORDER AND ROUNDED

CORNERS, MADE OF 110 LB. INDEX (CARD STOCK),OFF-WHITE COLOR, LAMINATED ON BOTH SIDES

WITH 3-MIL (MINIMUM) PLASTIC, LAMINATED BORDER EDGES 1/8" MINIMUM, 10-POINT BOLD

ARIAL/HELVETICA FONT, USED BY U.S. CHAPLAINCY

CARDS, PRAYER SERVICE – 9925-01-451-2317

CARDS, PRAYER SERVICE; CATHOLIC RITE OF DISTRIBUTING HOLY COMMUNION OUTSIDE OF MASS;

EACH CARD SHALL BE LAMINATED WITH 3 MIL CLEAR PLASTIC ON EACH SIDE USING A CARD STOCK AND SCORED IN THE CENTER FOR EASY FOLDING. SIZE SHALL BE 6-1/2 INCH HIGH BY 11-1/2

INCH WIDE. LAMINATION SHALL OVER HANG THE BORDER BY 1/8 INCH

CHALICE ASSEMBLY – 9925-01-455-3914

CHALICE ASSEMBLY(CUP, BASE, INTINCTION AND PATEN) SHALL BE OF CORROSION RESISTANT STEEL THAT ALLOWS FOR FIELD USE WITHOUT REQUIRING SPECIAL PROTECTION OR CLEANING; MILL FINISHED HALICE EXTERIOR TO PREVENT REFLECTION; INTERIOR OF CHALICE CUP, INTINCTION CUP AND PATEN POLISHED FINISH; PATEN TO FIT SECURELY ON TOP OF THE OPENING OF CHALICE CUP TO PREVENT FOREIGN MATTER FROM ENTERING IN WINDY CONDITIONS; CHALICE AND PATEN HAVE NO MARKINGS; CHALICE CUP: 2.2125" DEEP, INTERIOR IS POLISHED AND OUTER SURFACE IS BEAD BLASTED TO FORM A NONGLARE SURFACE; INTINCTION CUP: FORMED PART 1.240" DEEP;

AFTER CLEANING CUP IS BRITE DIPPED FOR FINISH; PATEN: FORMED PART WITH LIP .300" DEEP BY 3.485" INNER DIMENSION,AFTER CLEANING PART, ITS FINISH IS CREATED BY BRITE DIP.

CORPORAL – 9925-01-451-1890

CORPORAL; MATERIAL SHALL BE A WASHABLE COTTON OR COTTON BLEND; CLOTH SHALL MEASURE 17 INCHES SQUARE WITH HEMMED EDGES ; COLOR SHALL BE A GOOD MATCH TO SUBDUED GREEN OD 7;

SHALL HAVE A SMALL BLACK CROSS (1" HIGH X 1/2" WIDE (+/-1/16") ). THE CROSS WILL BE EMBROIDERED IN THE HORIZONTAL CENTER 6-1/4 INCHES FROM THE BOTTOM EDGE OF THE CLOTH.

THREAD SHALL BE 150/2 DENIER RAYON, BRIGHT LUSTER MULTI-FILAMENT, BLACK COLOR OR AN EQUIVALENT COMMERCIAL ITEM; SHALL BE FOLDED AND PACKAGED IN A RESEALABLE POLY BAG

CLOTH, FINGER TOWEL – 9925-01-455-4583

*SPECIAL NOTE: FOR THIS PROCURMENT, THE COLOR OF THE FINGER TOWEL SHALL BE CAMO GREEN

(OD) AND MEASURE 10" X 14".

CLOTH, FINGER TOWEL; MATERIAL SHALL BE A WASHABLE COTTON OR COTTON BLEND; COLOR SHALL BE A GOOD MATCH TO SUBDUED GREEN OD 7; APPROXIMATE MEASUREMENTS ARE 17" IN LENGTH BY 8-1/2" IN WIDTH; SHALL HAVE HEMMED EDGES 3/8" (+/-1/8"); EDGES SHALL BE TOPSTITCHED;

SHALL HAVE A SMALL BLACK CROSS (1" HIGH X 1/2" WIDE (+/-1/16") ) EMBROIDERED IN THE CENTER 5" FROM TOP EDGE OF CLOTH; EMBROIDERY THREAD SHOULD CONFORM TO 150/2 DENIER RAYON, BRIGHT LUSTER, MULTIFILAMENT, BLACK COLOR; FINGER TOWEL SHALL BE FOLDED AND

PACKAGED IN A RESEALABLE POLY BAG

CLOTH, PURIFICATOR – 9925-01-455-4580

*SPECIAL NOTE: FOR THIS PROCUREMENT THE CLOTH, PURIFICATOR SHALL BE MADE IN CAMO GREEN

(OD) AND MEASURE 12" X 18" WITH BLACK CROSS.

CLOTH PURIFICATOR: MATERIAL USED FOR THE CLOTHS SHALL BE A WASHABLE COTTON OR COTTON BLEND; COLOR SHALL BE A GOOD MATCH TO SUBDUED GREEN OD 7; PURIFICATOR SHALL MEASURE APPROXIMATELY 17" IN LENGTH BY 8-1/2" IN WIDTH; SHALL HAVE HEMMED EDGES 3/8" (+/- 1/8"); TOPSTITCHED EDGES; SMALL BLACK CROSS 1" HIGH X 1/2" WIDE (+/-1/16") EMBROIDERED IN THE CENTER 5" FROM THE TOP EDGE OF CLOTH; EMBROIDERY THREAD SHALL BE 150/2 DENIER RAYON, BRIGHT LUSTER, MULTIFILAMENT, BLACK COLOR; SHALL BE FOLDED AND PACKAGED IN A

RESEALABLE POLY BAG

CONTAINER, PRIEST BREAD – 9925-01-455-4549

CONTAINER, PRIEST BREAD; SMALL METAL CONTAINER

WITH MILL FINISHED EXTERIOR AND INTERIOR;

HOLDS 15 TO 25 PIECES OF 2-3/4" PRIEST SIZE

BREADS (HOSTS); SHALL HAVE AN UNHINGED LID THAT

FITS TIGHTLY OVER THE BASE WHEN CLOSED;

SUGGESTED SIZE IS 3" IN DIAMETER (+/-.125"),

HEIGHT 7/8" (+/-.0625") WHICH INCLUDES BASE AND

LID ASSEMBLED; MAY BE A COMMERCIAL ITEM,

INCLUDING A FOOD GRADE PLASTIC CONTAINER THAT MEETS THE

DIMENSIONS AND HAS A TIGHT FITTING LID

CROSS, WOOD AND NECKLACE – 9925-01-451-2318

WOOD CROSS AND NECKLACE SHALL BE A MANUFACTURED OR COMMERCIAL ITEM MADE FROM PINE OR

SIMILAR SOFT WOOD, 3-1/4 INCHES LONG APPROXIMATELY AND CROSS BAR TWO INCHES LONG

APPROXIMATELY. THE FRONT OF THE CROSS SHALL HAVE EACH END BEVELED. A HOLE OF

SUFFICIENT DIAMETER SHALL BE DRILLED AT THE TOP OF THE CROSS FROM SIDE TO SIDE TO ALLOW A CORD TO BE THREADED THROUGH. THE CORD SHALL BE LEATHER OR IMITATION LEATHER AND A MINIMUM OF 33 INCHES LONG AND A MAXIMUM OF 37 INCHES LONG BEFORE KNOTTING THE

ENDS.

CROSS-CRUCIFIX WITH BASE – 9925-01-455-4572

CROSS-CRUCIFIX WITH BASE SHALL BE MADE OF CORROSION RESISTANT STEEL. THE CROSS SHALL BE LASER ETCHED ON BOTH SIDES OF THE CROSS. A CORPUS SHALL BE ETCHED ON THE ONE SIDE TO ACCOMMODATE CATHOLIC USE. AN "IHS" SYMBOL SHALL BE ETCHED ON THE OTHER SIDE TO ACCOMMODATE PROTESTANT USE. THE THICKNESS OF THE CROSS PORTION SHALL BE 5/32 (+/- 1/32) INCH. WHEN ASSEMBLED (CROSS ATTACHED TO THE BASE), THE CROSS AND BASE SHALL MEASURE 6-1/2 (+/- 1/4)INCHES IN HEIGHT. THE CROSS PORTION SHALL MEASURE 4-3/4 (+/- 1/4) INCHES IN HEIGHT AND 2-1/2 (+/- 1/4) INCHES WIDE AT THE CROSS BAR WHEN CROSS IS ATTACHED TO THE BASE. THE CROSS SHALL SCREW INTO THE TAPERED BASE. THE TAPERED BASE SHALL HAVE A DIAMETER OF 3-3/16 (+/- 1/4) INCHES AND A THICKNESS OF 1/16 (+/- 1/32) INCH. THE BASE ALLOWS FOR UPRIGHT DISPLAY AND SHALL BE EASILY DETACHABLE FROM THE

CROSS FOR STORAGE IN THE CARRYING CASE AS TWO PIECES.

CRUCIFIX WITH STAND – 9925-01-451-1887

CRUCIFIX; SHALL BE 4-3/4 INCHES IN LENGTH BY 2-1/2 INCHES IN WIDTH. THE MATERIALS SHALL BE 92% PEWTER METAL AND 8% HARDENED METAL OR OF SIMILAR METAL MATERIALS. THE CROSS SHALL BE MADE WITH A TAPERED END TO FIT INTO A BASE OF THE SAME METAL. THE BASE SHALL MEASURE 1-3/8 INCH SQUARE WITH A SLOT IN THE CENTER TO ACCEPT THE TAPERED END OF

THE CROSS.

CRUCIFIX WITH STAND, TRIPLE BAR, EASTERN ORTHODOX – 9925-01-451-5527

CRUCIFIX, TRIPLE BAR, EASTERN ORTHODOX CHRISTIAN STYLE; SHALL 5-1/4 INCHES IN LENGTH BY 2-3/8 INCHES WIDE AT THE CENTER BAR, 1-1/2 INCHES WIDE AT THE TOP BAR, AND 1-1/2 INCHES WIDE AT THE BOTTOM BAR. THE MATERIALS SHALL BE 92% PEWTER AND 8% HARDENED METAL OR SIMILAR METAL MATERIAL. THE CROSS SHALL BE MADE WITH A TAPERED END TO FIT INTO A BASE OF THE SAME METAL. THE BASE SHALL MEASURE 1-3/8 INCH SQUARE WITH A SLOT IN THE

CENTER TO ACCEPT THE TAPERED END OF THE CROSS.

ETERNAL LIGHT ASSEMBLY – 9925-01-464-2571

ETERNAL LIGHT ASSEMBLY; ASSEMBLY CONSISTS OF A

POST MEASURING .900 INCH IN DIAMETER BY 2 INCHES

IN HEIGHT, SAME MATERIAL AS BASE; A HOLE IS DRILLED

IN ONE END OF THE POST 3/4" DEEP TO ALLOW A SREW TO BE GLUED INTO IT THAT WILL SCREW INTO A BRASS GROMMET DESCRIBED IN THE BASE WIHTOUT THE SCREW PROTRUDING FROM THE BASE.

BRASS GROMMET SHALL HAVE AN INNER DIAMETER OF 7/32" AND AN OUTER DIAMETER OF 3/16";

POST POSITIONED ON TOP OF BASE PROTRUDING UPWARD TO SERVE AS A HOLDER FOR ALUMINUM TUBING; STAR OF DAVID, MEASURING .400 INCH BY .400 INCH IS PRESSED THROUGH TUBING;

THERE IS ALSO A CAP MADE OF ALUMINUM TUBING WITH A STAR OF DAVID PRESSED THROUGH THE CAP 1/2 INCH FROM BOTTOM OF CAP IN SUCH A WAY AS TO ALLOW FOR ALIGNMENT OF BOTH STARS

OF DAVID WHEN CAP IS PLACED OVER THE TUBE; CAP ALLOWS FOR LIGHT SECURITY, WHEN

NECESSARY, BY TURNING CAP TO ELIMINATE THE LIGHT.

SPRINKLER, HOLY WATER – 9925-01-450-8788

HOLY WATER SPRINKLER, MATERIAL SHALL BE BRASS; .32 INCH THICKNESS IN TUBE AND CAP.

OVERALL APPROX LENGTH IS 4-1/8 INCH APPROXIMATELY. PARTS CONSIST OF THE WATER TUBE, SPRINKLER HEAD, AND CLOSURE CAP. THE CLOSURE CAP SHALL BE 5/8 INCH IN DIAMETER WITH A TOP 3/4 INCH IN DIAMETER, APPROXIMATELY. THE TOP OF THE CLOSURE CAP SHALL HAVE AN ENGRAVED CROSS 5/8 INCH LONG WITH A 1/2 INCH BAR, APPROXIMATELY. THE CLOSURE CAP SHALL BE THREADED TO SCREW ONTO THE SPRINKLER HEAD. THE CLOSURE CAP SHALL HAVE A PLASTIC INSERT OR WASHER TO PREVENT LEAKAGE. THE SPRINKLER HEAD SHALL BE 1/2 INCH IN HEIGHT, APPROXIMATELY. IT SHALL BE THREADED ON BOTH ENDS IN ORDER TO SCREW INTO THE WATER TUBE AND ALLOW THE CLOSURE CAP TO SCREW ONTO IT. IT SHALL HAVE SEVEN HOLES .018 +/-.005 INCH IN DIAMETER WITH 6 HOLES SPACED AT 60 DEGREE ANGLES FROM THE CENTER HOLE. THE PORTION OF THE SPRINKLER HEAD THAT SCREWS INTO THE WATER TUBE SHALL HAVE A PLASTIC WASHER AROUND IT TO PREVENT LEAKAGE. THE WATER TUBE SHALL BE 3-5/8 INCH LONG WITH AN OUTSIDE DIAMETER OF 3/4 INCH AND INTERIOR DIAMETER OF 5/8 INCH, APPROXIMATELY. IT SHALL BE THREADED TO ALLOW THE SPRINKLER HEAD TO BE SCREWED INTO IT. EDGES OF THE TOP OF THE CLOSURE CAP AND THE CENTER RING OF THE SPRINKLER HEAD SHALL BE SERRATED TO

ALLOW EASY GRIP FOR CLOSING AND OPENING.

ICON OF CHRIST, ALTAR, LAMINATED ON WOOD – 9925-01-453-4774

ICON OF CHRIST, ALTAR, LAMINATED ON WOOD; WOOD SHALL BE WALNUT OR SIMILAR,

APPROXIMATELY 4 INCHES X 5 INCHES X 1/4 INCH THICK, NATURAL STAIN; ICON SHALL BE PAPER OR CARD STOCK, 2-3/8 X 3 INCH APPROXIMATELY AND SHALL BE MOUNTED IN THE CENTER OF THE

WOOD AND LAMINATED TO THE WOOD.

KIDDUSH CUP (CUP AND BASE)- 9925-01-463-9452

KIDDUSH CUP (CUP AND BASE); MATERIAL SHALL BE CORROSION RESISTANT STEEL FOR FIELD USE WITHOUT REQUIRING SPECIAL PROTECTION OR CLEANING; CUP EXTERIOR IS MILL FINISHED TO PREVENT REFLECTION, INTERIOR IS POLISHED FINISH; NO MARKINGS ON CUP; 2.125 INCHES DEEP. Cup- Height: 2 1/2" +/- 1/8" (when the cup and base are screwed together;diameter: 3 3/8" +/- 1/8" Base- Height: 2" tall +/- 1/8"; diameter: 3 1/8" +/- 1/8"

OIL STOCK – 9925-01-455-4761

OIL STOCK: MATERIAL SHALL BE CORROSION RESISTANT STEEL; 1" DIAMETER FOR THE INNER DIMENSION AND INCLUDE A SCREW CAP CONTAINING A CORK LINER INSIDE THE CAP; BASE: 5/8" (+/-1/16") HIGH AND THREADED; FINGER RING SHALL BE ATTACHED BY A WELDED CLIP TO THE BOTTOM OF THE OIL STOCK, SO THAT WHEN THE RING IS CLOSED AGAINST THE OIL STOCK THE PERIPHERY OF THE RING DOES NOT EXTEND MORE THAN 1/16" FROM THE OUTER FRINGE EDGE OF THE OIL STOCK; RING SHOULD HOLD ITSELF INTO PLACE BOTH WHEN CLOSED AGAINST THE BASE AND WHEN OPENED; RING SHALL MEASURE 1-3/32" OUTER DIMENSION X 7/8" INNER DIMENSION;

CLIP SHALL BE 3/8" WIDE FABRICATED FROM FLAT STOCK STAINLESS STEEL 304; MILL FINISH

EXTERIOR; NO MARKINGS ON OIL STOCK

PYX,BRASS – 9925-01-451-1930

PYX, CAPACITY OF 75 TO 100 1-1/8 INCH HOST; MATERIAL SHALL BE BRASS APPROX .062

THICKNESS, 2.500 INCH OUTSIDE DIAMETER FOR THE LID. THE CUP SHALL BE 2.370 TO ALLOW A TIGHT FIT AND A .500 HINGE. INTERIOR SHALL HAVE APPROXIMATELY GOLD PLATING. OUTSIDE FINISH SHALL BE BRUSHED TO ELIMINATE GLARE. LID SHALL HAVE ETCHED CROSS CENTERED 2

INCHES BY 2 INCHES APPROXIMATELY WITH THE WIDTH OF THE BARS BEING .375 INCH

APPROXIMATELY.

PYX, STAINLESS STEEL – 9925-01-455-4841

PYX, STAINLESS STEEL: SHALL HOLD APPROXIMATELY 35, 1-1/8" HOSTS; MATERIAL CORROSION RESISTANT STAINLESS STEEL; EXTERIOR AND INTERIOR SHALL BE OF MILL FINISH TO PREVENT GLARE; PYX SHALL HAVE NO MARKINGS; SHALL HAVE A HINGED LID; PYX TOP SHALL BE APPROX .190" DEEP BY 2.270" INNER DIMENSION; PYX TOP TO FIT TIGHTLY OVER PYX BOTTOM; PYX

BOTTOM SHALL BE APPROX .980" DEEP BY 2.190" INNER DIMENSION

RECONCILIATION STOLE – 9925-01-455-4560

*SPECIAL NOTE: THE STOLE SHALL BE MADE USING THE OPERATION ENDURING FREEDOM PATTERN RECONCILIATION STOLE; SHALL BE WHITE ON ONE SIDE AND DARK PURPLE ON THE OTHER SIDE, WITH WHITE TRIM ON BOTH SIDES; A GOLD CROSS SHALL BE EMBROIDERED ON TO EACH END, THROUGH ALL LAYERS SO THE CROSS IS VISIBLE ON EACH SIDE OF THE STOLE; CROSS IS 1-1/2" LONG, WITH A CROSS BAR OF 1" PLACED 1/2" FROM TOP OF CROSS; STOLE SHALL BE FOLDED AND

ENCLOSED IN A POLY RESEALABLE BAG

SCARF, CHAPLAIN'S OPERATIONAL CAMOUFLAGE PATTERN – 9925-01-672-8538

3 OZ. NYLON OXFORD CLOTH, COATED, CONFORMING TO TYPE I, CLASS 5 OF MIL-

DTL-508K, PRINTED IN ACCORDANCE WITH THE STANDARD SAMPLE; SEWING THREAD

SHALL CONFORM TO TYPE I OR II OF A-A-50199, SIZE 70/2 OR 3 PLY, A GOOD

MATCH TO FOLIAGE GREEN 504; STOLE SHALL BE TOPSTITCHED AND HEMMED WITH A

3/16" (+/-1/16") HEM; A BLACK CROSS SHALL BE EMBROIDERED ON TO EACH END

OF THE STOLE, WITH THE BOTTOM OF THE CROSS 2-1/2" FROM BOTTOM OF STOLE;

CROSS DIMENSIONS: 3" LONG WITH A 2-1/4" CROSS BAR 1"FROM TOP OF

CROSS;EMBROIDERED CROSS SHOULD BE APPROXIMATELY 1/4" WIDE AND THE

EMBROIDERY THREAD SHOULD CONFORM TO 150/2 DENIER RAYON, BRIGHT

LUSTER,MULTIFILAMENT, BLACK; SCARF SHALL BE FOLDED AND PACKAGED IN A

RESEALABLE POLY BAG

SCARF, PRAYER,(TALLIT), OPERATIONAL CAMOUFLAGE PATTERN (OCP)- 9925-01-673-0359

BASIC MATERIAL SHALL BE MADE IN ACCORDANCE WITH MIL-DTL-31011B TYPE II, CLASS 4; STAR

OF DAVID WITH TABLETS BENEATH STAR EMBROIDERED ON TO EACH END OF THE TALLIT

POSITIONED 2-1/2" FROM BOTTOM OF TALLIT; TABLETS CENTERED BENEATH STAR

OF DAVID; EMBROIDERY THREAD FOR THE STAR OF DAVID AND TABLETS SHALL BE A

GOOD MATCH TO FOLIAGE GREEN 502; HEBREW LETTERS REPRESENTING EACH OF THE

TEN COMMANDMENTS EMBROIDERED ON THE TABLETS IN A ROW FROM TOP TO BOTTOM,

5 PER TABLET; EMBROIDERY THREAD FOR THE HEBREW LETTERS SHALL BE A GOOD

MATCH TO DESERT SAND 503; FOLDED AND PACKAGED IN A RESEALABLE POLY BAG

SCARF, PRAYER: - 9925-01-673-0367 (TALLIT WITH TZITZIT), NYLON, OPERATIONAL CAMOUFLAGE PATTERN (OCP) WITH TZITIT SHALL BE AS FOLLOWS: BASIC MATERIAL SHALL IN ACCORDANCE WITH MIL-DTL-31033B TYPE II, CLASS 4. THE TALLIT SHALL BE MINIMUM OF 18 INCHES IN WIDTH AND

60 INCHES IN LENGTH. THE SEWING OF THE TALLIT SHALL USE POLYESTER CORE THREAD

CONFORMING TO 70/2 OR 3 PLY, AND A GOOD MATCH TO FOLIAGE GREEN 502; THE TALLIT SHALL

BE TOPSTITCHED AND HEMMED WITH A 3/16 INCH (+/-1/16 INCH) HEM. USE OF THREAD

CONTAINING LINEN PROHIBITED THROUGHOUT THE CONSTRUCTION OF THIS ITEM. . A BLACK STAR

OF DAVID SHALL BE EMBROIDERED ONTO EACH END OF THE TALLIT IMMEDIATELY ABOVE

EMBROIDERED TABLETS. THE BOTTOM LINE OF THE TABLET SHALL BE POSITIONED APPROX 3-

1/2(+/-1/4 INCH) FROM THE BOTTOM OF THE TALLIT. EACH LINE OF THE STAR OF DAVID SHALL BE ONE INCH LONG. THE TABLETS ARE CENTERED IMMEDIATELY BENEATH THE STAR OF DAVID WITH EACH TABLET MEASURING APPROX 1-3/4 INCHES IN HEIGHT AND 1/2 INCH WIDE, ENCLOSED IN AN OVERALL TABLET DESIGN MEASURING APPROX 2 INCHES HIGH AND 1-3/4 INCHES WIDE. HEBREW LETTERS REPRESENTING EACH OF THE TEN COMMANDMENTS SHALL BE EMBROIDERED ON THE TABLETS IN A ROW FROM TOP TO BOTTOM, FIVE LETTERS PER TABLET. EACH LETTER IS APPROXIMATELY 1/4 INCH IN HEIGHT AND SLIGHTLY LESS IN WIDTH DEPENDING ON THE LETTER. ALL EMBROIDERY SHALL BE A GOOD MATCH TO DESERT SAND 503. AN EYELET OF 1/4 INCH (+/-1/8") IN DIAMETER

SHALL BE SEWN IN EACH OF THE FOUR CORNERS OF THE TALLIT. THIS EYELET MUST BE

POSITIONED IN EACH CORNER, 2 INCHES (+/- 1/4") FROM THE BOTTOM EDGE AND THE SAME

DISTANCE FROM THE SIDE EDGE OF THE TALLIT. TASSELS (FRINGES, OR TZITZIT IN HEBREW) MADE FROM WOOL OR SILK THREADS SHALL BE THREADED THROUGH EACH EYELET ACCORDING TO THE INSTRUCTIONS BELOW. THE EMBROIDERY THREAD SHALL CONFORM TO 150/2 DENIER RAYON, BRIGHT LUSTER, MULTIFILAMENT, BLACK THE TALLIT SHALL BE FOLDED AND PACKAGED IN A RECLOSABLE POLY BAG. USE OF THREAD CONTAINING LINEN PROHIBITED THROUGHOUT THE CONSTRUCTION OF

THIS ITEM. . INSTRUCTIONS FOR MAKING TZITZIT: THE TASSELS (FRINGES, OR TZITZIT)

REQUIRE RABBINICAL CERTIFICATION STATING THAT THEY ARE MADE OF THREAD SPUN ESPECIALLY FOR TZITIT. THE TASSELS (FRINGES OR TZITIT) ARE TRADITIONAL AND MUST BE MADE ACCORDING TO JEWISH LAW. CERTIFIED PACKAGES OF FRINGES WILL CONTAIN 16 STRINGS, FOUR FOR EACH CORNER. FOUR OF THESE STRINGS ARE LONGER THAN THE REST, AND THEY ARE USUALLY WOUND AROUND THE OTHERS. ONE OF THESE LONGER STRINGS CALLED "SHAMASH" IS USED IN EACH CORNER AND SERVES TO MAKE THE WINDINGS. MAKE FOUR UNITS OF FOUR STRINGS EACH. EACH UNIT WILL HAVE A LONG STRING AND THREE EQUAL LENGTH STRINGS. . THE FOLLOWING SHOULD BE REPEATED FOR EACH EYELET ON EACH CORNER: 1. TAKE ALL FOUR STRINGS AND PLACE THEM THOUGH THE EYELET. ADJUST THEM SO THAT THEY ARE ALL EVEN (EXCEPT FOR THE SHAMASH, WHICH REMAINS LONGER ON ONE SIDE). FOLD THE STRINGS WITH THE EYELET AT THE CENTER OF THE FOLD. THE

FOUR STRINGS ARE NOW DOUBLED INTO EIGHT. 2. MAKE A DOUBLE KNOT (SQUARE KNOT OR A

GRANNY KNOT), WITH FOUR STRINGS ON EACH SIDE. 3. TAKE THE SHAMASH AND WIND IT AROUND THE OTHER SEVEN STRINGS. MAKE SEVEN WINDINGS. 4. MAKE ANOTHER DOUBLE KNOT. 5. MAKE EIGHT WINDINGS. 6. MAKE A DOUBLE KNOT. 7. MAKE ELEVEN WINDINGS. 8. MAKE A DOUBLE KNOT.

9. MAKE THIRTEEN WINDINGS. 10. MAKE A FINAL DOUBLE KNOT. THE TZITZIT ARE NOW COMPLETE.

THE TZITZIT SHOULD CONTAIN FIVE KNOTS AND FOUR GROUPS OF WINDINGS.

TORAH SCROLL, MINIATURE – 9925-01-463-9338

TORAH SCROLL, MINIATURE; PAPER THAT CONTAINS HEBREW SCRIPT APPROXIMATELY (5) INCHES TOP TO BOTTOM; SCROLL SHALL BE WOUND AROUND TWO HOLDERS; HOLDERS ARE APPROXIMATELY 7- 1/2 INCHES IN LENGTH (INCLUDING EXTENSION); EACH END OF HOLDERS HAS A FLAT PIECE OF METAL TO CLIP PAPER AND HOLD IT IN PLACE; EACH HOLDER HAS A ONE INCH EXTENSION ON EACH END; EACH SCROLL HAS A COVER WITH HEBREW WRITING AND JEWISH SYMBOLS ON OUTSIDE; SUEDE- LIKE TEXTURE COVER FITS OVER SCROLL WHEN CLOSED. TORAH BASE SOLD SEPARATELY UNDER NSN 9925-01-463-9451

YAD (TORAH POINTER MINIATURE)- 9925-01-463-9454

YAD (TORAH POINTER MINIATURE); SHALL BE MADE FROM A PIECE OF SMOOTH WOOD;

APPROXIMATELY 5 INCHES LONG AND 1/4 INCH IN DIAMETER; ONE END SHALL BE SHAPED INTO A

DULL POINT; FINISHED WITH A NATURAL STAIN, NON-GLOSSY.

TORAH BASE (WITH LEGS), MINIATURE – 9925-01-463-9451

TORAH BASE (WITH LEGS), MINIATURE; BASE MEASURES APPROX 4 X 5 INCHES; MADE OF CLEAR, 1/4 INCH THICK ACRYLIC; FOUR LEGS ARE 2 INCHES LONG AND 1/2 INCH DIAMETER AND SAME MATERIAL AS BASE; TORAH CAN BE INSERTED BY ONE INCH EXTENSION HANDLES ON ROLLERS;

BRASS GROMMET ALLOWS ETERNAL LIGHT ASSEMBLY TO BE PLACED ON TOP OF THE BASE. EACH BRASS GROMMET SHALL HAVE AN INNER DIAMETER OF 7/32" AND AN OUTER DIAMETER OF 3/16";

ACRYLIC PARTS SHALL HAVE AN OPAQUE FINISH. TORAH SCROLL SOLD SEPARATELY UNDER NSN 9925-01-463-9338

LIGHT,READING – 9925-01-462-0726

6000 CANDLE POWER;MULIPLE POSITION SWIVEL;HIGH IMPACT POLYCORBANATE CASEWITH

ADJUSTABLE HARD HAT HEADBAND CLIP ON BODY; POWERED BY 2AA ALKALINE BATTERIES; WILL ADJUST TO 90 DEGREES, WATERPROOF; 1 XENON 1 VERSABRITE 2250 DELUXE LIGHT KIT BRAND

NAME OR EQUAL

BAG, CHAPLAIN'S KIT – 9925-01-672-5333

OPERATIONAL CAMOUFLAGE PATTERN (OCP) SHALL BE MADE IN ACCORDANCE WITH (OPERATIONAL

CAMOUFLAGE PATTERN)IAW CR PD 04-20

PATTERN DATE: MARCH 17, 1999

INTERIM CHANGES TO CR PD 04-20:

PAGE 1, UNDER 1.1 "SCOPE", DELETE "TWO CLASSES" AND ADD "FIVE CLASSES"

PAGE 1, UNDER 1.2 "CLASSIFICATION", DELETE PARAGRAPH IN ITS ENTIRETY AND

ADD THE FOLLOWING:

"THE CARRIERS ARE OF ONE TYPE IN THE FOLLOWING CLASSES:

CLASS 1- UNIVERSAL CAMOUFLAGE (ARMY)-DELETED

CLASS 2- MCCUU CAMOUFLAGE, WOODLAND (MARINE CORPS)

CLASS 3- MCCUU CAMOUFLAGE, WOODLAND (MARINE CORPS)

CLASS 4- DIGITAL TIGER STRIPE CAMOUFLAGE (AIR FORCE)

CLASS 5- OPERATION ENDURING FREEDOM CAMOUFLAGE PATTERN (OCP)"

PAGE 2, UNDER "COMMERCIAL ITEM DESCRIPTIONS",

ADD "MIL-DTL-32072 - THREAD, POLYESTER".

PAGE 2, UNDER "DEPARTMENT OF DEFENSE

SPECIFICATIONS", DELETE

"MIL-PRF-5038 - TAPE, TEXTILE

AND WEBBING, TEXTILE, REINFORCING, NYLON"

AND ADD TO PARAGRAPH 2.3 NON-GOVERNMENT

PUBLICATION THE FOLLOWING: "PIA-T-5038 - TAPE,

TEXTILE AND WEBBING, TEXTILE, REINFORCING, NYLON

(COPIES OF THIS DOCUMENT MAY BE OBTAINED FROM

PARACHUTE INDUSTRY ASSOCIATION HEADQUARTERS,

SPECIFICATION COMMITTEE, 3833 W. OAKTON ST.,

SKOKIE, IL., 60076 OR AT HTTP://WWW.PIA.COM)".

PAGE 2, UNDER 2.2.1 "DEPARTMENT OF DEFENSE SPECIFICATIONS" ADD THE

FOLLOWING:

"YACL-05-1- CLOTH, TWILL, AIR FORCE DIGITAL TIGER STRIPE PRINT

CAMOUFLAGE PATTERN;

MIL-DTL-44436A- CLOTH, CAMOUFLAGE PATTERN, WIND RESISTANT POPLIN,

NYLON/COTTON BLEND;

MIL-PRF-MCCUU C- UNIFORM, COMBAT/UTILITY, CAMOUFLAGE PATTERN, MARINE

CORPS"

PAGE 4, UNDER 3.4.1 "BASIC MATERIAL", DELETE PARAGRAPH IN ITS ENTIRETY

AND ADD THE FOLLOWING:

"3.4.1 BASIC MATERIAL. THE MATERIAL FOR THE CARRIER, INSIDE POCKET, AND

SNAP FASTENER REINFORCEMENT PIECES SHALL BE MADE IN ACCORDANCE WITH THE

FOLLOWING:

3.4.1.1 CLASS 2. MIL-PRF-MCCUU C, CLOTH TYPE I, WOODLAND MARPAT

CAMOUFLAGE PRINTED.

3.4.1.2 CLASS 3. MIL-PRF-MCCUU C CLOTH TYPE II, DESERT MARPAT

CAMOUFLAGE PRINTED.

3.4.1.3 CLASS 4. YACL-05-1, TYPE III, CLASS 1, MIDWEIGHT CLOTH

NYLON/COTTON WATER REPELLENT TREATED.

3.4.1.4 CLASS 5. MIL-DTL-44436A, CLASS 10, OPERATION ENDURING FREEDOM

CAMOUFLAGE PATTERN (OCP), WATER REPELLENT TREATED.

PAGE 4 UNDER 3.4.2.1 "WIDTH- 2-1/4 INCHES", DELETE CAMOUFLAGE GREEN

483... CLASS 2 CARRIER. AND ADD THE FOLLOWING:

"FOR CLASS 2 CARRIER, THE WEBBING SHALL BE A GOOD MATCH TO CAMOUFLAGE

GREEN 483. THE WEBBING FOR CLASS 3 CARRIER SHALL BE A GOOD MATCH TO

KHAKI P-1. FOR CLASS 4 CARRIER, THE WEBBING SHALL BE A GOOD MATCH TO AF

SAGE GREEN SHADE 1641. FOR CLASS 5 CARRIER, THE WEBBING SHALL BE A GOOD

MATCH TO TAN 499."

PAGE 4, UNDER 3.4.2.2 "WIDTH- 1 INCH", LINE 3, DELETE

"MIL-W-43668" AND SUBSTITUTE "A-A-55301".

lINE 4-5, DELETE "CAMOUFLAGE GREEN 483...CLASS 2 CARRIER AND ADD THE

FOLLOWING:

"FOR CLASS 2 CARRIER, THE WEBBING SHALL BE A GOOD MATCH TO CAMOUFLAGE

GREEN 483. THE WEBBING FOR CLASS 3 CARRIER SHALL BE A GOOD MATCH TO

KHAKI P-1. FOR CLASS 4 CARRIER, THE WEBBING SHALL BE A GOOD MATCH TO AF

SAGE GREEN SHADE 1641. FOR CLASS 5 CARRIER, THE WEBBING SHALL BE A GOOD

MATCH TO TAN 499."

PAGE 4, UNDER 3.4.2.3 "WIDTH 3/4 INCH", DELETE "CAMOUFLAGE GREEN

483...CLASS 2 CARRIER" AND ADD THE FOLLOWING:

"FOR CLASS 2 CARRIER, THE WEBBING SHALL BE A GOOD MATCH TO CAMOUFLAGE

GREEN 483. THE WEBBING FOR CLASS 3 CARRIER SHALL BE A GOOD MATCH TO

KHAKI P-1. FOR CLASS 4 CARRIER, THE WEBBING SHALL BE A GOOD MATCH TO AF

SAGE GREEN SHADE 1641. FOR CLASS 5 CARRIER, THE WEBBING SHALL BE A GOOD

MATCH TO TAN 499."

PAGE 4, UNDER 3.4.3 "FASTENER TAPE" DELETE "CAMOUFLAGE GREEN 483...

CLASS 2 CARRIER" AND ADD THE FOLLOWING:

"FOR CLASS 2 CARRIER, THE FASTENER TAPE SHALL BE A GOOD MATCH TO

CAMOUFLAGE GREEN 483. THE FASTENER TAPE FOR CLASS 3 CARRIER SHALL BE A

GOOD MATCH TO KHAKI P-1. FOR CLASS 4 CARRIER, THE FASTENER TAPE SHALL

BE A GOOD MATCH TO AF SAGE GREEN SHADE 1641. FOR CLASS 5 CARRIER, THE

WEBBING SHALL BE A GOOD MATCH TO TAN 499."

PAGE 5, UNDER 3.4.4 "BINDING" LINE 2, DELETE

"MIL-T-5038 AND SUBSTITUTE "PIA-T-5038"

LINE3-4, DELETE "CAMOUFLAGE GREEN 483... CLASS 2 CARRIER" AND ADD THE

FOLLOWING:

"FOR CLASS 2 CARRIER, THE BINDING SHALL BE A GOOD MATCH TO CAMOUFLAGE

GREEN 483. THE BINDING FOR CLASS 3 CARRIER SHALL BE A GOOD MATCH TO

KHAKI P-1. FOR CLASS 4 CARRIER, THE BINDING SHALL BE A GOOD MATCH TO AF

SAGE GREEN SHADE 1641. FOR CLASS 5 CARRIER, THE WEBBING SHALL BE A GOOD

MATCH TO TAN 499."

PAGE 5, UNDER 3.4.7 "THREAD" LINE 2, DELETE

"V-T-285" AND SUBSTITUTE "MIL-DTL-32072".

LINE 2-3, DELETE "CAMOUFLAGE GREEN 483... CLASS 2 CARRIERS." AND ADD THE

FOLLOWING:

"FOR CLASS 2 CARRIER, THE THREAD SHALL BE A GOOD MATCH TO CAMOUFLAGE

GREEN 483. THE THREAD FOR CLASS 3 CARRIER SHALL BE A GOOD MATCH TO

KHAKI P-1. FOR CLASS 4 CARRIER, THE THREAD SHALL BE A GOOD MATCH TO AF

SAGE GREEN SHADE 1641. FOR CLASS 5 CARRIER, THE WEBBING SHALL BE A GOOD

MATCH TO TAN 499."

PAGE 5, UNDER 3.4.13.1 "IDENTIFICATION LABEL", DELETE "THE LABEL'S

COLOR... CLASS 2 CARRIERS" AND ADD THE FOLLOWING:

"THE LABEL'S COLOR SHALL APPROXIMATE MEDIUM GREEN, CABLE NO. 70034,

70130, OR 70131 FOR CLASS 2 CARRIERS. FOR CLASS 3 AND CLASS 5 CARRIERS,

THE LABEL'S COLOR SHALL APPROXIMATE KHAKI, CABLE NO. 70188. THE LABEL

SHALL APPROXIMATE GREEN 354 FOR CLASS 4 CARRIERS."

PAGE 6, UNDER 3.4.13.1 "IDENTIFICATION LABEL", DELETE IN ITS ENTIRETY

AND INSERT THE FOLLOWING NEW LABEL EXAMPLES:

"FOR CLASS 2:

9925-01-567-7285

CARRIER, CHAPLAIN'S KIT, MCCUU WOODLAND CAMOUFLAGE

(EMPTY CARRIER ONLY)

CONTRACT NO.:

CONTRACTOR'S NAME:

FOR CLASS 3:

9925-01-567-8990

CARRIER, CHAPLAIN'S KIT, MCCUU DESERT CAMOUFLAGE

(EMPTY CARRIER ONLY)

CONTRACT NO.:

CONTRACTOR'S NAME:

FOR CLASS 4:

9925-01-567-8972

CARRIER, CHAPLAIN'S KIT, DIGITAL TIGER STRIPE CAMOUFLAGE

(EMPTY CARRIER ONLY)

CONTRACT NO.:

CONTRACTOR'S NAME:

FOR CLASS 5:

9925-01-XXX-XXXX

CARRIER, CHAPLAIN'S KIT, OPERATION ENDURING FREEDOM CAMOUFLAGE

(EMPTY CARRIER ONLY)

CONTRACT NO.:

CONTRACTOR'S NAME:

PAGE 5, PARAGRAPH 3.4.6 SNAP FASTENER,

DELETE THE SENTENCE AND SUBSTITUTE: "THE SNAP

FASTENERS FOR ATTACHING THE BOTTOM OF THE

VERTICAL STRAPS TO THE BOTTOM OF THE BACK OF THE

CARRIER SHALL BE IN ACCORDANCE WITH

NASM 27980-2B. THE SNAP FASTENERS SHALL HAVE

A BLACK CHEMICAL FINISH EXCEPT THAT THE BUTTON

CAP SHELLS MAY HAVE A BLACK BAKED ON ENAMEL

FINISH."

INTERIM CHANGES TO A-A-55126B,

THE FOLLOWING CHANGES ARE FOR ALL CURRENT, PENDING AND FUTURE

PROCUREMENTS OF THE SUBJECT DOCUMENT UNTIL SUCH TIME AS THE DOCUMENT IS

AMENDED OR REVISED.

PAGE 4. TABLE I, PHYSICAL REQUIREMENTS, CHARACTERISTIC, SHEAR

STRENGTH,DELETE LBS/SQ INCH (MIN), ADD SHEAR STRENGTH, LBS/2 SQ INCH

(MIN).

PAGE 5 TABLE II, PHYSICAL REQUIREMENTS; CHARACTERISTIC, LENGTH

DIMENSIONAL STABILITY, % (MAX); LOOP, ALL CLASSES DELETE .0; ADD ALL

CLASSES 4.0.

PAGE 7, Paragraph 3.10.2, Change the following title of paragraph from:

"Fray resistance of Universal Camouflage Shades" and replace with "Fray resistance of Camouflage Prints"

PAGE 14, Paragraph 7.3.4 Change the following title of paragraph from:

Fray resistance for Universal Camouflage Shades." and replace with "Fray resistance for Camouflage Prints."

ADDITIONAL INFORMATION FOR A-A-55301:

PAGE 3, UNDER TABLE I, PHYSICAL REQUIREMENTS, THICKNESS INCHES, TYPE II,

DELETE TYPE II,0.075 + 0.007; REPLACE WITH TYPE II, 0.075 +/- 0.007;

DELETE TYPE III, 0.046 + 0.007; REPLACE WITH TYPE III, 0.046 +/- 0.007;

DELETE TYPE III (ALTERNATE),0.046 + 0.007; REPLACE TYPE III (ALTERNATE),

0.046+/- 0.007. (3/07/2007)

PAGE 3, TABLE I PHYSICAL REQUIREMENTS FOR THICKNESS INCHES 2/, UNDER

COLUMN FOR TYPE II, DELETE 0.075 + 0.007; REPLACE WITH 0.075 +/- 0.007;

AND FOR TYPE III, DELETE 0.046 + 0.007 AND REPLACE WITH 0.046 +/- 0.007;

(12/04/2014)

TABLE I PHYSICAL REQUIREMENTS-(CONT) FOR THICKNESS INCHES 2/ UNDER

COLUMN FOR TYPE III (ALTERNATE), DELETE 0.046 + 0.007 AND REPLACE WITH

0.046 +/-0.007. (12/04/2014)

INTERIM CHANGES FOR A-A-55301, DATED NOVEMBER 15, 1996

PAGE 3, TABLE I; ADD THE FOLLOWING NEW CHARACTERISTIC AND REQUIREMENTS

IN BETWEEN COLUMNS FOR "TYPE III (ALTERNATE) AND TYPE VI":

TYPE III (HYBRID)

WIDTH, INCHES: 1 +/- 1/16

THICKNESS INCHES 2/: 0.046 +/- 0.007

WEIGHT OZ/LIN. YD (MIN) 3/: 0.65

STIFFNESS LOAD POUNDS WIDTHWISE ONLE 4/: - - -

WARP ENDS, FULL WIDTH:

FACE, BACK AND MIDDLE WARPS (MIN): ---

FACE AND BACK (MIN): 100

BINDER WARP (MIN): 18

STUFFER WARP (MIN): ---

PICKS/INCH (MIN)

PICKS/INCH (MIN) (SHUTTLELESS LOOM): 75 1/

BREAKING STRENGTH, LBS (MIN) 5/: 1000

ADD THE FOLLOWING NEW PARAGRAPH:

3.4.5.1 TYPE III HYBRID: THE WEBBING SHALL BE A TUBLAR PLAIN WEAVE,

WEAVING 2 ENDS AS 1 OR EQUIVALENT BOUND TOGETHER BY A BINDER WEAVING 2

UP AND 2 DOWN, THE ADJACENT FINDER WEAVING 2 DOWN AND 2 UP. (SEE FIG.

8) (ADDED AUGUST 29, 2007)

add the following: "ADD "NOTE: MIL-DTL-32072 IS CANCELLED AND REPLACED

BY A-A-59963, THREAD POLYESTER, DATED 26 FEBRUARY 2016"

add the following: "NOTE: MIL-DTL-32072 IS CANCELLED AND REPLACED BY A-

A-59963, THREAD POLYESTER, DATED 26 FEBRUARY 2016."

DELETE CHANGES BELOW IN THEIR ENTIRETY.

1. DELETE PARAGRAPH 3.3.1 MATCHING ENTIRELY AND CHANGE TO THE FOLLOWING:

3.3.1 SHADE MATCHING. THE SHADE OF THE THREAD SHALL BE A GOOD (GOOD IS

DEFINED AS A PERCEPTIBLE NOT APPRECIABLE DIFFERENCE IN COLOR) MATCH TO

THE STANDARD SAMPLE OR IF NOT AVAILABLE, THE END ITEM BASE CLOTH WHEN

TESTED AS SPECIFIED IN 4.5.1.2.

2. IN TABLE VIII END ITEM TESTS, DELETE LIGHT TEST METHOD AATCC 16 OPT A

AND CHANGE TO READ AS AATCC 16 OPT I OR 3.

4.5.1 DELETE SHADE MATCH EVALUATION AND CHANGE TO VISUAL SHADE MATCHING

EVALUATION.

4.5.1.2 DELETE VISUAL SHADE MATCHING IN ITS ENTIRETY AND CHANGE TO THE

FOLLOWING:

4.5.1.2 VISUAL SHADE MATCHING EVALUATION. THE SAMPLE SHALL BE WOUND OR

PREPARED FOR EXAMINATION IN A MANNER SIMILAR TO THAT FOR THE STANDARD

SHADE SAMPLE. THE COLOR AND APPEARANCE OF THE THREADS SHALL MATCH THE

STANDARD SAMPLE WHEN VIEWED USING THE AATCC EVALUATION PROCEDURE 9,

OPTION A OR C, WITH SOURCES SIMULATING ARTIFICIAL DAYLIGHT D75

ILLUMINANT WITH A COLOR TEMPERATURE OF 7500 (± 200)degrees K

ILLUMINATION OF 100 (± 20) FOOT CANDLES, AND SHALL BE A GOOD MATCH TO

THE STANDARD SAMPLE UNDER INCANDESCENT LAMPLIGHT AT 2856 (± 200)degrees K.

"ADD "NOTE: MIL-DTL-32072 IS CANCELLED AND REPLACED BY A-A-59963, THREAD

POLYESTER, DATED 26 FEBRUARY 2016"

ADDITIONAL INFORMATION FOR L-P-390C:

L-P-390C IS INACTIVE FOR NEW DESIGN

REFER TO ASTM-D-4976

WEBBING TEXTILE, WOVEN NYLON; SHALL BE MADE

ACCORDING TO SPECIFICATION MIL-W-4088K DATED

21 NOVEMBER 1988

THESE CHANGES DATED 13 NOVEMBER 2009 FOR OCP (OPERATION ENDURING FREEDOM

CAMOUFLAGE PATTERN) CONTRACTS ONLY!

CHANGES TO MIL-W-4088K (NOVEMBER 21, 1988)

FOR

WEBBING, TEXTILE, WOVEN NYLON

OPERATION ENDURING CAMPUFLAGE PATTERN (OCP)

WHEN CLASS 2 - OCP IS SPECIFIED IN THE CONTRACT OR ORDER, THE FOLLOWING

CHANGES SHALL APPLY.

PARAGRAPH 2.2 OTHER PUBLICATIONS. DELETE IN ITS ENTIRETY AND REPLACE

WITH THE FOLLOWING:

2.2 NON-GOVERNMENT STANDARDS AND OTHER PUBLICATIONS. THE

FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED

HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS ARE

THOSE CITED IN THE SOLICITATION OR CONTRACT.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

AATCC 8 - COLORFASTNESS TO CROCKING

AATCC-16 - COLORFASTNESS TO LIGHT

AATCC-61 - COLORFASTNESS TO LAUNDERING: ACCELERATED

AATCC EVALUATION PROCEDURE 1, GRAY SCALE FOR COLOR CHANGE

AATCC EVALUATION PROCEDURE 2, GRAY SCALE FOR STAINING

AATCC EVALUATION PROCEDURE 8, AATCC 9-STEP CHROMATIC

TRANSFERENCE SCALE

AATCC EVALUATION PROCEDURE 9, VISUAL ASSESSMENT OF COLOR

DIFFERENCES OF TEXTILES

(COPIES OF DOCUMENTS ARE AVAILABLE ONLINE AT WWW.AATCC.ORG

OR FROM THE AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS, P.O.

BOX 12215, RESEARCH TRIANGLE PARK, NC 27709-2215.)

PARAGRAPH 2.3 ORDER OF PRECEDENCE. ADD "UNLESS OTHERWISE STATED HEREIN

OR IN THE CONTRACT," TO THE BEGINNING OF THE PARAGRAPH.

PARAGRAPH 3.4.2 MATCHING DELETE IN ITS ENTIRETY AND CHANGE TO THE

FOLLOWING:

3.4.2 COLOR MATCHING THE COLOR OF THE FINISHED WEBBING SHALL MATCH THE

STANDARD SAMPLE WHEN TESTED AS SPECIFIED IN 4.5.3.

ADD 3.4.4.1 DELETE SPECTRAL REFLECTANCE REQUIREMSNT IN ITS ENTIRELY AND

SUBSTITUTE THE FOLLOWING:

SPECTRAL REFLECTANCE REQUIREMENTS :TAN 499

WAVELENGTH, NANOMETERS (nm) TAN 499

MIN MAX

600 8 26 620 8 26 640 8 30 660 8 34 680 12 38 700 12 40 720 16 46 740 22 50 760 ` 30 50 780 34 54 800 36 56 820 38 58 840 38 58 860 40 60

PARAGRAPH 4.4.3 END ITEM TESTING: 2ND LINE AFTER"FOLLOWED" ADD, "UNLESS

OTHERWISE SPECIFIED".

TABLE VII TEST METHODS. THE FOLLOWING CHANGES OR ADDITIONS SHALL BE

ADDED TO TABLE VII.

COLUMN 1 AFTER THE WORD LIGHT- ADD (20 HRS OR 85kJ)

COLUMN 3 DELETE TEST METHOD 5660 AND CHANGE TO AATCC 16

OPTION 1 OR 3 4/

COLUMN 3 DELETE TEST METHOD 5614 AND CHANGE TO AATCC 61 1A 3/

COLUMN 3 DELETE TEST METHOD 5651 AND CHANGE TO AATCC 8 5/

THE FOLLOWING CHANGES ARE ALSO MADE TO THE FOOTNOTES BELOW TABLE

VII:

ADD FOOTNOTE 3/ RATED USING THE AATCC EVALUATION PROCEDURE 1,

GRAY SCALE FOR COLOR CHANGE AND AATCC EVALUATION PROCEDURE 2,

GRAY SCALE FOR STAINING.

ADD FOOTNOTE 4/ RATED USING THE AATCC EVALUATION PROCEDURE 1,

GRAY SCALE FOR COLOR CHANGE.

ADD FOOTNOTE 5/ RATED USING THE AATCC EVALUATION PROCEDURE 8,

9-STEP CHROMATIC TRANSFERENCE SCALE.

DELETE PARAGRAPH 4.5.2 SPECTRAL REFLECTANCE MEASUREMENTS IN THE

VISIBLE/NEAR INFRARED. AND CHANGE TO THE FOLLOWING:

4.5.2. SPECTRAL REFLECTANCE. FINISHED FOLIAGE GREEN 504 WEBBING

GREATER THAN 1 ¼ INCHES IN WIDTH SHALL MEET THE SPECTRAL REFLECTANCE

FACTORS (IN PERCENT) FOR THE VISIBLE SPECTRAL REFLECTANCE DATA SHALL BE

OBTAINED FROM 600 TO 860 NANOMETERS (NM) AT 20 NM INTERVALS ON A

SPECTROPHOTOMETER RELATIVE TO THE BARIUM SULFATE STANDARD, THE

PREFERRED WHITE STANDARD. OTHER WHITE REFERENCE MATERIALS MAY BE USED

PROVIDED THEY ARE CALIBRATED TO ABSOLUTE WHITE, E.G. MAGNESIUM OXIDE OR

VITROLITE TILES. THE SPECTRAL BAND WIDTH SHALL BE LESS THAN 26 NM AT

860 NM. REFLECTANCE MEASUREMENTS SHALL BE MADE BY EITHER THE

MONOCHROMATIC OR POLYCHROMATIC MODE OF OPERATION. WHEN THE

POLYCHROMATIC MODE OF OPERATION IS USED, THE SPECTROPHOTOMETER SHALL

OPERATE WITH THE SPECIMEN DIFFUSELY ILLUMINATED WITH THE FULL EMISSION

OF A CONTINUOUS SOURCE THAT SIMULATES EITHER CIE SOURCE A OR CIE

SOURCE D65. MEASUREMENTS SHALL BE TAKEN ON A MINIMUM OF TWO (2)

DIFFERENT AREAS AND THE DATA AVERAGED. THE SPECIMEN SHALL BE MEASURED

AS A SINGLE LAYER BACKED WITH TWO LAYERS OF THE SAME WEBBING AND SHADE.

THE SPECIMEN SHALL BE VIEWED AT AN ANGLE NO GREATER THAN 10° FROM

NORMAL, WITH THE SPECULAR COMPONENT INCLUDED. MEASUREMENTS SHALL BE

TAKEN ON A MINIMUM OF TWO DIFFERENT AREAS. SPECIMENS SHALL BE ORIENTED

IN DIFFERENT DIRECTIONS DURING TESTING. WHEN POSSIBLE, THE SPECIMENS

TESTED SHALL NOT CONTAIN THE SAME YARNS WHEN PRESENTED TO THE SAMPLE

PORT. PHOTOMETRIC ACCURACY OF THE SPECTROPHOTOMETER SHALL BE WITHIN 1

PERCENT AND WAVELENGTH ACCURACY WITHIN 2 NM. THE DIAMETER FOR STANDARD

APERTURE SIZE USED IN THE COLOR MEASUREMENT DEVICE SHALL BE 1.0 TO

1.25 INCHES IN DIAMETER. WHEN THE MEASURED SPECTRAL REFLECTANCE VALUES

FALL OUTSIDE THE LIMITS AT FOUR OR MORE OF THE WAVELENGTHS SPECIFIED IN

3.4.4.1 IT SHALL BE CONSIDERED A TEST FAILURE.

DLETE PARAGRAPH 4.5.3 IN IT'S ENTIRELY SUBSTITUTE WITH CORRECTED

PARAGRAPH BELOW. NOTE THE ONLY CHANGE IS IN REFERENCE TO (+) SHOULD BE

4.5.3 VISUAL COLOR MATCHING. THE COLOR AND APPEARANCE OF THE WEBBING

SHLL MATCH THE STANDARD SAMPLE VIEWED USING THE AATCC EVALUATION

PROCEDURE 9, OPTION A OR C, WITH SOURCES SIMULATING ARTIFICIAL DAYLIGHT

D75 ILLUMINANT WITH A COLOR TEMPERATURE OF 7500 (+/- 200)DEGREE K

ILLUMINATION OF 100 (+/-20) FOOT CANDLES, AND SHALL BE A GOOD MATCH TO

THE STANDARD SAMPLE UNDER INCANDESCENT LAMPLIGHT AT 2856 (+/-200) DEGREE

K.

NOTE: SPECTAL REFLEDTANCE REQUIREMENTS CHANGES APPLICABLE TO THE

REFERENCED DOCUMENT AND ITS COMPONENT MATERIALS ARE LISTED BELOW:

CHANGES APPLY TOT HE DOCUMENTS AFFECTED BY TAN 499 LISTED BELOW:

FQ/PD-07-05 - IOTV

GL/PD-05-03 - MOLLE

GL/PD-04-12A - MOLLE

GL/PD-06-30 - MOLLE

CO/PD-02-05A - MOLLE

ADDITIONAL INFORMATION FOR MIL-PRF-5038:

ALL STANDARD SAMPLE INFORMATION WILL STILL APPLY.

STANDARD SAMPLES ARE AS FOLLOWS:

TAN 380, TYPE III, ROLL #3497, FOR SHADE, APPEARANCE AND COLORFASTNESS.

TAN 380, TYPE II, ROLL #3498, FOR SHADE, APPEARANCE AND COLORFASTNESS.

BLACK 375, TYPE III, ROLL #3443, FOR SHADE, APPEARANCE AND

COLORFASTNESS.

OLIVE DRAB 7, TYPE IV, ROLL #3012, FOR SHADE, FINISH AND COLORFASTNESS.

CAMOUFLAGE GREEN 483, TYPE II, ROLL #3484, FOR SHADE, APPEARANCE AND

COLORFASTNESS.

CAMOUFLAGE GREEN 483, TYPE III, ROLL #3485 FOR SHADE, APPEARANCE AND

COLORFASTNESS.

CAMOUFLAGE GREEN 483, TYPE IV, ROLL #3486, FOR SHADE, APPEARANCE AND

COLORFASTNESS.

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729 (THE

FOLIAGE GREEN 502 AREA OF THE PATTERN).

STANDARD SAMPLE FOR DESERT SAND 503 IS MIL-C-44436, ROLL #3729 (THE

DESERT SAND 500 AREA OF THE PATTERN).

FOLIAGE GREEN 504/DESERT SAND 503 IS TO BE USED AS SPECIFIED BY

CONTRACT. THIS APPLIES TO TYPE III.

ADDITIONAL INFORMATION FOR MIL-H-9890E/1

HARDWARE, INDIVIDUAL LOAD CARRYING

EQUIPMENT, AND HARWARE, MISCELLANEOUS

7/31/97.

NO ADDITIONAL INFORMATION FOLLOWS.

MIL-DTL-43734E, DATED 22 SEPTEMBER 2005 CONTAINS ERRORS AND

SHOULD NOT BE USED. USERS SHOULD DESTROY ALL COPIES OF MIL-DTL-43734E.

USERS SHOULD USE MIL-C-43734D UNTIL REVISION F IS FINALIZED & PUBLISHED.

OR USE GL/PD 10-07, DATED 26 OCTOBER 2009.

ADDITIONAL INFORMATION FOR MIL-C-43734D,

3/24/06:

STANDARD SAMPLE FOR CLASS 1, SHADE BLACK

375 IS IDENTIFIED AS ROLL NO. 3442 AND

REFERENCED FOR SHADE APPEARANCE

STANDARD SAMPLE FOR CLASS 1, TAN 495 IS

IDENTIFIED AS ROLL NO. 3503 AND REFERENCED

FOR SHADE ONLY.

STANDARD SAMPLE FOR ALL CLASSES OF WOODLAND

PRINTED CAMOUFLAGE IS IDENTIFIED AS

ROLL NO. 3677 AND REFERENCED FOR SHADE,

APPEARANCE AND COLORFASTNESS.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREE 504 IS

IDENTIFIED AS ROLL #3721(THE FOLIAGE GREEN 502

AREA OF THE PATTERN), AND IS REFERENCED FOR

SHADE ONLY.

STANDARD SAMPLE FOR UNIVERSAL CAMOUFLAGE PATTERN IS IDENTIFIED

AS ROLL #3746.

INTERIM CHANGES TO MIL-C-43734D:

PAGE 1:

PARA. 1.2, CLASS 1 AND CLASS 3: DELETE "OLIVE

GREEN 106" AND SUBSTITUTE "CAMOUFLAGE GREEN 483"

IN BOTH LOCATIONS.

PAGE 4:

PARA. 3.4.1, LINE 2, AFTER THE WORD "BE" DELETE

REMAINDER AND SUBSTITUTE "CAMOUFLAGE GREEN 483.

WHEN SPECIFIED THE COLOR SHALL BE FOLIAGE

GREEN 504. (SEE 6.5.1)."

PAGE 4, PARA. 3.4.2 LINE 1, AT THE

BEGINNING OF THE FIRST SENTENCE ADD:

UNLESS OTHERWISE SPECIFIED AND

AT LINE 8, AT THE END OF THE PARAGRAPH ADD:

"WHEN SPECIFIED THE COLOR SHALL BE

UNIVERSAL CAMOUFLAGE.".

PAGE 4, PARA. 3.4.4.2, LINE 4, DELETE

"+1.25, -2.50" AND SUBSTITUTE "+1.75".

PAGE 5, DELETE 3.4.6 IN IT'S ENTIRITY AND

SUBSTITUTE " 3.4.6 INFRARED REFLECTANCE

REQUIREMENTS. CLASSES 2, 4 AND 5 SHALL CONFORM

TO THE INFRARED REFLECTANCE REQUIREMENTS

SPECIFIED IN TABLE I, AND CLASSES 1 AND 3 SHALL

CONFORM TO THE INFRARED REFLECTANCE REQUIREMENTS

SPECIFIED IN TABLE IA, BOTH INITIALLY AND AFTER

3 ACCELERATED LAUNDERINGS WHEN TESTED AS

SPECIFIED IN 4.4.3

DELETE TABLE I IN ITS ENTIRETY AND SUBSTITUTE

TABLE I. SPECTRAL REFLECTANCE REQUIREMENTS,WOODLAND

CAMOUFLAGE CLASSES 2, 4, AND 5

REFLECTANCE VALUES (PERCENT)

WOODLAND CAMOUFLAGE

WAVELENGTH BLACK 357 LIGHT GREEN 354 DARK GREEN

NAMOMETERS MIN. MAX. MIN. MAX. AND BROWN 356

. MIN. MAX.

600 -- -- 8 20 3 9 620 -- -- 8 20 3 9 640 -- -- 8 20 3 9 660 -- -- 8 20 3 12 680 -- -- 10 30 3 14 700 -- 20 18 50 5 28 720 -- 30 22 54 7 44 740 -- 33 30 56 12 52 760 -- 33 35 58 18 56 780 -- 34 40 62 26 56 800 -- 34 55 80 34 56 820 -- 35 55 80 42 60 840 -- 35 55 82 44 60 860 -- 35 60 82 44 60

AFTER TABLE I INSERT TABLE IA

"TABLE IA SPECTRAL REFLECTANCE (PERCENT) FOR

CAMOUFLAGE GREEN 483, CLASSES 1 AND 3

WAVELENGTH, MIN MAX

NANOMETERS MIN MAX MIN MAX MIN MAX

(NM)

600 3 10 620 3 10 640 3 10 660 3 12 680 3 14 700 4 28 720 5 40 740 10 52 760 18 56 780 20 56 800 24 58 820 30 60 840 38 60 860 40 60

PAGE 6:

PARA. 3.7.1. LINE 2, DELETE " AND A FLUOROCARBON

EXTENDER" AND SUBSTITUTE " AND, OPTIONALLY, A

MELAMINE HYDROPHOLE ".

PAGE 6, TABLE II:

YARNS PER INCH, WARP, UNDER CLASS 4 MAX:

DELETE "48", UNDER CLASS 5 MIN: DELETE "50"

AND SUBSTITUTE "48".

YARNS PER INCH, FILLING, UNDER CLASS 4 MAX:

DELETE "35".

BREAKING STRENGTH, WARP, UNDER CLASS 4 MIN:

DELETE "325" AND SUBSTITUTE "300", UNDER CLASS 5

MIN: DELETE "325" AND SUBSTITUTE "275".

BREAKING STRENGTH, FILLING, UNDER CLASS 4 MIN:

DELETE "250" AND SUBSTITUTE "225", UNDER CLASS 5

MIN: DELETE "225" AND SUBSTITUTE "200".

PAGE 14, UNDER DIMENSIONAL STABILITY ADD

"SPECTRAL REFLECTANCE: (ALL CLASSES)

INITIAL 3.4.6 4.5.1

ACCELERATED LAUNDERING (3 CYCLES) 3.4.6

AATCC 61 OPT 3A 7/& 4.5.1

PAGE 15 AFTER 6/ INSERT " 7/ A 4 GRAM SAMPLE

SIZE SHALL BE USED. FOR CLASSES 2, 4, AND 5

EACH COLOR SHALL BE TESTED SEPERATLY. (NOTE

A SAMPLE SIZE LARGE ENOUGH TO EVALUATE SPECTRAL

REFLECTANCE SHALL BE USED). TEN (10) STAINLESS

.SPHERES AND 1993 AATCC STANDARD REFERENCE

DETERGENT WITHOUT OPTICAL BRIGHTENER SHALL

BE USED

PAGE 17:

PARA. 6.5.1: DELETE AND SUBSTITUTE THE

FOLLOWING: "6.5.1 CLASSES 1 AND 3. THE FOLLOWING

DYES HAVE BEEN FOUND TO BE ACCEPTABLE FOR DYEING

CAMOUFLAGE GREEN 483. ACID ORANGE 162,

ACID BLUE 171"

PAGE 18:

DELETE "6.6.1" AND "6.6.2" AND SUBSTITUTE:

"6.6.1 CLASSES 1, 2, AND 3. CLASSES 1, 2 AND

3 WARP AND FILLING NOMINAL YARN SIZES OF 1000

DENIER, AIR TEXTURED, HIGH TENACITY, TYPE 440

CORDURA NYLON, AND NOMINAL YARN SIZES OF 950

DENIER, AIR TEXTURED, HIGH TENACITY, ANSO-TEX

ARE SATISFACTORY FOR THE MANUFACTURE OF THESE

CLOTHS."

6.6.2 CLASSES 4 AND 5. CLASSES 4 AND 5 WARP

AND FILLING NOMINAL YARN SIZES OF 500 DENIER

AIR TEXTURED, HIGH TENACITY, TYPE 440 CORDURA

NYLON OR ANSO-TEX NYLON ARE SATISFACTORY FOR THE

MANUFACTURE OF THESE CLOTHS."

NEW PARAGRAPH:

"6.6.3 YARN SOURCES. THE TYPE 440 CORDURA

NYLON YARNS ARE OBTAINABLE FROM E.I.DUPONT DE

NEMOURS CO., WILMINGTON, DE. 19898, AND THE

ANSO-TEX NYLON YARNS ARE OBTAINABLE FROM

ALLIED FIBERS, NEW YORK, NY."

ADDITIONAL INFORMATION FOR MIL-PRF-5038:

ALL STANDARD SAMPLE INFORMATION WILL STILL APPLY.

STANDARD SAMPLES ARE AS FOLLOWS:

TAN 380, TYPE III, ROLL #3497, FOR SHADE, APPEARANCE AND COLORFASTNESS.

TAN 380, TYPE II, ROLL #3498, FOR SHADE, APPEARANCE AND COLORFASTNESS.

BLACK 375, TYPE III, ROLL #3443, FOR SHADE, APPEARANCE AND

COLORFASTNESS.

OLIVE DRAB 7, TYPE IV, ROLL #3012, FOR SHADE, FINISH AND COLORFASTNESS.

CAMOUFLAGE GREEN 483, TYPE II, ROLL #3484, FOR SHADE, APPEARANCE AND

COLORFASTNESS.

CAMOUFLAGE GREEN 483, TYPE III, ROLL #3485 FOR SHADE, APPEARANCE AND

COLORFASTNESS.

CAMOUFLAGE GREEN 483, TYPE IV, ROLL #3486, FOR SHADE, APPEARANCE AND

COLORFASTNESS.

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729 (THE

FOLIAGE GREEN 502 AREA OF THE PATTERN).

STANDARD SAMPLE FOR DESERT SAND 503 IS MIL-C-44436, ROLL #3729 (THE

DESERT SAND 500 AREA OF THE PATTERN).

FOLIAGE GREEN 504/DESERT SAND 503 IS TO BE USED AS SPECIFIED BY

CONTRACT. THIS APPLIES TO TYPE III.

ADDITIONAL INFORMATION FOR ASTM-D-6193(2004)OR LATEST VERSION:

NO ADDITIONAL INFORMATION FOLLOWS.

DIVINE LITURGY – 9925-01-450-6880

BOOK: DIVINE LITURGY; THE ORDER OF THE DIVINE LITURGY ACCORDING TO ST. JOHN CHRYSOSTOM WITH APPENDICES. BASED ON 1976 ENGLISH TRANSLATION, APPROVED FOR LITURGICAL USE BY THE GREAT COUNCIL OF BISHOPS; CONTAINS VESTING PRAYERS, LITURGY OF PREPARATION, DIVINE LITURGY OF ST. JOHN CHRYSOSTOM, PRAYERS FOR THE LITURGY OF ST. BASIL THE GREAT, SUNDAY HYMNS FROM THE OCHTOECHOS, DISMISSALS, PASCHAL CYCLE, FESTAL CYCLE, SELECTIONS FROM

THE MENAION, AND THE VESTING PRAYERS FOR A HIERARCH; PUBLISHED BY ST. TIKHON'S

SEMINARY PRESS; THIRD EDITION EXPANDED AND CORRECTED; 30 WEIGHT BIBLE PAPER;HARDCOVER;

236 PAGES; BLACK WITH GOLD IMPRINTS; DIMENSIONS (IN INCHES): 6.25 X 4.25 (NOMINAL)

ISBN 9781878997791

FONT, HOLY WATER, BRONZE - 9925-01-459-3726

FONT, HOLY WATER, BRONZE; MADE OF BRONZE;

HIGH POLISH; OVEN BAKED FOR DURABILITY; EQUIPPED

WITH BRONZE BASINS AND PLASTIC LINERS; 5-1/2"

DIAMETER BOWL; BACKPLATE 7-1/2" X 16";

EXCELSIS NO. 242-83C, OR EQUAL

(Ref. 22103)