9776_EDR.pdf
PDF 14 KB Posted
- Attached to
- F-16 SST Cable Assembly Federal contract opportunity
- Solicitation number
- FA8212-21-R-0241
About this file
This document contains engineering data requirements and specifications for an F-16 cable assembly procurement. The engineering data requirements provide instructions for the manufacture of a special purpose electrical cable assembly with part number 8389747P002 and national stock number 6150-01-555-9776. The specifications require Item Unique Identification marking on the deliverables in accordance with various military standards, including a human readable label with cage code, part number, and serial number of at least 1/8 inch lettering and a 2D matrix machine readable label with the same information in a 1/4 inch square. Deviations from drawings or specifications require prior approval from 416th Supply Chain Management Squadron engineering. The related federal contract opportunity is a solicitation from the Department of the Air Force Materiel Command Air Force Sustainment Center to procure F-16 cable assemblies. The solicitation is restricted to qualified sources, with a source qualification package attached for potential offerors to become qualified.
View the file
Other files for this federal contract opportunity
Show all 50
F-16 SST Cable Assembly has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1.THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL
2. PART NUMBER:
8389747P002
3. NATIONAL STOCK NUMBER:
6150-01-555-9776
PREPARED BY:
Tim Lucas
OFFICE SYMBOL:
416 SCMS / GUEAA
DATE:
31 May 2018
HILL AFB FORM 462 Page 1 of 1
4. Deviations from specifications identified in drawings or this document are not authorized without prior approval by 416 SCMS/GUEAA Engineering.
5. IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equipped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
6. Part Marking as per MIL-STD-130 in lieu of FPS-3008.
File details come from the government source that posted it. Updated .