4535_EDR.pdf
PDF 14 KB Posted
- Attached to
- F-16 SST Cable Assembly Federal contract opportunity
- Solicitation number
- FA8212-21-R-0241
About this file
This document contains an engineering data requirements attachment and related federal contract opportunity solicitation. The engineering data requirements attachment provides instructions for the manufacture of a special purpose electrical branched cable assembly and specifies that item unique identification marking is required in accordance with various military standards. The related federal contract opportunity is a solicitation to procure F-16 cable assemblies for the Department of the Air Force Materiel Command Air Force Sustainment Center. The solicitation is restricted to qualified sources, with source qualification packages attached for contractors not already approved, and awards will only be made to qualified offerors. The government reserves the right to not delay contract awards to allow potential offerors to demonstrate qualification.
View the file
Other files for this federal contract opportunity
Show all 50
F-16 SST Cable Assembly has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1.THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED
2. PART NUMBER:
16U75A67-1
3. NATIONAL STOCK NUMBER:
6150-01-614-4535
PREPARED BY:
Tim Lucas
OFFICE SYMBOL:
416 SCMS / GUEAA
DATE:
30 Sep 2019
HILL AFB FORM 462 Page 1 of 1
4. Deviations from specifications identified in drawings or this document are not authorized without prior approval by 416 SCMS/GUEAA Engineering.
5. IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equipped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
File details come from the government source that posted it. Updated .