SATPC0036638 Tab 04 4 SOW.pdf
PDF 17 KB Posted
- Attached to
- Honey Comb Panels
- Solicitation number
- 80NSSC24883090Q
About this file
This document is a Statement of Work (SOW) for composite type panels to be used in the fabrication of a test cell. The key requirements are that the panel skins must be magnetic, the honeycomb core thickness must be either 1/2 inch or better on 1 inch thick panels, or 1 inch or better on 2 inch thick panels, and the outer edges must be sealed. The panels are to be delivered to the NASA Langley Research Center, Building 1299F, Room 102A, within 5-7 weeks of the order. The related federal contract opportunity is Solicitation Number 80NSSC24883090Q, for "Honey Comb Panels", issued by the National Aeronautics and Space Administration Shared Services Center, a civilian agency.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0036638 Tab 04 Step Files.pdf | ||
| SATPC0036638 Tab 10 RFQ Open Market.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK Range Panels
1. Objective/Requirements
The contractor shall provide composite type panels for the use in the fabrication of a test cell.
2. Characteristics, Scope, and Specs
The panels should meet the following requirements.
▪ The skins of the panels must be magnetic.
▪ Honeycomb core should consist of ¼ inch honeycomb on the ¾ inch thick panels or better.
▪ Honeycomb core should consist of ½ inch honeycomb on the ½ inch thick panels or better.
▪ The outer edges must be sealed.
▪ The holes within the panels are not required to be sealed, but it is acceptable to seal.
• See Step files for definition of sizes and hole locations.
3. Place of Performance
Delivered to LARC, building 1299F, room 102A.
4. Period of Performance
Delivery of Panels 5 to 7 weeks from receipt of order
File details come from the government source that posted it. Updated .