RFQ_7QSBAAC-W2-16-3639-SQ-2.docx

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS-SMALL PURCHASE SET-ASIDE (52.219-6)

PAGE OF PAGES

1 | 40

UNDER BDSA REG. 2

RATING

GSA, FAS, Southwest Supply Acquisition Center Acquisition Division (7QSBAAC-W2) 819 Taylor Street, Room 7A37 Fort Worth, TX 76102

If Orders are issued, delivery is required within 10 DAYS ARO OR SOONER

(See Schedule)

NUMBER

850-8364

1. DESTINATION

To be shown on each order issued against this Standing Quote Agreement.

a. NAME

b. COMPANY

b. STREET ADDRESS

c. STREET ADDRESS

c. CITY

d. CITY

e. STATE

f. ZIP

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5A ON OR

BEFORE CLOSE OF BUSINESS (Date)

December 23, 2015 IMPORTANT: This is a request for information, and quotations furnished are not quotes. If you are unable to quote, please so indicate on this form and return it to the address in Block 5A. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

A. This is a Request for Quote (RFQ) for a Standing Quote Agreement (SQ). The award will be for a two-year period from DATE OF AWARD. The total dollar value of all orders issued will not exceed $149,999 over the life of this agreement. The estimated quantities for this SQ are indicated on page 6 of this RFQ. However, since demand can fluctuate significantly up or down due to market conditions, this agreement will be awarded as not to exceed $149,999 over the period of performance mentioned above. The SQ will be awarded as NTE $149,999 or two years, whichever comes first. The Standing Quote Agreement will be reviewed on an annual basis. Federal Acquisition Service, Southwest Supply Acquisition Center (SSAC) may issue orders against this SQ for items awarded. This is not a contract. A binding agreement only arises if the SSAC issues an order and the order is accepted by the SQ-holder. Estimates contained herein are provided for informational purposes only. There is no guarantee that any orders or any specific amount of orders will be issued. This SQ may be cancelled at any time by either party with written notice. This is only a request for pricing. Any delivery orders issued will be pursuant to the evaluation of the quotations received. DO NOT SHIP.

B. The Government will award a Standing Quote Agreement to the quoter determined as the lowest price technically acceptable quote.

Evaluation Factors: Lowest priced, technically acceptable item – See Evaluation Factors on page 40.

12. DISCOUNT FOR PROMPT PAYMENT

NOTE: Additional provisions and representations are are not attached.

c. COUNTY

AREA CODE

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 Re. 6-95)

Block 11 continued.

C. In accordance with M-FSS-301-D, Award will be made in the aggregate for all items.

D. Delivery terms for any orders issued will be FOB Destination.

E. The Item Purchase Descriptions and Schedule of Items are shown on pages 4 thru 6.

F. Clauses applicable to all orders issued under this SQ are shown on pages 7 thru 34.

G. When responding to this Request for Quotation, complete and return the entire package. If you “No Quote” please indicate and return page 1 only. Only quotes with prices on all items will be considered for award.

H. The North American Industry Classification System (NAICS) code for this acquisition is *339999*.

I. FAR 52.212-1, Instructions to Offerors – Commercial Items (OCT 2015) is incorporated by reference. Found on Page 12. Clause is tailored in paragraph (b), replace the entries showing “SF 1449” references with “SF 18,” and paragraph (h) “Multiple awards.” is replaced with a “Single award agreement.” to be issued as a result of this RFQ.

J. FAR 52.212-4, Contract Terms and Conditions – Commercial Items (MAY 2015). Found on page 15. Replace the entries showing “SF 1449” references with “SF 18”.

K. FAR 52.225-4, BUY AMERICAN-FREE TRADE AGREEMENTS-ISRAELI TRADE ACT CERTIFICATE (MAY 2014) – applies to this RFQ and is incorporated by reference. Reference found on page 38.

L. WHEN RESPONDING TO THIS RFQ, YOU MAY SUBMIT THE ENTIRE DOCUMENT VIA EMAIL TO JOSHUA.WALKER@GSA.GOV. THE FULL DOCUMENT AND ALL SUPPORTING DOCUMENTATION MUST BE RECEIVED BY THE CLOSING DATE AND TIME FOR YOUR RESPONSE TO BE CONSIDERED FOR AWARD.

M. Quoters are responsible for submitting quotes, so as to reach the Government office designated in the RFQ by the time specified (See Block 10). It is preferred that each quote package be submitted as an attachment to the RFQ response via email. If quote is received later than the exact time specified in block 10 of the RFQ, it will be considered “late” and will not be accepted.

N. This is notice that the Government intends to evaluate quotes and award will be made on initial quotes, and advises quoters to submit their best terms and prices in their initial quotation.

O. The agreement awarded may be cancelled by either party at any time with written notice.

P. The following is how you can obtain specifications:

FED Specs — GSA Federal Supply Service Specifications Section, Ste. 8100, 470 E. L’Enfant Plaza, SW, Washington, DC 20407 [Telephone 202-619-8925, FAX 202-619-8978] http://assist.daps.dla.mil/online/start/ Click on “Quick Search” (left side of screen). Type the document in the "Document ID" field and hit submit. You do not need a password.

MIL Specs — Department of Defense Single Stock Point (DoDSSP), Bldg. 4,Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094 [Telephone 215-697-2667/2179, FAX 215-697-1462] Web Site www.dsp.dla.mil Click on “Online Specs” or http://assist.daps.dla.mil/online/start/ Click on “Quick Search” (left side of screen). Type the document in the "Document ID" field and hit submit. You do not need a password.

ANSI Standards — American National Standards Institute, Inc., 11 West 42nd Street, 13th Floor, New York, NY 10036 [Telephone 212-642-4900]

ASTM — American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 [Telephone 610-832-9585, FAX 610-832-9555] Web Site: www.astm.org, email: service@astm.org. (ASTM does charge for their services)

Recycled Material — Two sites for information related to the Comprehensive Procurement Guidelines and Recovered Materials Advisory Notices: www.epa.gov/cpg

Commercial Item Descriptions - http://assist.daps.dla.mil/online/start/ Click on “Quick Search” (left side of screen). You do not need a password.

Q. The awardee will be required to ship to APO/FPO addresses, and to ships, when they receive orders that indicate these types of ship-to addresses. Do not submit a quote if you are not willing to ship to these locations.

R. If supplies shipped are not packaged, packed, and marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor, to perform the required repackaging/repacking/ remarking, by contract or otherwise, and charge the Contractor therefore at the following rates:

First Hour - $150.00 Each Additional Hour - $70.00 A minimum of 2 hours is required for each incident, making the minimum charge for remarking $220.00

The Contractor may also be charged for material costs, if incurred. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract. The rates above shall be determined and may be periodically updated by the Commissioner, Federal Acquisition Service, or a designee.

S. Inspection is at Destination for each individual order which may be anywhere in the Continental United States (CONUS).

The Government will not make assumptions concerning the quoter’s intent. Clear identification is the sole responsibility of the quoter.

ALL COMPLETED PAGES (1-40) MUST BE RETURNED WITH YOUR QUOTE (NO EXCEPTION). FAILURE TO PROVIDE THE REQUIRED INFORMATION MAY RESULT IN YOUR QUOTE NO LONGER BEING EVALUATED / CONSIDERED FOR POSSIBLE AWARD.

Request for Quotation # 7QSBAAC-W2-16-3639-SQ-2 Dated 12/14/2015

A. Taxpayer Identification Number (TIN): _____________________ B. Data Universal Numbering System (DUNS): ______________________ C. Point of Contact: ______________________

Phone Number: _______________________

Fax: __________________________

E-Mail Address: _______________________

Are you a large or small business? __________________

Are you a manufacturer or dealer? __________________

D. Supplier Name*: ___________________________

Point of Contact*: __________________________

Supplier DUNS*: ___________________________

Supplier TIN*: _____________________________

Is your supplier large or small? _________________

(Please complete the Supplier’s name, TIN and DUNS number for each NSN if different)(Note: “Supplier” refers to the company providing you the product, if you are not the manufacturer).

ITEM PURCHASE DESCRIPTION(S)

Item 1:

NSN: 9905-00-202-3639

DATE: 8/03/15

REFLECTOR, INDICATING, CLEARANCE: Shall be Grote Industries Inc. P/N 40163, or equal, with the following characteristics. Shall be in accordance with Commercial Item Description A-A-52428A dated April 21, 1997, with the following characteristics:

Unit of issue - PG (package of ten (10) each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov web site. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulation DLAD 47.305.1

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

Item 2:

NSN: 9905-00-205-2795

DATE: 8/03/15

REFLECTOR, INDICATING, CLEARANCE: Shall be Grote Industries Inc. P/N 40162, or equal, with the following characteristics. Shall be in accordance with Commercial Item Description A-A-52428A dated April 21, 1997, with the following characteristics:

Unit of issue - PG (package of ten (10) each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov web site. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulation DLAD 47.305.1

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

End of Item Purchase Description

I ______________________________ certify that the item(s) to be furnished will be in accordance with all applicable requirements, and the item is of the quality specified and conform in all respects with the agreement, including packaging, packing, marking requirements, and physical item identification.

SCHEDULE OF ITEMS

Use the Schedule of Items below to submit you quoted prices.

NOTE: THIS IS ONLY A REQUEST FOR PRICING. ANY ORDERS ISSUED WILL BE PURSUANT TO THE EVALUATION OF THE QUOTATIONS RECEIVED. PRICING FOR THE ITEM SHALL BE COMPLETED BELOW:

C. Unit of Issue: Item No. 1 – PG, Item No. 2 - PG D. Country of Origin (where the item is being manufactured):____________________________________

Item No.

NSN(s)/Description

Destination

Est’d Orders 2-Year Est’d 2-Year Qty

(Est’d 2-Year Qty x Unit Price)

1.

9905-00-202-3639

FOB Destination

PG

2.

9905-00-205-2795

FOB Destination

1,900

2,910

PG

Total Price for both NSNs

Enter company part number and the weight and cube for each item.

1.

NSN 9905-00-202-3639

Part No. ______________________

Weight _____

Cube _____

2.

NSN 9905-00-205-2795

Part No. ______________________

Weight _____

Cube _____

END OF SCHEDULE OF ITEMS

The following clauses will be applicable to any orders issued under this standing quote agreement:

Packaging and Marking

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

552.211-75 PRESERVATION, PACKAGING, AND PACKING (FEB 1996) (ALTERNATE I- MAY 2003) Unless otherwise specified, all items shall be preserved, packaged, and packed in accordance with normal commercial practices, as defined in the applicable commodity specification. Packaging and packing shall comply with the requirements of the Uniform Freight Classification and the National Motor Freight Classification (issue in effect at time of shipment) and each shipping container of each item in a shipment shall be of uniform size and content, except for residual quantities. Where special or unusual packing is specified in an order, but not specifically provided for by the contract, such packing details must be the subject of an agreement independently arrived at between the ordering activity and the Contractor.

552.211-76 CHARGES FOR PACKAGING, PACKING AND MARKING (JAN 2010)

If supplies shipped are not packaged, packed and marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor, to perform the required repackaging/repacking/ remarking, by contract or otherwise, and charge the Contractor therefore at the rate of $150 for the first hour and $70 for each subsequent hour ($220, or 2 hour, minimum) per man-hour or fraction thereof. The Contractor will also be charged for material costs, if incurred. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract.

552.211-77 PACKING LIST (FEB 1996)

(a) A packing list or other suitable shipping document shall accompany each shipment and shall indicate:

(1) Name and address of the consignor;

(2) Name and complete address of the consignee;

(3) Government order or requisition number;

(4) Government bill of lading number covering the shipment (if any); and

(5) Description of the material shipped, including item number, quantity, number of containers, and package number (if any).

(b) When payment will be made by Government commercial credit card, in addition to the information in (a) above, the packing list or shipping document shall include:

(1) Cardholder name and telephone number and

(2) The term “Credit Card.”

552.211-86 MAXIMUM WEIGHT PER SHIPPING CONTAINER (JAN 2010)

In no instance shall the weight of a shipping container and its contents exceed 23 kilograms (51 pounds), except when caused by –

Inspection and Acceptance

ITEM

NO(S).

NAME OF

MANUFACTURER

PRODUCTION POINT

NAME, ADDRESS

(Including County), and

TELEPHONE NUMBER

INSPECTION POINT

(If other than Production Point)

NOTE: If additional space is needed, the quoter may furnish the requested information by an attachment to the quote. If the quoter is not the manufacturer for this item please provide the DUNS number for your supplier. DUNS #_________________________________________ Deliveries or Performance

(1) Free of expense to the Government, on board the carrier's conveyance, at a specified delivery point where the consignee's facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

(2) Supplies shall be delivered to the destination consignee's wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the Contractor uses rail carrier or freight forwarder for less than carload shipments, the Contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.

(b) The Contractor shall--

(1) (i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(b) Time of Delivery. Notwithstanding the required time for delivery to destination as may be specified elsewhere in this contract, if shipments under this clause are mailed not later than five (5) calendar days before the required delivery date, delivery shall be deemed to have been made timely.

F-FSS-200-A DELIVERY—F.O.B. DESTINATION (JUN 1995)

Prices quoted must cover delivery f.o.b. destination (FAR 52.247-34) to the GSA distribution centers and/or military depots as specified in the item listing. The facility addresses, telephone numbers to be used for scheduling, and times between which unscheduled small loads may be received at General Services Administration Distribution centers (depots) are listed in Clause FFSS300.

Contract Administration Data

Office of the Chief Information Officer (QI), 2100 Crystal Drive, Arlington, VA 22202 Telephone: (703) 605-9444

If “yes” is checked, ordering information to be inserted above shall reflect that in addition to quoter’s name, address, and facsimile transmission telephone number, orders can be addressed to the quoter’s name, c/o nearest local dealer. In this event, two copies of a list of participating dealers shall accompany this quote, and shall also be included in Contractor’s Federal Supply Schedule pricelist.

G-FSS-900-A CONTACT FOR CONTRACT ADMINISTRATION (JAN 1994)

Quoters are required to designate a person to be contacted for prompt contract administration.

NAME

TITLE

ADDRESS

(b) All quoters are cautioned that if the payment address shown on an invoice differs from that shown above, the address above will govern. Payment to any other address, except as provided for through EFT payment methods, will require an administrative change to the contract.

Contract Clauses

52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS (OCT 2015)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show-

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) “Remit to” address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during pre-award testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers.

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation.

(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Data Universal Numbering System (DUNS) Number. (Applies to all offers exceeding $3,500, and offers of $3,500 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the offeror’s name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office.

(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS (MAY 2015) 12.301(b)(3)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include-

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, contract line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.-

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR Part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall-

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the-

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected contract line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109 , which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if-

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates: