75F40124Q121146.pdf

75F40124Q121146

This is a combined synopsis/solicitation for commercial items prepared in accordance with the Federal Acquisition Regulation (FAR) format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement is being issued in conjunction with FAR Part 13.5 Simplified Acquisition Procedures for Certain Commercial Products and Commercial Services. The solicitation number is 75F40124Q121146. This solicitation is issued as a Request for Quote (RFQ).

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-03 dated February 23, 2024.

The associated North American Industry Classification System (NAICS) Code is 334516- Analytical Laboratory Instrument Manufacturing; with a Small Business Size standards in number of 1,000 employees. This RFQ is issued for Full and Open Competition.

Schedule of Supplies or Services and Prices/Costs. Price shall be inclusive of delivery to the location listed herein.

Line item

Description Quantity Units Unit Price Extended Price

50L Pilot Freeze Dryer, meeting the minimum technical requirements set forth below.

1 EA $_________ $___________

Option Items (FAR 52.217-9).

Option Year 1: Post-warranty Preventive Maintenance and Repair service agreement for a 50L Pilot Freeze Dryer.

12 Months $_________ $___________

Option Year 2: Post-warranty Preventive Maintenance and Repair service agreement for a 50L Pilot Freeze Dryer.

12 Months $_________ $___________

Option Year 3: Post-warranty Preventive Maintenance and Repair service agreement for a 50L Pilot Freeze Dryer.

12 Months $_________ $___________

Option Year 4: Post-warranty Preventive Maintenance and Repair service agreement for a 50L Pilot Freeze Dryer.

12 Months $_________ $___________

Grand Total Items 1 through 5 $_______________

Background The U.S. Food and Drug Administration (FDA), Center for Biologics Evaluation and Research (CBER)’s Division of Biological Standards and Quality Control (DBSQC) requires a 50L Pilot Freeze Dryer to replace an SP Industries, Vertis 35XL (35L) Lyophilizer, which is ~15 years old and has been discontinued by the manufacturer, so is being offered as a trade-in on the new instrument. This requirement also includes four (4) option years of post-warranty maintenance.

The Division of Biological Standards and Quality Control (DBSQC) is responsible for preparing Center for Biologics Evaluation and Research (CBER) Biological Reference Standards and Reagents. These standards and reagents are used to quantify the potency of biological drugs used by manufacturers during product production and used by international regulatory agencies -and the FDA - for lot-release testing before these biological drugs are approved for release to the public. DBSQC produces a variety of CBER Standards and Reagents and distributes them in various sized glass-labeled vials in accordance with the Code of Federal Regulations 610.60 – 65 and 812.5.

Minimum Technical Requirements:

1. Existing clean room space configuration not to exceed dimensions:

a. Width 64cm

b. Depth 198cm

c. Height 192cm

2. Freeze Dryer specifications:

a. Condenser maximum low temperature: -85°C

b. Lowest shelf temperature: ≤ -67°C / -70°C

c. Shelf temperature range: -70C to +65C

d. Shelf temperature control range: -55°C to +65°C

e. Shelf pull-down from 20°C to -40°C: ≤ 40 minutes

f. Condenser pull-down from 20°C to -45°C: 35 minutes

g. Shelf temperature uniformity: +/- 1°C

h. Condenser capacity: 20 liters/24 hours, 50 liters maximum capacity

i. Condenser surface area: 10 ft2 (.93 m2)

j. Maximum Deposition rate: ≥ 0.83 L/hour

k. Number of compressors: 2

l. Compressor: #1: 3.5 hp; #2: 1.5 hp

m. Stoppering: Bottom-up hydraulic

n. Defrost: Hot gas

o. Refrigerant type: Non-CFC

p. Vacuum time to 100 mTorr: ≤ 45 minutes

q. Vacuum rate of rise: ≤ 30 mT/hour

r. Volume-based leak rate: ≤ .0042 mbarL/sec

s. Lowest system vacuum: ≤ 15 mT

t. Power requirement: 208/230V @ 60Hz

3. Shall contain ten (10) 316L stainless steel shelves.

4. Contractor shall provide all clean room installation accessories necessary for a complete turn-key installation.

5. Freeze dryer shall accommodate two mL, three mL and five mL vials that use 13 and 20 mm wide lyophilization stoppers.

6. Stoppering shelf configuration for freeze dryer:

a. Shall have adjustable shelves.

b. Shall provide for stoppering of vials under vacuum.

c. Shall be able to backfill with inert gas to validated 3 mL and 5 mL vials capped with

13 mm and 20 mm lyophilization stoppers, respectively.

7. Shall include a vacuum pump capable of operating at 343 - 378 LPM @ 60Hz

8. Shall provide a range of 1-3% low residual moisture content formulation for packaging of lyophilized products.

9. Shall have functional properties, such as self-sealing and resistance to coring, and stability of lyophilization closures during freeze-drying process.

10. All components shall be compatible with steam sterilization.

11. Shall have a fully automated control system meeting the following:

a. Freeze drying phases:

1. At least twelve (12) thermal treatment (pre freeze) steps each with rate/hold capability

2. Product freeze (Programmable freeze dry control system)

3. At least seventeen (17) drying steps each with rate/hold capability

4. Storage (hold) phase until cycle end

5. Automatic backfill capability with air or inert gas

6. Automatic stoppering via controls on stoppering units

b. Shall include an automated function and leak rate testing.

c. Shall incorporate conditional and emergency alarms to protect product and equipment.

d. Controls instrumentation shall meet the following:

7. At least eight (8) type T product thermocouples

8. At least one (1) condenser temperature probe

9. At least one (1) shelf temperature probe

10. Convection vacuum transducer

11. Capacitance Manometer

- PVG/CM differential process control software to automatically advance to the next drying step based on Manometer pressure comparison.

- Automated batch reports include: the cycle recipe, an event log, tabulated numeric data in 10-minute increments, and a historical graph.

e. Two (2) UPS shall be included – one each for PC and PLC – to protect the data collection function in case of temporary power loss.

f. Windows 10 computer workstation with printer

1. Historical trending, with user customized trends

- Ability to export data to a spreadsheet batch report with capability to print and save to a PDF.

12. Shall include Barometric End Point Process Control Software

a. Pressure Rise Test for product dryness.

b. Automatically closes/opens isolation valve.

c. Measures vapor pressure rise in product chamber.

13. Contractor shall provide installation.

14. Contractor shall provide Onsite Qualification (IQ/OQ)

a. Shall provide equipment qualification protocol for FDA review and address any comments / suggestions.

b. Shall execute equipment qualification based on FDA-approved protocol.

c. Shall prepare qualification report with data and any deviations.

d. Shall provide qualification report for FDA review.

e. Qualification shall be performed within 60 days after the delivery and installation of the instrument.

Installation, Training and Additional System Requirements

1. The components and equipment shall be newly manufactured, not used or refurbished, or previously used for demonstration.

2. Offered systems shall be a turn-key solution i.e., the contractor shall be responsible for providing all hardware, components, instruments, computers, software, and that otherwise required to meet these specifications and the FDA’s stated need.

3. The systems shall be delivered with all necessary supplies and accessories required for installation and start-up.

4. The system and associated accessories shall include operations and maintenance manuals covering proper operation, routine maintenance, and troubleshooting for the system and controlling software. All manuals and documentation shall be provided in hard copy and/or electronic format.

5. The Contractor shall provide all labor, travel, and tools to install the equipment at the address provided below, to include shipping. The contractor shall demonstrate upon installation that the item meets or exceeds all performance specifications. Upon acceptance of the system, the contractor shall provide on-site operator training/familiarization. Such familiarization shall include system operations, calibration, optimization, troubleshooting and basic operational maintenance procedures.

6. Systems shall be warranted for not less than one (1) year from FDA acceptance of the system(s) to include on-site training. Warranty service shall include troubleshooting capabilities based on complete knowledge of the entire system, immediate access to replacement parts, and immediate access to system improvements and updates. Phone and email technical support shall be included for a minimum of one (1) year.

7. The Government is offering the following trade-in equipment which is offered in “as is” condition. Contractor shall assume all costs for packaging and shipping trade-in equipment.

Supervision and technical assistance (either virtually or in-person) shall be provided for removal of existing system. The trade-in equipment shall be picked up from the building 52/72 Loading Dock at the FDA campus.

- SP Industries Vertis 35XL (35L) Lyophilizer, serial # 219568

Post-Warranty Preventive Maintenance and Repair Services Minimum Performance Requirements:

1. The Contractor shall provide one (1) scheduled on-site planned preventive maintenance and

National Institute of Standards and Technology (NIST) calibration visit per year.

2. The Contractor shall provide unlimited On-Site Corrective Maintenance/Repairs within 3 business days of call for service where problems cannot be resolved remotely after 2 business days.

3. The Maintenance and Repair activities shall be performed by service engineers who are trained and certified by the Original Equipment Manufacturer (OEM). The service provider should follow the OEM specifications, manuals, and service bulletins, using OEM-certified replacement parts, components, subassemblies, etc.

4. The Contractor shall include software and firmware updates required during on-site instrument repair and instrument’s performance check during preventive maintenance during the coverage period(s).

5. The Contractor shall provide factory-certified replacement parts.

6. The Contractor shall include unlimited technical support (via phone and email) on software and hardware and troubleshooting with any equipment issues, Monday through Friday (excluding Federal Holidays) 8:00AM – 5:00PM Eastern Time.

7. All maintenance/repair pricing shall be inclusive of labor, travel, replacement parts, components, subassemblies, etc. for the system.

Deliverables: Service Records and Reports: the Contractor shall, commensurate with the completion of each service call (inclusive of warranty service), provide the end-user of the equipment with a copy of a field service report/ticket identifying the equipment name, manufacturer, model number, and serial number of the equipment being serviced/repaired and detailing the reason for the service call, a detailed description of the work performed, the test instruments or other equipment used to affect the repair or otherwise perform the service, the name(s) and contact information of the technician who performed the repair/service, and for information purposes, the on-site hours expended, and parts/components replaced. In addition, the Contractor shall provide a written report to the FDA COR and Contract Specialist, summarizing all maintenance and repair activities (including warranty work) each time service and/or repair is performed.

Place of Performance:

FOB Point Destination. All items shall include shipping, handling and inside delivery and installation to the destination identified herein.

FDA/CBER

Building 52/72, Room 5296 10903 New Hampshire Avenue Silver Spring, MD 20993 POC: will be provided at the time of award

Period of Performance:

Delivery, Installation and Training shall occur within 90 calendar days from date of award.

4 - (1-year Post-Warranty Maintenance and Repair Option periods):

Option Year 1: 12 consecutive months commencing upon expiration of initial warranty;

Option Year 2: 12 consecutive months commencing upon expiration of Option Year 1;

Option Year 3: 12 consecutive months commencing upon expiration of Option Year 2;

Option Year 4: 12 consecutive months commencing upon expiration of Option Year 3;

Warranty shall commence upon acceptance of the 50L Pilot Freeze Dryer. Post-warranty Preventative maintenance and repair service, if exercised, shall commence, upon expiration of the warranty period and continue for a year, which may be extended in annual increments.

If/when Option Period 1 is exercised; the periods of performance for all options will be firmed via bilateral modification.

The period of performance for the option periods in any resultant award will be estimated based on the date of award, required delivery of the system (inclusive of inside delivery, installation, and training), and the offered warranty period.

Delivery, Installation, Training and Services shall not be scheduled during Federal Holidays or Federal Closures as determined by Executive Orders or WWW.OPM.GOV. Federal Holidays are as follows:

New Year’s Day Labor Day Martin Luther King, Jr.’s Birthday Columbus Day Washington’s Birthday Veterans Day Memorial Day Thanksgiving Day Juneteenth Christmas Day Independence Day

Contract Type: Commercial Product and Commercial Service - Firm fixed price

Contract clauses

52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far and https://www.hhs.gov/grants/contracts/contract-policies-regulations/hhsar/index.html

The clause at 52.212-4, Contract Terms and Conditions-Commercial Items (Nov 2023), applies to this acquisition. The following addenda apply:

FAR Clauses 52.204-13 System for Award Management and Maintenance (Oct 2018) 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) 52.217-9 Option to Extend the Term of the Contract (Mar 2000) https://www.acquisition.gov/browse/index/far https://www.hhs.gov/grants/contracts/contract-policies-regulations/hhsar/index.html

(a) The Government may extend the term of this contract by written notice to the Contractor any time before the contract expires; provided that the Government gives the Contractor a preliminary written notice of its intent to extend any time before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years.

HHSAR Clauses 352.222-70 Contractor Cooperation in Equal Employment Opportunity Investigations (Dec 2015) 352.232-71 Electronic Submission of Payment Requests (Feb 2022)

(a) Definitions. As used in this clause- Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), “Content of Invoices” and the applicable Payment clause included in this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site.

(c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with HHS procedures.

(d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request.

(END OF CLAUSE)

352.239-79 Information and Communication Technology Accessibility (Feb 2024)

(DEVIATION)

(a) Pursuant to Section 508 of the Rehabilitation Act of 1973 (29 U.S.C. 794d), as amended by the Workforce Investment Act of 1998, all information and communication technology (ICT) supplies, products, platforms, information, documentation, and services support developed, acquired, maintained or delivered under this contract or order must comply with the Revised 508 Standards, which are located at 36 C.F.R. 1194.1 and Appendices A, B, and C, and are available at https://www.access-board.gov/ict/. Information about Section 508 is available at https://www.hhs.gov/web/section-508/index.html.

(b) Additional Section 508 accessibility standards applicable to this contract or order may be identified in the specification, statement of work, or performance work statement. If it is determined by the Government that ICT supplies, products, platforms, information, documentation, and services support provided by the Contractor do not conform to the described accessibility standards in the contract, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its own expense.

(c) In the event of a modification(s) to this contract or order, which adds new ICT supplies or services or revises the type of, or specifications for, supplies, products, platforms, information, https://www.access-board.gov/ict/ https://www.hhs.gov/web/section-508/index.html documentation, or services support, the Contracting Officer shall require that the Contractor submit a completed HHS Section 508 Accessibility Conformance Checklist (see https://www.hhs.gov/web/section-508/accessibility-checklists/index.html) or an Accessibility Conformance Report (ACR) (based on the Voluntary Product Accessibility Template (VPAT) see https://www.itic.org/policy/accessibility/vpat), and any other additional information necessary to assist the Government in determining that the ICT supplies or services conform to Section 508 accessibility standards. If it is determined by the Government that ICT supplies, products, platforms, information, documentation, and services support provided by the Contractor do not conform to the described accessibility standards in the contract, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its own expense.

(d) If this is an Indefinite-Delivery type contract, a Blanket Purchase Agreement or a Basic Ordering Agreement, the task/delivery order requests that include ICT supplies, products, platforms, information, documentation, or services support will define the specifications and accessibility standards for the order. In those cases, the Contractor shall be required to provide a completed HHS Section 508 Accessibility Conformance Checklist (see https://www.hhs.gov/web/section-508/accessibility-checklists/index.html) or an ACR (based on the VPAT see https://www.itic.org/policy/accessibility/vpat), and any other additional information necessary to assist the Government in determining that the ICT supplies, products, platforms, information, documentation, or services support conform to Section 508 accessibility standards. If it is determined by the Government that ICT supplies and services provided by the Contractor do not conform to the described accessibility standards in the provided documentation, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its own expense.

(e) The contractor shall identify to the Contracting Officer any perceived exception or exemption to Section 508 requirements.

(End of clause)

Inspection/Acceptance:

The supplies and/or services delivered hereunder shall be inspected and accepted at destination by the Contracting Officer Representative (COR) specified at award. If the supplies or services are acceptable, the COR shall promptly forward a report of inspection and acceptance to the paying office. If the supplies or services are not acceptable, the COR shall document the nonconforming items/services and immediately notify the contracting officer.

Contract Administration

a. The Contracting Officer is the only person with authority to act as agent of the Government under this contract. Only the Contracting Officer has authority to:

(1) Direct or negotiate any changes in the statement of work;

(2) Modify or extend the period of performance;

(3) change the delivery schedule;

https://www.hhs.gov/web/section-508/accessibility-checklists/index.html https://www.itic.org/policy/accessibility/vpat https://www.hhs.gov/web/section-508/accessibility-checklists/index.html https://www.itic.org/policy/accessibility/vpat

(4) Authorize reimbursement to the Contractor any costs incurred during the performance of this contract; or

(5) Otherwise change any terms and conditions of this contract.

The contact information for the Contracting Officer is:

Name: Suzanne Martella Phone: 870-543-7540 Email: suzanne.martella@fda.hhs.gov

The contact information for the Contract Specialist is:

Name: Warren Dutter Phone: (870) 543-7577 Email: warren.dutter@fda.hhs.gov

b. The Contracting Officer Representative (COR) is responsible for:

(1) Monitoring the Contractor's technical progress, including the surveillance and assessment of performance and recommending to the Contracting Officer changes in requirements;

(2) Interpreting the statement of work and any other technical performance requirements;

(3) Performing technical evaluation as required;

(4) Performing technical inspections and acceptances required by this contract; and

(5) Assisting in the resolution of technical problems encountered during performance.

The following COR will represent the Government for the purpose of this contact (To be completed at time of award):

Name:

Phone:

Email:

Payment Terms: Net 30 days after government acceptance of proper invoice. No advance payments will be made. For the post-warranty maintenance service, Contractor may submit invoices monthly, quarterly or annually, in arrears.

Invoice Submission: FDA Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (Jan 2022)

a. All Invoice submissions for goods and or services must be made electronically through the U.S. Department of Treasury's Invoice Processing Platform System (IPP). http://www.ipp.gov/vendors/index.htm

b. Invoice Submission for Payment means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in FAR 32.905(b), "Content of Invoices" and the applicable Payment clause included in this contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial items contracts. The IPP website address is: https://www.ipp.gov c.

mailto:suzanne.martella@fda.hhs.gov

1. The Agency will enroll the Contractors new to IPP. The Contractor must follow the IPP registration email instructions for enrollment to register the Collector Account for submitting invoice requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive Registration email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award for new contracts or date of modification for existing contracts.

2. Registration emails are sent via email from ipp.noreply@mail.eroc.twai.gov. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email to IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

3. The Contractor POC will receive two emails from IPP Customer Support, the first email contains the initial administrative IPP User ID. The second email, sent within 24 hours of receipt of the first email, contains a temporary password. You must log in with the temporary password within 30 days.

4. If your company is already registered to use IPP, you will not be required to re-register.

5. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment as authorized by HHSAR 332.7002, a written request must be submitted to the Contracting Officer to explain the circumstances that require the authorization of alternate payment procedures.

d. Invoices that include time and materials or labor hours Line Items must include supporting documentation to (1) substantiate the number of labor hours invoiced for each labor category, and (2) substantiate material costs incurred (when applicable).

e. Invoices that include cost-reimbursement Line Items must be submitted in a format showing expenditures for that month, as well as contract cumulative amounts. At a minimum the following cost information shall be included, in addition to supporting documentation to substantiate costs incurred.

- Direct Labor - include all persons, listing the person's name, title, number of hours worked, hourly rate, the total cost per person and a total amount for this category;

- Indirect Costs (i.e., Fringe Benefits, Overhead, General and Administrative, Other

Indirects)- show rate, base and total amount;

- Consultants (if applicable) - include the name, number of days or hours worked, daily or hourly rate, and a total amount per consultant;

- Travel - include for each airplane or train trip taken the name of the traveler, date of travel, destination, the transportation costs including ground transportation shown separately and the per diem costs. Other travel costs shall also be listed;

- Subcontractors (if applicable) - include, for each subcontractor, the same data as required for the prime Contractor;

mailto:ipp.noreply@mail.eroc.twai.gov

- Other Direct Costs - include a listing of all other direct charges to the contract, i.e., office supplies, telephone, duplication, postage; and

- Fee - amount as allowable in accordance with the Schedule and FAR 52.216-8 if applicable.

f. Contractor is required to attach an invoice log addendum to each invoice which shall include, at a minimum, the following information for contract administration and reconciliation purposes:

(a) list of all invoices submitted to date under the subject award, including the following:

(1) invoice number, amount, & date submitted

(2) corresponding payment amount & date received

(b) total amount of all payments received to date under the subject contract or order

(c) and, for definitized contracts or orders only, total estimated amounts yet to be invoiced for the current, active period of performance.

g. Payment of invoices will be made based upon acceptance by the Government of the entire task or the tangible product deliverable(s) invoiced. Payments shall be based on the Government certifying that satisfactory services were provided, and the Contractor has certified that labor charges are accurate.

h. If the services are rejected for failure to conform to the technical requirements of the task order, or any other contractually legitimate reason, the Contractor shall not be paid, or shall be paid an amount negotiated by the CO.

i. Payment to the Contractor will not be made for temporary work stoppage due to circumstances beyond the control of U.S. Food and Drug Administration such as acts of God, inclement weather, power outages, and results thereof, or temporary closings of facilities at which Contractor personnel are performing. This may, however, be justification for excusable delays.

j. The Contractor agrees that the submission of an invoice to the Government for payment is a certification that the services for which the Government is being billed, have been delivered in accordance with the hours shown on the invoices, and the services are of the quality required for timely and successful completion of the effort.

k. Questions regarding invoice payments that cannot be resolved by the IPP Helpdesk should be directed to the FDA Employee Resource and Information Center (ERIC) Helpdesk at 301-827- ERIC (3742) or toll-free 866-807-ERIC (3742); or, by email at ERIC@fda.hhs.gov. Refer to the Call-in menu options and follow the phone prompts to dial the option that corresponds to the service that's needed. All ERIC Service Now Tickets will either be responded to or resolved within 48 hours (2 business days) of being received. When emailing, please be sure to include the contract number, invoice number and date of invoice, as well as your name, phone number, and a detailed description of the issue.

mailto:ERIC@fda.hhs.gov

Be advised that FDA does not accept documents which contain the use of macros. When submitting documents via email, DO NOT include .exe, .mso, or any other executable file types that could potentially trigger email security protections (i.e. email blocks, quarantine).

Document submissions required throughout the award period(s) shall not have macro enabled functionality and any document delivered having that functionality will be deemed delinquent, if not corrected prior to the due date.

Contractor Performance Evaluation(s) In accordance with FAR Subpart 42.15, FDA will complete annual (interim) and final contractor performance evaluations. Annual evaluations will be prepared to coincide with the anniversary date of the contract. Additional interim performance evaluations may be prepared at Contracting Officer discretion, as necessary. Final performance evaluations will be completed upon contract expiration.

FDA will utilize the Contractor Performance Assessment Reporting System (CPARS) in order to execute annual and final contractor performance evaluations. CPARS is a secure Internet website located at http://www.cpars.csd.disa.mil/cparsmain.htm. FDA will register the contractor in CPARS upon receipt of the name and email address of two (2) individuals who will be responsible for serving as the Contractor’s primary and alternate CPARS contacts. Once FDA registers the contractor in CPARS, the Contractor will receive an automated CPARS email message which contains User IDs and instructions for creating a password.

Once a performance evaluation is issued, the Contractor’s primary and alternate CPARS contact will receive an email instructing them to logon to CPARS in order to review the performance evaluation. The Contractor has 14 days from the date of performance evaluation issuance in which to review the evaluation. If the Contractor is in agreement with the performance evaluation outcome, the evaluation becomes final. Should the Contractor be in disagreement with the performance evaluation outcome, rebuttal comments must be submitted via the CPARS within 14 days from date the evaluation was issued by the FDA. Any disagreement between the Contracting Officer and the Contractor will be referred to a contracting official one level above the Contracting Officer, whose decision will be final.

Copies of each performance evaluation and contractor responses, if any, will be retained as part of the official contract file and will be used to support future award decisions. Evaluations will also be stored for a 3-year period in the https://www.cpars.gov/ system.

Contractors may obtain CPARS training material and register for on-line training at https://www.cpars.gov/lc.htm. There is no fee for registration or use of the CPARS.

Provide the names of two individuals who will be assigned as the CPARS representatives below:

Primary:

Name:

Phone:

E‐mail Address:

Alternate:

http://www.cpars.csd.disa.mil/cparsmain.htm https://www.cpars.gov/ https://www.cpars.gov/lc.htm

Name:

Phone:

E‐mail Address:

Occupational Safety and Health Terms and Conditions

Section I – General Occupational Safety and Health TERMS AND CONDITIONS:

1. The contractor is responsible for ensuring contractor personnel comply with applicable

OSHA requirements, report unsafe conditions or activities to the Contracting Officer’s Representative (COR), and avoid actions and conditions that may result in an accident.

2. The contractor shall submit to the COR a site-specific safety and accident prevention plan and OSHA 300A reports from the past three calendar years.

3. The contractor shall report all workplace incidents, accidents, injuries, and near-misses that occur within the scope of the acquisition (whether OSHA-recordable or not) to the COR by email as soon as possible, but no more than 24-hours after discovery of the incident, illness or injury, or near-miss.

4. The contractor shall provide an investigation report at no cost to the Government for all workplace incidents, accidents, injuries, and near-misses that occur within the scope of the acquisition (whether OSHA-recordable or not) to the COR by email as soon as possible, but no more than 24-hours after the conclusion of the investigation of the incident, illness or injury, or near-miss.

5. The contractor shall report all activities or conditions that pose imminent danger or harm to persons, animals, or Government property immediately upon discovery to FDA Security or directly to local emergency services, as appropriate. In addition, the contractor shall report the incident to the COR immediately thereafter.

6. The contractor shall be responsible for any and all costs, expenses, and other obligations paid or incurred, due to the contractor’s noncompliance with federal, state, and/or local laws or ordinances.

7. As applicable, the contractor shall provide personal protective equipment (e.g., hard hats, safety glasses, work gloves) for anticipated hazards and ensure that contractor personnel wear the prescribed safety and health equipment within the work area, as prescribed by 29 CFR part 1910, Subpart I. The contractor shall provide instructions to personnel on the proper wear, maintenance, and limitations of the personal protective equipment prior to commencement of any work under the acquisition.

8. Prior to bringing any hazardous material to an FDA facility, the contractor shall provide the COR copies of any Safety Data Sheets (SDS) to obtain advance, written authorization.

8.1. Unless otherwise specified in the acquisition, the contractor is responsible for removing any hazardous material, or any material with an SDS, that the contractor brought with them for use at an FDA facility before or during performance of the acquisition.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services (Feb 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) ( 31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712);

this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

_X_ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://www.govinfo.gov/link/uscode/31/3903 https://www.govinfo.gov/link/uscode/10/3801 https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/4655 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27

__(10) 52.204–28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115–390, title II).

__ (11) (i) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

__ (ii) Alternate I (Dec 2023) of 52.204–30.

_X_ (12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) ( 31 U.S.C. 6101 note).

__ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

__ (14) [Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

_X_ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

__ (17) [Reserved] __ (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

_X_ (20) 52.219-8, Utilization of Small Business Concerns (Feb 2024) ( 15 U.S.C. 637(d)(2) and (3)).

__ (21) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Sep 2023) of 52.219-9.

__ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) ( 15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

__ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) ( 15 U.S.C. 637s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran- Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

https://www.govinfo.gov/link/plaw/115/public/390 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

_X_ (26) (i) 52.219-28, Post Award Small Business Program Representation (Feb 2024) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) ( 15 U.S.C. 637(m)).

__ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) ( 15 U.S.C. 637(m)).

__ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)).

__ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15U.S.C. 637(a)(17)).

_X_ (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_X_ (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2024) .

_X_ (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

_X_ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

_X_ (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

_X_ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

_X_ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X_ (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

_X_ (40) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11

__ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

__ (44) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (45) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (46) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) ( 42 U.S.C. 8259b).

__ (47) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (48) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

__ (49) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

__ (50) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (51) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

__ (52) (i) 52.225-1, Buy American-Supplies (Oct 2022) ( 41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

__ (53) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109- 53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II…