Sol_A1_QUESTIONS ANSWERS_75F40124Q00119.pdf
PDF 132 KB Posted
- Attached to
- Mini Spray Dryer System
- Solicitation number
- 75F40124Q00119
About this file
This document contains questions and answers regarding solicitation number 75F40124Q00119 for a Mini Spray Dryer System. The Food and Drug Administration is seeking one full system meeting the salient characteristics outlined in the revised Statement of Work. These include a gas supply of liquid nitrogen stored at 689 kPa and 20C in gaseous form. Quotations must address each salient characteristic and task or may be deemed technically unacceptable. Proposal submissions should follow the instructions in section 3 of the revised RFQ attachment. No preferred vendors were identified by the FDA.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_A1_Revised RFQ Attachment_75F40124Q00119.pdf | ||
| Sol_RFQ Attachment_75F40124Q00119.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOLICITATION QUESTIONS & ANSWERS
Notice ID 75F40124Q00119, Mini Spray Dryer System
Question 1: Are there any vendors the FDA has identified as able to meet the specs, that they would prefer?
Answer 1: This requirement is being solicited on a “meet or exceed basis”. Please refer to the Statement of Work (SOW) for all minimum required salient characteristics that must be met in order for a quotation to be determined technically acceptable. Please be advised that each quoter shall address the different salient characteristics/tasks of the requirement, or the Government may determine the technical response unacceptable.
Question 2: How would you like your proposals submitted?
Answer 2: Please refer to section 3 beginning on page 1 of 'Sol_A1_Revised RFQ Attachment_75F40124Q00119' for quotation submission instructions.
Question 3: I wanted to inquire about the number of Mini Spray Dryer Systems that are needed. Could you please provide some clarification on this?
Answer 3: One full system is required meeting the salient characteristics as outlined within the SOW included within 'Sol_A1_Revised RFQ Attachment_75F40124Q00119'.
Question 4: Our system standard gas supply is 71 Nm^3/hr or 109.6 L/hr of liquid nitrogen when stored, to be supplied at 689 kPa, 20C in gaseous form. Is this acceptable?
Answer 4: No. Please refer to revised SOW section C.4. in 'Sol_A1_Revised RFQ Attachment_75F40124Q00119' for additional gas supply salient characteristic requirements.
File details come from the government source that posted it. Updated .