7119_-_-.pdf

TP: 7119

HULL, MECHANICAL &

ELECTRICAL

Department of Homeland Security

UNITED STATES

COAST GUARD

DISTRIBUTION STATEMENT D - Distribution authorized to DHS, USCG, DoD and their contractors to protect publications required for official use or for administrative or operational purposes only; determined on 22 JUN 2007.

Other requests for this document shall be referred to Commander, USCG Surface Forces Logistics Center, ESD – Tech Info Mgmt Br, 2401 Hawkins Point Road, M/S 25, Baltimore, MD 21226.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE - For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

PUBLISHED UNDER AUTHORITY OF THE U.S. COAST GUARD

SWBS: 311 DATE:

AMENDMENT 11:

22 JUN 2007

30 JUN 2020

TECHNICAL PUBLICATION

SHIP SERVICE DIESEL GENERATOR

(SSDG) - MODEL 3512B

418' WMSL CLASS CUTTERS

FULL EXPORT-CONTROL WARNING STATEMENT

NOTICE TO ACCOMPANY THE DISSEMINATION OF EXPORT-CONTROLLED

TECHNICAL DATA

Export of the attached information which includes, in some circumstances, release to foreign nationals within the United States, without first obtaining approval or license from the Department of State for items controlled by the International Traffic in Arms Regulations (ITAR) or the Department of Commerce for controlled by the Export Administration Regulations (EAR), may constitute a violation of the law.

Under 22 U.S.C. 2778, the penalty for unlawful export of items or information controlled under the ITAR is up to 20 years imprisonment, or a fine of $1,000,000 or both. Under 50 U.S.C., Appendix 2410, the penalty for unlawful export of items or information controlled under the EAR is a fine of up to $1,000,000, or five times the value of the exports, whichever is greater, or for an individual, imprisonment of up to 10 years, or a fine of up to $250,000, or both.

In accordance with your certification that establishes you as a “qualified U.S. contractor,” unauthorized dissemination of this information is prohibited and may result in your disqualification as a qualified U.S. contractor, and may be considered in determining your eligibility for future contract with the Department of Defense.

The U.S. Government assumes no liability for direct patent infringement, contributory patent infringement, or misuse of technical data.

The U.S. Government does not warrant the adequacy, accuracy, currency, or completeness of the technical data.

The U.S. Government assumes no liability for loss, damage, or injury, resulting from the manufacture or use for any purpose of any product, article, system, or material involving reliance upon any or all technical data furnished in response to the request for technical data.

If the technical data furnished by the Government will be used for commercial manufacturing or other profit potential, a license for such use may be necessary. Any payments made in support of the request for data do not include or involve any license rights.

A copy of this notice will be provided with any partial or complete reproduction of these data that are provided to qualified U.S. contractors.

Commander United States Coast Guard Surface Forces Logistics Center

2401 Hawkins Point Road Baltimore, MD 21226 Staff Symbol: ESD – Tech Info Mgmt Br Phone: (410) 582-4725 Fax: (410) 762-6898

30 JUN 2020

MEMORANDUM

From: Mitch Frid, Branch Chief

SFLC-ESD-TIMB

Reply to Attn of:

SFLC-ESD-TIMB-PPDS

R. Infantino

To: Distribution

Subj: Coast Guard Amendment No. 11 for Technical Publication 7119

Ref: SFLC Central Activity 37209, dated 16 MAR 2020; Activity 38473, dated 02 JUN 2020

1. PURPOSE. IAW the ref this memorandum amends Technical Publication 7119, Ship Service Diesel Generator (SSDG) – Model 3512B, by updating and adding information. This technical publication is applicable to the 418’ WMSL Class Cutters.

2. PUBLICATION AFFECTED. Technical Publication 7119

3. ACTION.

a. Technical Publication 7119 is being amended to update the manual to include equipment configuration differences, update an OEM electrical schematic, and add a bearing alignment procedure. This technical publication is being affected by adding hull applicability to individual sections, removing redundant information, updating the drawing for the SSDG Generators, and inserting an alignment procedure.

b. Remove and insert pages as indicated below:

REMOVE INSERT

Cover Page Cover Page Full Export-Control Warning Statement

Technical Manual Deficiency/Evaluation

Report Platform Applicability Sheet Platform Applicability Sheet Technical Manual Deficiency/Evaluation

Report OEM Cover Page Copyright License Table of Contents OEM Change Record

SWBS 311_A

Section Cover Page Section Cover Page Individual Manual Applicability Sheet Individual Manual Applicability Sheet OEM Cover page Copyrights License (2 pages) Copyrights Release (2 pages) OEM Cover Page Table of Contents OEM Record of Change (2 pages) OEM Change Record Table of Contents Section A Caterpillar Manuals Cover

Page

INFANTINO.RICHARD.ALA

N.1020748806

Digitally signed by

INFANTINO.RICHARD.ALAN.1020748806

Date: 2020.06.30 14:44:37 -04'00'

Subj: Coast Guard Amendment No. 11 for Technical Publication 7119 9086

Section 10, Schematic – RENR9311 (4 sheets)

Section 10, Schematic – RENR9311 (8 sheets)

Section 12, Heat Exchanger Cleaning – REHS2599 (14 pages) (after last page of Section 11)

SWBS 311_B

Section Cover Page Section Cover Page Individual Manual Applicability Sheet Individual Manual Applicability Sheet OEM Cover Page Copyrights License (2 pages) Copyrights License (2 pages) OEM Cover Page Table of Contents OEM Change Record (2 pages) OEM Change Record Table of Contents Section B Vendor Manuals Cover Page Section 12, Heat Exchanger Cleaning –

REHS2599 (entire section) Section 14, Vulkan Coupling - Vulastik L

Section Title Page Section 14, Vulkan Coupling - Vulastik L

Section Title Page Section 15, Basler Digital Excitation

Control System - DECS–200 Section Title Page

Section 15, Basler Digital Excitation Control System - DECS–200 Section Title Page

Section 16, National Oilwell Varco Generator – Model T437STT–611 Section Title Page

Section 16, National Oilwell Varco Generator – Model T437STT–611 Section Title Page

Section 16 National Oilwell Varco Generator, Part 1 Model T437STT-611, Section 9 Vendor Information, Page 9-1

Section 16 National Oilwell Varco Generator, Part 1 Model T437STT-611, Section 9 Vendor Information, Page 9-1

Section 16 National Oilwell Varco Generator, Part 1 Model T437STT-611, Section 9 Vendor Information, DECS- 200 (entire manual)

Section 21 - Alignment of Diesel Generator Sets With Two-Bearing Generator (5 pages) (after last page of Section 20)

4. DISTRIBUTION. No paper distribution of this amended technical publication will be provided. An electronic amended master technical publication is maintained by SFLC-ESD-TIMB and is located in the Coast Guard Logistics Information Management System – Surface Technical Information Portal (CGLIMS-STIP) at http://cgweb.netims.uscg.mil:7012/STIP/STIP_EE/. Additionally, the amendment package is available for viewing in CGLIMS-STIP by selecting the Amendments tab in the Technical Publication Detail page; it may be printed to update any hard copy. Annual distribution of all technical data will be distributed via DVD format to each associated unit; the Distribution Schedule is located under the View tab in CGLIMS-STIP. Additional DVDs and hard copies can be ordered via CGLIMS-STIP using the Document Ordering System.

5. REQUEST FOR CHANGES. The technical publication includes a Technical Manual Deficiency/Evaluation Report which links to the CG-22 process. Please use this form to report any discrepancies to the Product Line. All approved changes will be provided by the Product Line for inclusion in the technical publication.

Subj: Coast Guard Amendment No. 11 for Technical Publication 7119 9086

6. REQUEST FOR FEEDBACK. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. Please take a few moments, using the link to the Customer Survey Form below, to let us know your thoughts.

Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use.

SFLC Customer Survey and Suggestion Form https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&novl_url=1

Surface Forces Logistics Center

2401 Hawkins Point Road Baltimore, MD 21226 Phone: (410) 582-4725 Fax: (410) 762-6898

30 MAY 2018

MEMORANDUM

From: Mitch Frid, Branch Chief

SFLC-ESD-TIMB

Reply to Attn of:

SFLC-ESD-TIMB-PPDS

R. Infantino

To: Distribution

Subj: Coast Guard Amendment No. 10 for Technical Publication 7119

Ref: (a) SFLC Central Activity 27508, dated 20 APR 2018, Activity 27277, dated 05 APR 2018, Activity 27466, dated 18 APR 2018

1. PURPOSE. IAW ref (a), this memorandum amends Technical Publication 7119, Ship Service Diesel Generator (SSDG) – Model 3512B; by updating information. This technical publication is applicable to the 418’ WMSL Class Cutters.

2. PUBLICATION AFFECTED. Technical Publication 7119

3. ACTION.

a. Technical Publication 7119 is being amended to replace the Original Equipment Manufacturers (OEM) Electrical Schematic – RENR9311-01, inserting additional information pertaining to the National Oilwell Varco Generator section and adding a new section for the Generator Set Control – EMCP 3.1, 3.2, 3.3.

b. Remove and insert pages as indicated below:

REMOVE INSERT

Cover Page Cover Page Technical Manual

Deficiency/Evaluation Report Technical Manual Deficiency/Evaluation

Report Platform Applicability Sheet Platform Applicability Sheet Table of Contents Table of Contents OEM Change Record page OEM Change Record page

SWBS_311_A

Section Cover page Section Cover page Individual Manual Application Sheet Individual Manual Application Sheet Table of Contents Table of Contents OEM Change Record page OEM Change Record page Section 10, OEM Electrical Schematic –

RENR9311-01 (4 sheets) Section 10, OEM Electrical Schematic –

RENR9311-01 (4 sheets)

SWBS_311_B

Section Cover page Section Cover page

FRID.MITCHELL.104329477

Digitally signed by FRID.MITCHELL.1043294772 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USCG, cn=FRID.MITCHELL.1043294772 Reason: I am approving this document Date: 2018.05.30 06:26:33 -04'00'

Subj: Coast Guard Amendment No. 10 for Technical Publication 7119 9086

30 MAY 2018

REMOVE INSERT

Individual Manual Application Sheet Individual Manual Application Sheet Table of Contents Table of Contents OEM Change Record page OEM Change Record page

Section 16 Table of Contents after Section 16 Title page

Assy, Rot Rectifier (OEM Dwg. 54502) after OEM Dwg. G96288 in Section 16

T437STT-611A AC Synchronous Generator – User Manual after last page of Section 16

Section 20 – Generator Set Control (in its entirety) after last page of Section 19

4. DISTRIBUTION. No paper distribution of this amended technical publication will be provided. An electronic amended master technical publication is maintained by SFLC-ESD-TIMB and is located in the Coast Guard Logistics Information Management System – Surface Technical Information Portal (CGLIMS-STIP) at http://oscls-lims-ap04.osc.uscg.mil:7002/NETIMS/. Additionally, the amendment package is available for viewing in CGLIMS-STIP by selecting the Amendments tab in the Technical Publication Detail page; it may be printed to update any hard copy. Annual distribution of all technical data will be distributed via DVD format to each associated unit; the Distribution Schedule is located under the View tab in CGLIMS-STIP. Additional DVDs and hard copies can be ordered via CGLIMS-STIP using the Document Ordering System.

5. REQUEST FOR CHANGES. The technical publication includes a Technical Manual Deficiency/Evaluation Report which links to the CG-22 process. Please use this form to report any discrepancies to the Product Line. All approved changes will be provided by the Product Line for inclusion in the technical publication.

6. REQUEST FOR FEEDBACK. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. Please take a few moments, using the link to the Customer Survey Form below, to let us know your thoughts. Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use.

SFLC Customer Survey and Suggestion Form https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&novl_url=1 http://oscls-lims-ap04.osc.uscg.mil:7002/NETIMS/

2401 Hawkins Point Road Baltimore, MD 21226 Phone: (410) 582-4725 Fax: (410) 762-6898

OCT 2017

MEMORANDUM

From: Mitch Frid, Branch Chief

SFLC-ESD-TIMB

Reply to Attn of:

SFLC-ESD-TIMB-PPDS

R. Infantino

To: Distribution

Subj: Coast Guard Amendment No. 9 for Technical Publication 7119

Ref: (a) SFLC Central Activity 24583, dated 02 OCT 2017

1. PURPOSE. IAW ref (a) and (b), this memorandum amends Technical Publication 7119, SWBS 311, Ship Service Diesel Generator (SSDG) – Model 3512B; by updating information. This technical publication is applicable to the 418’ WMSL Class Cutters.

2. PUBLICATION AFFECTED. Technical Publication 7119

3. ACTION.

a. Technical Publication 7119 is being amended to replace the Original Equipment Manufacturers (OEM) Operation & Maintenance Manual – SEBU7942.

b. Remove and insert pages as indicated below:

REMOVE INSERT

Cover Page Cover Page Technical Manual Deficiency/Evaluation

Report Technical Manual Deficiency/Evaluation

Report Platform Applicability Sheet Platform Applicability Sheet OEM Change Record page OEM Change Record page

311_A Section Title page Section Title page Individual Manual Application Sheet Individual Manual Application Sheet OEM Change Record page OEM Change Record page Operation & Maintenance Manual –

SEBU7942-03 (in its entirety) Operation & Maintenance Manual –

SEBU7942-05 (in its entirety) 311_B

Individual Manual Application Sheet Individual Manual Application Sheet OEM Change Record page OEM Change Record page

FRID.MITCHELL.1043294772

Digitally signed by FRID.MITCHELL.1043294772 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USCG, cn=FRID.MITCHELL.1043294772 Reason: I am approving this document Date: 2017.10.30 06:48:26 -04'00'

Subj: Coast Guard Amendment No. 9 for Technical Publication 7119 9086

OCT 2017

4. DISTRIBUTION. No paper distribution of this amended technical publication will be provided. An electronic amended master technical publication is maintained by SFLC-ESD-TIMB and is located in the Coast Guard Logistics Information Management System – Surface Technical Information Portal (CGLIMS-STIP) at http://oscls-lims-ap04.osc.uscg.mil:7002/NETIMS/. Additionally, the amendment package is available for viewing in CGLIMS-STIP by selecting the Amendments tab in the Technical Publication Detail page; it may be printed to update any hard copy. Annual distribution of all technical data will be distributed via DVD format to each associated unit; the Distribution Schedule is located under the View tab in CGLIMS-STIP. Additional DVDs and hard copies can be ordered via CGLIMS-STIP using the Document Ordering System.

5. REQUEST FOR CHANGES. The technical publication includes a Technical Manual Deficiency/Evaluation Report which links to the CG-22 process. Please use this form to report any discrepancies to the Product Line. All approved changes will be provided by the Product Line for inclusion in the technical publication.

6. REQUEST FOR FEEDBACK. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. Please take a few moments, using the link to the Customer Survey Form below, to let us know your thoughts. Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use.

SFLC Customer Survey and Suggestion Form https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&novl_url=1

DISTRIBUTION – SDL No. 168 a b c d e f g h i j k l m n o p q r s t u v w x y z A X B X C X X D E F G H

03 April 2017

SHIP SERVICE DIESEL GENERATOR (SSDG)

– MODEL 3512B

SWBS 311

UNITED STATES COAST GUARD

418’ WMSL CLASS CUTTERS

Coast Guard Amendment No. 08 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information contained in Technical Publication 7119, SWBS 311; Ship Service Diesel Generator (SSDG) – Model 3512B.

2. PUBLICATIONS AFFECTED: Technical Publication 7119

3. INFORMATION: Technical Publication 7119 is being amended to provide information associated with the torque sequencing of the engine oil pan. This technical publication is affected by inserting a new Section (Section 19 – Engine Oil Pan Torque Sequence). This information is applicable to the 418’ WMSL Class Cutters.

4. ACTION:

a. Remove and insert pages as indicated below:

Table of Contents Table of Contents OEM Change Record page OEM Change Record page 311_A Table of Contents Table of Contents OEM Change Record page OEM Change Record page 311_B Table of Contents Table of Contents OEM Change Record page OEM Change Record page Section 19 Section 19 (in its entirety) (2 pages)

b. PLEASE NOTE: Distribution for Amendments to Technical Publications has been modified.

Distribution now includes one “paper” copy of Amendment 08 to TP 7119 and a compact disc CD with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

2401 Hawkins Point Road Baltimore, Maryland 21226 Staff Symbol: ESD – Tech Info Mgmt Br

Coast Guard Amendment No. 08 for Technical Publication 7119

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with attention to ESD – Tech Info Mgmt Br. Please provide a brief description of the discrepancy, and recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining our engineering systems and equipment.

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. If you would please take a few moments, using the link to the Customer Satisfaction Survey below, to let us know your thoughts. Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use:

M. FRID

By direction

Enclosure: (1) Technical Manual Deficiency/Evaluation Report (TMDR)

(2) Change pages to TP 7119 https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&novl_url=1

A X B X C X X D E F G H

18 January 2017

SWBS 311

Coast Guard Amendment No. 07 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information contained in Technical Publication 7119,

3. INFORMATION: Technical Publication 7119 is being amended to provide information associated with the National Oilwell Varco Generator and the Crankcase Ventilation (CCV) System. This technical publication is affected by inserting information pertaining to the installation of grease pans on the drive and non-drive ends in Section 16. A new Section (Section 18 - Crankcase Ventilation (CCV) System – Dwg. 498-2847) has been added. This information is applicable to the 418’ WMSL Class Cutters.

Table of Contents Table of Contents OEM Change Record page OEM Change Record page 311_A Table of Contents Table of Contents OEM Change Record page OEM Change Record page 311_B Table of Contents Table of Contents OEM Change Record page OEM Change Record page Section 16 Pages 8-1 and 8-2 Pages 8-1 and 8-2 Bearing System Modifications Section

Title page Bearing System Modifications Section Title page

OEM Drawings GREASE PAN DE and GREASE PAN after last page in the Supplementary 79 (page S79-4)

Commander

Staff Symbol: ESD – Tech Info Mgmt Br

Coast Guard Amendment No. 07 for Technical Publication 7119

Section 18 Section 18 (in its entirety) (3 pages)

Distribution now includes one “paper” copy of Amendment 07 to TP 7119 and a compact disc CD with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with attention to ESD – Tech Info Mgmt Br. Please provide a brief description of the discrepancy, and recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&novl_url=1

A X B X C X X D E F G H

04 October 2016

SHIP SERVICE DIESEL GENERATOR (SSDG)

– MODEL 3512B

SWBS 311

UNITED STATES COAST GUARD

418’ WMSL CLASS CUTTERS

Coast Guard Amendment No. 06 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information contained in Technical Publication 7119, SWBS 311; Ship Service Diesel Generator (SSDG) – Model 3512B.

2. PUBLICATIONS AFFECTED: Technical Publication 7119

3. INFORMATION: Technical Publication 7119 is being amended to provide information associated with the National Oilwell Varco Generator. This technical publication is affected by inserting information pertaining to the Bearing System Modifications. This information is applicable to the 418’ WMSL Class Cutters.

4. ACTION:

a. Remove and insert pages as indicated below:

REMOVE INSERT

Cover Page Cover Page OEM Change Record page OEM Change Record page

311_A Section Cover Page Section Cover Page OEM Change Record page OEM Change Record page

311_B Section Cover Page Section Cover Page OEM Change Record page OEM Change Record page

Section 16 Pages 8-1 and 8-2 Pages 8-1 and 8-2

Bearing System Modifications (30 pages) after OEM Bill of Material 10001283-001

b. PLEASE NOTE: Distribution for Amendments to Technical Publications has been modified.

Distribution now includes one “paper” copy of Amendment 06 to TP 7119 and a compact disc CD with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

Commander United States Coast Guard Surface Forces Logistics Center

2401 Hawkins Point Road Baltimore, Maryland 21226 Staff Symbol: ESD – Tech Info Mgmt Br

Coast Guard Amendment No. 06 for Technical Publication 7119

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information

SFLC Customer Satisfaction Survey and Suggestion Form http://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&vibeonprem_url=1

06 September 2016

SWBS 311

Coast Guard Amendment No. 05 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information contained in Technical Publication 7119,

3. INFORMATION: Technical Publication 7119 is being amended to provide information associated with the Vulkan Coupling. This technical publication is affected by inserting the Technical Data information for the Vulastik L Coupling. This information is applicable to the 418’ WMSL Class Cutters.

Platform Applicability Sheet Platform Applicability Sheet OEM Change Record page OEM Change Record page 311_A Individual Manual Application Sheet Individual Manual Application Sheet OEM Change Record page OEM Change Record page 311_B Individual Manual Application Sheet Individual Manual Application Sheet OEM Change Record page OEM Change Record page Section 14

Vulastik L Technical Data information after last page of Section 14

A X B X C X X D E F G H

Commander

Staff Symbol: ESD – Tech Info Mgmt Br

Coast Guard Amendment No. 05 for Technical Publication 7119

Distribution now includes one “paper” copy of Amendment 05 to TP 7119 and a compact disc CD with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information http://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&vibeonprem_url=1

16 December 2015

SWBS 311

418’ MARITIME SECURITY LARGE CLASS CUTTER

Coast Guard Amendment No. 04 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information contained in Technical Publication 7119,

3. INFORMATION: Technical Publication 7119 is being amended to provide information associated with the EMCP3 Diagnostic Trouble Code List for troubleshooting. This technical publication is affected by inserting the Service Information System Bulletin – Troubleshooting – EMCP3. This information is applicable to the 418’ Maritime Security Large Class Cutters.

Report Technical Manual Deficiency/Evaluation

Report Platform Applicability Sheet Platform Applicability Sheet OEM Change Record page OEM Change Record page 311_A Individual Manual Application Sheet Individual Manual Application Sheet OEM Change Record page OEM Change Record page Section 11 Pages 1 thru 32 before RENR7902-07 311_B Individual Manual Application Sheet Individual Manual Application Sheet OEM Change Record page OEM Change Record page

DISTRIBUTION – SDL No. 167

A X B X C X X D E F G H

Commander

Staff Symbol: ESD – Tech Info Mgmt Br Phone: 410 762-6814 Fax: 410 762-6898

Coast Guard Amendment No. 04 for Technical Publication 7119

Distribution now includes one “paper” copy of Amendment 04 to TP 7119 and a compact disc CD with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information

Enclosure: 1 Change pages to TP 7119 http://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&vibeonprem_url=1

29 April 2015

SWBS 311

Coast Guard Amendment No. 03 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information contained in Technical Publication 7119,

3. INFORMATION: Technical Publication 7119 is being amended to provide information associated with the generator set control menu structure and the Vulkan coupling. This technical publication is affected by inserting the missing foldouts for the generator set control menu structure and additional information pertaining to the Vulkan coupling. This information is applicable to the 418’ Maritime Security Large Class Cutters.

Report Technical Manual Deficiency/Evaluation

Report Platform Applicability Sheet Platform Applicability Sheet OEM Title page OEM Title page OEM Change Record page OEM Change Record page 311_A Section A Title page Section A Title page Individual Manual Application Sheet Individual Manual Application Sheet OEM Title page OEM Title page OEM Change Record page OEM Change Record page Section 11 RENR7902-07 page 149 RENR7902-07 pages 149 thru 154

DISTRIBUTION – SDL No. 166

A X B X C X X D E F G H

Commander

Staff Symbol: ESD – Tech Info Mgmt Br Phone: 410 762-6646 Fax: 410 762-6898

Coast Guard Amendment No. 03 for Technical Publication 7119

311_B Section B Title page Section A Title page Individual Manual Application Sheet Individual Manual Application Sheet OEM Title page OEM Title page OEM Change Record page OEM Change Record page

Section 13 OEM Memorandum – insert before Section Table of Contents Coupling Operating Manual – insert after last page in Section

b. PLEASE NOTE: Distribution for Amendments to Technical Publications has been modified.

Distribution now includes one “paper” copy of Amendment 03 to TP 7119 and a compact disc CD with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with attention to ESD – Tech Info Mgmt Br. Please provide a brief description of the discrepancy, and recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining our engineering systems and equipment.

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. If you would please take a few moments, using the link to the Customer Satisfaction Survey below, to let us know your thoughts. Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use:

http://sflccentral.uscg.mil/forums/elc/dispatch.cgi/survey/newDocForm/fol/100001/cmd456387057

M. FRID

Enclosure: 1 Change pages to TP 7119

19 December 2013

SHIP SERVICE DIESEL GENERATORS - MODEL 3500B

SWBS GROUP(S) 311

Coast Guard Amendment No. 02 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to update information for the Ship Service Diesel Generator.

2. PUBLICATION(S) AFFECTED: Technical Publication 7119

3. INFORMATION: This Publication is being amended to replace Section 15, National Oilwell Varco

Instruction and Service Manual for Alternating Current Synchronous Generator, Model: T437STT-611.

Additionally, this Publication is being divided into two (2) Sections; 311_A, SSDG – Model 3500B – Caterpillar Manuals and 311_B, SSDG – Model 3500B – Miscellaneous Vendor Manuals. This information is applicable to the 418’ WMLS Class Cutters.

Staff Symbol: ESD – Tech Info Mgmt Br Phone: (410 )762-6646 Fax: (410 )762-6898

Platform Applicability Sheet (after the Letter of Promulgation)

Individual Manual Application Sheet Page i, Table of Contents Page i, Table of Contents Page ii, Change Record Page ii, Change Record 311_A

Section Cover Page (in front of Section A)

Individual Manual Application Sheet (after Section Cover Page)

Table of Contents (after Change Record)

311_B

Section Cover Page (in front of Section B)

Individual Manual Application Sheet (after Section Cover Page)

Table of Contents (after Change Record)

Section 15, National Oilwell Varco Generator

Section 15, National Oilwell Varco Generator

Enclosure: (1) Change pages to TP 7119 Distribution List: (See page 3) http://sflccentral.uscg.mil/forums/elc/dispatch.cgi/survey/newDocForm/fol/100001/cmd456387057

Coast Guard Amendment No. 02 for Technical Publication 7119

DISTRIBUTION LIST:

UNIT COPIES OPFAC

SFLC-LRE-ENG-SES1 (1) 52000

CG BASE ALAMEDA NAVAL ENG DEPT (N) (1) 31090-N

CG MAT WMSL ALAMEDA, CA (1) 53015

CGC BERTHOLF (WMSL 750) (1) 11701

CGC WAESCHE (WMSL 751) (1) 11702

CGC STRATTON (WMSL 752) (1) 11703

SHIP SERVICE DIESEL GENERATORS

MODEL 3500B

SWBS 311

UNITED STATES COAST GUARD

418’ MARITIME SECURITY LARGE CLASS CUTTERS

Coast Guard Amendment No. 1 for Technical Publication 7119

1. PURPOSE: The purpose of this Amendment is to add a troubleshooting chart to Technical Publication 7119.

2. PUBLICATION AFFECTED: Technical Publication 7119

3. INFORMATION: A chart measuring exhaust temperatures is being added to Technical Publication 7119, applicable to the 418’ Maritime Security Large Class Cutters.

SWBS 311-A

Change Record Change Record Pages 59 thru 60, “RENR9310 – Troubleshooting Section”

Pages 59 thru 60, “RENR9310 – Troubleshooting Section”

Page 60A, Exhaust Temperature Chart

Distribution now includes one “paper” copy of Amendment 1 to TP 7119 and a compact disc (CD) with electronic files enclosed. These files include the Amendment as a separate and distinct file and also a Technical Publication file with the Amendment merged. Either may be printed for duplication, as required.

c. Check this publication to ensure that it is complete. Report any discrepancies to this command, with recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining our engineering systems and equipment.

Staff Symbol: ESD – Tech Info Mgmt Br Phone: (410 )762-6646 Fax: (410 )762-6898

18 April 2013

d. The Surface Forces Logistics Center is very interested in your thoughts regarding this technical information package. If you would please take a few moments, using the link to the Customer Satisfaction Survey below, to let us know your thoughts. Every survey will be reviewed with the intention of making our products and services a valuable resource for your future use:

http://elccentral.uscg.mil/forums/elc/dispatch.cgi/survey/newDocForm/fol/100001/cmd456387057

Enclosure: (1) Change pages to 7119

Distribution: (See page 3) http://elccentral.uscg.mil/forums/elc/dispatch.cgi/survey/newDocForm/fol/100001/cmd456387057

DISTRIBUTION:

AM # 1 to TP-7119

UNIT COPIES OPFAC

SFLC-LRE-ENG-SES1 (1) 52000

NESU ALAMEDA – NO DISTRIBUTION - 51252

ESU ALAMEDA – CD ONLY 1 53700

NESU WAT ALAMEDA – NO DISTRIBUTION - 51252

USCGC BERTHOLF (1) 11701

USCGC WAESCHE – CD ONLY NO ANNUAL (1) 11702

USCGC STRATTON (1) 11703

22 June 2007

LETTER OF PROMULGATION

SHIP SERVICE DIESEL GENERATORS

SWBS 311

1. PURPOSE: This letter promulgates Technical Publication 7119 for the Ship Service Diesel Generators on board the CGC BERTHOLF, Hull 750.

2. PUBLICATION AFFECTED: Technical Publication 7119

3. INFORMATION: Technical Publications for the 418’ Maritime Security Large Class Cutter are being promulgated and being placed into the Coast Guard Technical Information Management System (CG-TIMS) repository as individual manuals with specific Technical Publication numbers. This letter addresses the Ship Service Diesel Generators on board the CGC BERTHOLF.

a. Engineering Officer: Upon receipt of this Technical Publication, augment your unit’s technical publication library with TP 7119.

b. Check this publication to ensure that it is complete. Report any discrepancies to this command, with attention to ELC-05T. Please provide a brief description of the discrepancy, and recommended remedy, such as marked up pages or copies of new sections to be added. Please continue to submit corrections to this publication as they are identified. Your personal efforts to update technical publications will help to ensure that both maintenance and support personnel remain vigilant in sustaining our engineering systems and equipment.

Enclosure: (1) Technical Publication 7119

Distribution: (See page 2)

Commanding Officer United States Coast Guard Engineering Logistics Center

2401 Hawkins Point Road Baltimore, Maryland 21226 Staff Symbol: (05T) Phone: (410 )762-6265 Fax: (410 )762-6898

DISTRIBUTION:

Technical Publication

TP 7119

UNIT PROJECT CODE COPIES OPFAC

MLCPAC (vs) 1 (75170)

NESU ALAMEDA 1 (51252)

TRA CEN YORKTOWN (tew-em) 1 (63100)

USCGC BERTHOLF 1 (11701)

TECHNICAL MANUAL

DEFICIENCY / EVALUATION

REPORT

ANY DEFICIENCIES DETECTED

WITHIN THIS PUBLICATION SHOULD

BE REPORTED BY SUBMITTING A

CG-22 Maintenance/Publication Feedback.

http://sflccentral.uscg.mil/ssf/a/do?

p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00ef233c71&binderId=130&action=add_folder_entry&vibeonprem_url=1

Maintenance/Publication Feedback (CG-22) Process Guide https://cg.portal.uscg.mil/units/sflc/SFLCDirectivesLibrary/CGTO_PG-85-00-20-G.pdf

IN THE EVENT OF LOSS IN CONNECTIVITY, CALL SFLC-ESD-TIMB (410-582-4725)

https://cg.portal.uscg.mil/units/sflc/SFLCDirectivesLibrary/CGTO_PG-85-00-20-G.pdf https://sflccentral.uscg.mil/ssf/a/do?p_name=ss_forum&p_action=1&entryType=8aa6c087485af90c01485b00da8a3c53&binderId=116&action=add_folder_entry&vibeonprem_url=1

RECORD OF CHANGES

TP NO. ______

DATE AMEND. NO. NAME SIGNATURE EFFECTIVE DATE

PLATFORM APPLICABILITY SHEET

Technical Publications Number

Technical Publication Title

SHIP SERVICE DIESEL GENERATOR (SSDG) –

MODEL 3512B

SWBS SWBS Element Title

– Section Equipment Functional

Description Applicability

Asset Subclass Hulls Notes

– FRONT MATTER 418-WMSL

418A-WMSL 750, 751, 752, 753, 754,

755, 756, 757, 758 750-WMSL

750A-WMSL 750, 751, 752, 753, 754,

755, 756, 757, 758 750-WMSL

311 SHIP SERVICE POWER GENERATION

Section Equipment Functional Description

Applicability

Asset Subclass Hulls Notes

A

SHIP SERVICE DIESEL

GENERATOR (SSDG) –

MODEL 3512B –

CATERPILLAR MANUALS

418-WMSL

418A-WMSL 750, 751, 752, 753, 754,

755, 756, 757, 758 750-WMSL

750A-WMSL 750, 751, 752, 753, 754,

755, 756, 757, 758 750-WMSL

B

SHIP SERVICE DIESEL

GENERATOR (SSDG) –

MODEL 3512B –

MISCELLANEOUS

VENDOR MANUALS

418-WMSL

418A-WMSL 750, 751, 752, 753, 754,

755, 756, 757, 758 750-WMSL

750A-WMSL 750, 751, 752, 753, 754,

755, 756, 757, 758 750-WMSL